Akai CEU7300-BT User manual

INSTRUCTION MANUAL
Bluetooth Speakers with
USB/ SD/ AUX & FM Radio
Thank you for purchasing this Bluetooth Speakers. Please read this instruction manual carefully
before using this product to ensure proper use. Keep this manual in a safe place for future
reference.
CEU7300-BT

EN - 1
WARNINGS
C A UTION:T O P R EVENT T HE RISK O F
ELECTRIC SHOCK, DO NOT REMO V E
COVER OR BACK. NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED PERSONNEL.
CAUTION
RISKOF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF
FIRE OR SHOCK HAZARD, DO NOT EXPOSE
THIS PRODUCT TO RAIN OR MOISTURE.
This symbol is intended to alert you to
the presence of uninsulated dangerous
voltage within the product’s enclosure
that might be of sufficient magnitude to
constitute a risk of electric shock. Do
not open the product’s case.
This symbol is intended to inform you
t h at important operating and
maintenance instructions are included
in the literature accompanying this
product.
DRIPPING WARNING
The product shall not beexposed to dripping or
splashing and that no objects filled with liquids,
such as vases, shall be placed on the product.
VENTILATION WARNING
The normal ventilation of the product shall not be
impeded for intended use.
Warning: Changes or modifications to this unit not
expressly approved by the party responsible for
This device complies with Part 15 of
the FCC Rules. Operation is subject
to the following two conditions: (1)
this device may not cause harmful
interference, and (2) this device must
accept any interference recieved,
including interference that may cause
undesired operation.
compliance could void the user’s authority to
operate the equipment.
Class ll equipment symbol
This symbol indicates that the power
adaptor has a double insulation system.
This equipment complies with FCC’s and IC’s RF
radiation exposure limits set forth for an
uncontrolled environment. The antenna(s) used for
this transmitter must be installed and operated to
provide a separation distance of at least 20 cm from
all persons and must not be collocated or operating
in conjunction with any other antenna or transmitter.
Installer must ensure that 20 cm separation
distance will be maintained between the device
and user.
FCC RADIATION EXPOSURE
STATEMENT
DECLARATION DE LA FCC RELATIVE
A L'EXPOSITION AU RAYONNEMENT
Cet appareil est conforme aux limites d'exposition
au rayonnement RF stipulées par la FCC et IC pour
une utilisation dans un environnement non contrôlé.
Les antenne utilisées pour cet émetteur doivent être
installées et doivent fonctionner à au moins 20 cm
de distance des utilisateurs et ne doivent pas être
placées près d’ autres antennes ou émetteurs ou
fonctionner avec ceux-ci. Les installateurs doivent
s'assurer qu’une distance de 20 cm sépare
l’appareil des utilisateurs.
DC voltage
Caution
Please refer for further information to the user manual
RECYCLING
This product bears the selective sorting symbol for
Waste electrical and electronic equipment (WEEE).
This means that this product must be handled pursuant
to European directive 2012/19/EU in order to be
recycled or dismantled to minimize its impact on the
environment.
User has the choice to give his product to a competent
recycling organization or to the retailer when he buys
an new electrical or electronic equipment.
Polarity of d.c. power connector
FCC ID : OWT-CEU7300BT

EN - 2
FCC AND CANADIAN ICES
IMPORTANT SAFETY INSTRUCTIONS
NOTE: This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatus as set out in the radio interference regulations of Industry Canada.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux
appareils numériques de Classe B prescrites dans le règlement sur le brouillage radioélectrique édicté par
Industrie Canada.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television (which can be
determined by turning the equipment off), the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced / TV technician for help.
1. Read these Instructions.
2. Keep these Instructions.
3. Heed all Warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. When the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid
injury fromtip-over.
Portable Cart Warning
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture , does not operate normally,
or has been dropped.

EN - 3
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Avertissement: pour réduire le risque d’incendie ou de choc électrique, ne pas exposer cet appareil
sous la pluie et l’humidité.
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such
as vases, shall be placed on apparatus.
L’appareil ne doit pas être exposé aux écoulements ou aux éclaboussures et aucun objet ne contenant
de liquide, tel qu’un vase, ne doit être placé sur l’objet.
The MAINS plug / power adaptor is used as the disconnect device, it should remain readily operable
during intended use.
In order to disconnect the apparatus from the mains completely, the main plug / power adaptor should
be disconnected from the mains socket outlet completely.
La prise du secteur ne doit pas être obstruée ou doit être facilement accessible pendant son utilisation.
Pour être complètement déconnecté de l’alimentation d’entrée, la prise doit être débranchée du secteur.
WARNINGS:
Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
Les piles ne doivent pas être exposées à de forte chaleur, tel qu’à la lumière du soleil, au feu ou
autres choses de semblable.
IMPORTANT SAFETY INSTRUCTIONS
Caution Marking and rating plate was located at bottom enclosure of the apparatus.
Les marquages sont inscrits en bas de l'appareil.
Les précautions d'emploi sont inscrites en bas de l'appareil.
Under the environment with electrostatic discharge the sample may malfunction and need user
reset to recover sometimes.
Dans l'environnement Avec l'échantillon mai dysfonctionnement de décharge électrostatique et besoin
de récupérer la réinitialisation de l'utilisateur Parfois.
BATTERY WARNING

WHAT’S IN THE BOX
EN - 4
Contents
1. Bluetooth Speakers
4. Instruction Manual
5. Warranty Card
If you are missing any parts above, please contact ADT Digital LLC.
Tel: [phone]
Fax: [phone]
2. USB Charging /AUX IN Cable Combo
3. Dynamic Microphone

CONTROL LOCATION
EN - 5
RECHARGE THE BATTERY OF THE MACHINE
POWER ON THE UNIT
Insert USB cable (small end) into the top of the machine’s micro USB jack. Insert the other
end into an USB port for charging the machine. You can find these ports from computer or
sockets with USB.
1.Toggle the ON/OFF switch to ON at the top to turn on the machine. The LED on the
volume knob and the mirror will light up.
2. Toggle the ON/OFF switch to OFF to turn off the machine.
3. Refer to different mode operation to start operating the unit.
USB cable
2
1
5
3
4
Top Panel
1. Mic Jack
2. Micro USB (DC IN 5V)
/ AUX IN Jack
3. USB Port
4. TF Card Slot
5. ON/OFF Switch

CONTROL LOCATION
EN - 6
68
9
10
7
Front Panel
6. Mode Button
7. Play / Pause
8. Volume Knob
9. Skip Backward
10. Skip Forward
BLUETOOTH OPERATION
FM OPERATION
1) Power on the product or press MODE button to enter Bluetooth mode.
2) Open Bluetooth device (mobile phone or computer, etc.) Bluetooth function, search
Bluetooth device and look for the Bluetooth name - "CEU7300BT".
3) Select the device which will then pair automatically.
(Usually it isn’t necessary to enter a password, special models are prompted
to enter a password. You can enter "0000")
4) The device has been paired successfully. For next time it will connect automatically.
(Note: enter Bluetooth mode within 10 seconds, the Bluetooth device will automatically
find and mate connector to connect manually after 10 seconds)
5) You can now play the music with your Bluetooth device.
6) Turn the Volume Knob in clockwise or anti-clockwise direction to increase or decrease
volume level.
1) Power on the product or press MODE button to enter FM mode.
2) Press and hold Play/ Pause button to auto search local FM radio stations.
3) Press Skip backward or forward buttons to go to previous or next radio station.
4) Turn the Volume Knob in clockwise or anti-clockwise direction to increase or decrease
volume level.

TF CARD & USB OPERATION
1) Insert TF card or USB into TF card slot or USB port.
2) The machine would start to play TF card or USB MP3 file automatically. If it is not, press
mode button to toggle to TF card or USB mode.
3) Press Play/ Pause button to temporary stop playing the music. Press again to resume.
4) Turn the Volume Knob in clockwise or anti-clockwise direction to increase or decrease
volume level.
5) Press Skip Forward/ Backward button to select the next / previous song you want to play.
AUX IN OPERATION
1) Connect the headphone, earphone, line-out jack from an external audio player (such
as MP3 player or discman) to the AUX IN jack on the machine by the supplied USB/
Aux-in combo cable.
2) Power on the unit as previous procedures. Press MODE button to turn it to Aux In
mode.
3) Power on the connected external player and start playback as usual.
4) Adjust the volume level with the volume knob.
CARE AND MAINTENANCE
1. Place the unit on a level surface away from sources of direct sunlight, excessive heat caused by
heating equipment, humidity, rain or sand.
2. Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other
protective material should be placed between it and the furniture.
3. Do not clean your unit by water directly. Clean the unit with a soft, clean cloth slightly moistened with
plain lukewarm water only.
4. Stronger cleaning agents, such as Benzene, thinner or similar materials can damage the surface of
the unit.
5. Do not attempt to disassemble your product.
6. Do not paint your product with lacquer or aerosol.
7. Do not drop, throw or try to bend your product.
8. Do not expose your product to open flames.
EN - 7

SPECIFICATION
EN - 8
Specifications are typical, individual units might vary. They are subject to continuous
improvement without notice and without incurring any obligation.
Audio Section
Output power
Frequency response
SNR
Battery
Power supply
Dimensions
Weight
2 x 3W RMS
100 Hz - 20 kHz
≥80 dB
THD ≤1% (1W 1kHz)
Built-in Lithium Battery 1200mAH
6.5 x 10.1 x 7.3 inches / 16.3 x 25.5. x 18.3 cm
DC5V 0.5A or USB Power
3.6 lbs / 1.6 kg
TROUBLE SHOOTING
Check the connection of the
AC/DC adaptor between the unit
and wall outlet.
Volume control is set at minimum
or mute.
Check that the volume control is
NOT at minimum.
Check that it is not set to mute.
The volume control of external BT
player (or audio player) is too low.
No sound
No power when
POWER is on
Increase the volume of external
BT player (or audio player).
PROBLEM POSSIBLE CAUSE SOLUTION
No sound in
Bluetooth (BT) mode
The pairing had not been done
properly.
Check if you have pairing or not.
It needs to pair the external BT
player and the speaker with
password “0000” or “1234” before
1st time listening.
AC/DC adaptor is not plugged into
a wall outlet or the connector is not
plugged into the power supply or
the DC IN jack of the unit.