AIS C-TACKINSTALLL User manual

© 2013, AIS
Phone: [phone] Fax: [phone] Web: www.ais-inc.com
Catalog Product Date
All 01.30.13 1 of 2
Details
Wall Mounted Tack boards are installed by attaching clips directly to the wall, then attaching the tack board to the clips.
The tack board has pre-installed screws which the clips will hook onto.
Mounting Clip
Tack board
Step 1 - Placement
Place the tack board on the wall and softly tap the
locationswherethe pre-installed screwsareon the back.
This will dent/mark the wall with locations you will need.
Note: Useasoft mallet toavoiddamaging the tackboard
or loosening the screws on the back.
Note: Use a hard surface (wood block, metal plate,
etc...) to protect the fabric from damage when tapping
the tack board.
IMPORTANT: The tack board will require 5/8” of space
abovethefinalplacementlocationinorderto be installed.
Please plan either to mount the tackboards first or allow
forthisspacebetween the tackboardandanyoverheads
in use.
Step 2 - Attach Brackets to the wall.
Usingthemarksfrom step 1,mountthebracketsonto the
wall with the supplied clip screws. Align the clip so you
can see the mark through the “U” in the top of the clip.
Wall Mounted Tack boards (C-TACKINSTALLL) V2
Wall Mark
Clip Screws
Wall Mark
Allow for 5/8”
for overheads
5/8”
Pre-installed
screws
!Marks left by
screw heads
Predrill and use appropriate light duty wall anchors.

© 2013, AIS
Phone: [phone] Fax: [phone] Web: www.ais-inc.com
Catalog Product Date
All 01.30.13 2 of 2
Details
Wall Mounted Tack boards are installed by attaching clips directly to the wall, then attaching the tack board to the clips.
The tack board has pre-installed screws which the clips will hook onto.
Wall Mounted Tack boards (C-TACKINSTALLL) V2
Step 3 - Install the Tack board
Usingthemarksfrom step 1,mountthebracketsonto the
wall with the supplied clip screws. Align the clip so you
can see the mark through the “U” in the top of the clip.
Clip to screw detail
Tack
board
screw
Clip screws
(in wall with anchors)
Clip
Step 4 - Cord Groove
For tackboards with a tasklight groove, install the
pressure fit sleeve onto the top of the tack board as
shown.
Tack board sits 3/16” off the wall
3/16”