Airwell DC Inverter XLLDCI30RC User manual

XLLDCI30RC - GCLDCI30RC
PROGRAMMING AND OPERATIONAL MANUAL

1
Air Filtration.

2
9
10
11
12
13
14
15
1
2
3
4
5
6
7
8
16 17 18
10. Power Cord.
(Only for Outdoor Unit
Power Supply)
11. Power Cable.

3
Designed to create comfortable sleeping conditions. When in COOLING mode,
the temperature rises one degree centigrade after each consecutive hour, up
to three hours, from the start of the mode. The temperature rise prevents the
feeling of over-cooling while sleeping (when your body is at rest). In HEATING
mode the reverse occurs; the air conditioner lowers its temperature one degree
every hour, up to three hours, from the start of the mode. When in SLEEP mode,
the air conditioner will be automatically turned off after operated for eight hours.
The result is a more comfortable and invigorating sleep, which leaves you feeling
fresh and energetic in the morning.

4
Filter indicator on the indoor unit display is turned on when the filter requires
cleaning. After cleaning and reinstalling the filter, It should be reset.
Automatic swing of Horizontal air flow in Horizontal direction. The flap move
automatically in right and left direction to spread the conditioned air evenly
throughout the room.

5
ON- UNIT OPERATION
If the air-conditioner cannot be operated by the Remote Control unit,
it can be turned on for cooling or heating, or completely turned off,
by pressing MODE button (H) on the air-conditioner. The MODE
button will change the operating status of the unit between-
COOLING-HEATING-STAND-BY positions, every time it is pressed,
Indicators (G), (I) or (A) will light up respecitively, to indicate in which
mode the air-conditioner operates.
ON-UNIT INDICATORS AND CONTROLS
MODE
COOL
SAFTY SW
HEAT
RESET
A. Stand-by/Operation indicator
B. ESF/Ionizer indicator
C. LCD operation display
D. Signal receiver
E. Timer indicator
F. Filter indicator
G. Cooling indicator
H. Unit mode button
. Heating indicator
J. Electrostatic filter safety button
K. Reset button
L. Ionizer indicator
M. Ionizer on/off
Lights up in red when
connected to power.
Lights up in green during
operation.
Lights up when the E.S.F
or Ionizer operation.
Receiver signals from the
remote control.
Lights up during timer and
sleep operation.
Lights up when air filter requires
cleaning.
Lights up only when mode
(H) is pressed.
Used to switch the unit off or turn
it on for cooling or heating without
the remote control.
Lights up when mode (H) is
pressed.
Turn off the Electrostatic filter
when you open the grill.
Press to turn off the filter
indicator and to reset the
filter function, after the cleaned
filter has been reinstalled.
Press to cancel the buzzer
announcer.
Lights up during the ionizer is
open.
Used to switch the ionizer on or off.

7
K
The electronic filter should be removed from the unit
and cleaning once three month. The procedure is shown
as following:
The air purifying filter should be removed from the
F
F

8