Airwell RCW4 User manual

TECHNICAL MANUAL
RCW4 vs RCW3
Wiring RCW4 vs RCW3
Object :
This bulletin is explaining the method to connect mix
wired remote controller RCW4 (accessory code 7ACEL1613)
vs RCW3 (part code G30294219_K51264).
Février 2017
RCW4
RCW3

Method :
Reminder :
Wired remote RCW4 Wired remote RCW3
Quantity by installation = 1 Quantity by installation = 1
per indoor unit
For the wiring, it is requested to order cable G40113325.
Quantity by installation = 1 per indoor unit

Wiring :
[SETTING OF WIRED REMOTE CONTROLLERS RCW3 & RCW4 ]
RCW3 setting
All the remote RCW3 must set separately !
Step 1 :RCW3 is OFF status.
Step 2 : Hold simultaneously “Function” and “mode“ during 5
secondes till hearing a Bip sound.
Step 3 : Set for each indoor unit a different address by using
arrows buttons..
Step 4 : Press Enter/Cancel button to validate setting.

RCW4 setting
Step 1 : RCW4is OFF status.
Step 2 : Start automatic addressing hold simultaneously “Mode“
&“Thu“ buttons during 5 secondes.
Step : Addressing procedure is requesting about 10 minutes and
will end when on the RCW4 will display all indoor units
addresses.