ALcom AT6600 User manual

Thank you for purchasing this ALCOM Telephone.
We recommend you to read this manual and familiarize
the functions of this unit before use.
Features
•F K & DTMF caller systems compatible
•12 digit 38 groups incoming memories
•12 digit 5 groups outgoing memories
•38 VIP memories
•5 digit local area code
•Pre-dial up to 32 digit number
•Calculator function
•Alarm clock function
•Hold on music
•Blue light LCD
•Auto redial function
Installation Instruction
a) Apply for the Caller ID service
For your caller ID display unit to function, you may apply with
the local Telephone service provider for the Caller ID service,
otherwise the phone would not be able to display the Caller

ID information.
b) Installation
Open the battery cover on back of the unit.
Insert 3 x AA batteries (1.5V) according to assigned
direction.
Close the battery cover.
Using the coil cord connect the telephone with handset.
Using the line cord connect the telephone to the
telephone wall socket.
NOTE: Do not mix different types of batteries.
Operation Guide
1. Basic Setting menu
a) et Date & Time
Note: In FSK Caller ID mode Date & time will a to set for a first incoming
call, however the YEAR has to be set man ally.
In On-hook state, press SET button, SEt 1 dAtE shows
in the LCD, press SET button again to confirm.
The cursor of year will blink, press UP/- or DOWN/+
button to adjust, press SET button to confirm and enter
next step.
The cursor of month will blink, press UP/-or DOWN/+
button to adjust, press SET button to confirm and enter
next step.

The cursor of day will blink, press UP/- or DOWN/+
button to adjust, press SET button to confirm and enter
next step.
The cursor of hour will blink, press UP/-or DOWN/+
button to adjust, press SET button to confirm and enter
next step.
The cursor of minute will blink, press UP/- or DOWN/+
button to adjust, press SET button to confirm, then finish
the setting.
After you finish above setting, LCD will show the set
date and time and show the next available menu.
Press DEL button to exit.
b) et the local area code (Not applicable for use in ingapore)
On-hook state, press SET button once, SEt 1 dAtE
shows in the LCD, press UP/- button once, SEt 2 COdE
will show in the LCD.
Press SET button to confirm, COdE ------ will display,
and the first cursor “-“ will blink
Note:The previo s code will be shown if yo had set before.
Press UP/- or DOWN/+ button to adjust the number
from 0 to 9.
Press SET button to confirm and enter the second digit,

and so on. LCD will show the next available menu.
Press DEL button to exit.
c) et the PABX code
On-hook state, press SET button once, SEt 1 dAtE will
show in the LCD.
press UP/- button twice, SEt 3 PCOdE will show in the
LCD.
Press SET button to confirm, PCOdE - - will display,
and the first cursor “- -“ will blink
Note: The previo s PABX code will be shown if yo have set before.
Press UP/- or DOWN/+ button to set the first PABX
code from “–“or 0 to 9, press SET button to confirm and
enter the second digit.
Press UP/- or DOWN/+ button to set the second PABX
code from “–“or 0 to 9 , press SET button to
confirm.LCD will show the next available menu.
Press DEL button to exit.
Example: To set yo r PABX o t dial code 9 with pa se enter “9-“.
To set yo r PABX o t dial code 9 witho t pa se enter “-9”.
d) et the Alarm Clock
In On-hook state, press SET button once, SEt 1 dAtE

will show in the LCD.
Press UP/- button six times, SEt 7 ALErt will show in
the LCD.
Press SET button to confirm, 1 00-00 OFF will display.
(1 indicates the first gro p alarm yo can set p to 3 gro p alarm,00-00
indicates the alarm time, OFF indicates ALARM stat s)
Press UP/- or DOWN/+ button to choose group then
press SET button, first digit will blink, choose the digit by
pressing UP/- or DOWN/+ button then press SET to
continue to next digit.
After setting all 4 digits, press SET button, OFF will
blink.
Press UP/- or DOWN/+ button to choose alarm OFF or
ON, then press SET button to confirm.LCD will show the
next available menu.
Press DEL button to exit.
2. Caller D menu
In On-hook status, when there is an incoming call, LCD
shows NEW, incoming Call Log number & phone number.
•The LCD shows REP for a repeat call.
•The LCD shows ---P--- for a private call.
•The LCD shows ---O--- for a overseas call.
•The LCD show the ---E--- for an error call.

Check the incoming calls
On-hook status, press UP/- or DOWN/+ button to
review the call number, date and time. If you hold
the UP/- or DOWN/+ button for 3s, it will review
quickly.
Press DEL button once if you need to delete the
current number.
Hold the DEL button for 4s if you need to delete the
all incoming calls.
Call back an Incoming call
When reviewing the incoming calls if you need to
call the displayed number press ARD button once
and the phone will dial to that number.
Press ARD button twice if you need to call the
displayed number with automatically adding “0” in
front of the phone number for some Toll free calls.
Note: Phone m st be in nlocked stat s if yo need to dial o t Toll
free calls.
3. Outgoing numbers menu
Check the Outgoing calls
On-hook status, press OUT/X button, press UP/- button
to review the outgoing call number.

If you hold the UP/- button for 3s to review quickly.
Press DEL button once if you need to delete the current
number.
Hold the DEL button for 3s if you need to delete the all
outgoing calls.
Call back an Outgoing call
When reviewing the outgoing calls if you need to
call back the displayed number press ARD button
once and the phone will dial to that number.
4. Pre-dial Number Menu
In On-hook state, press the telephone number that
you want to dial.
Press ARD button to dial out the pre-dial number.
5. Hold on Music
When you are talking, and you want put the caller
On Hold press HOLD button once and put back the
handset, the phone will send out the hold on music
to the caller.
Pick up the handset or press H.F button to stop the
holding music and talk to the caller again.
6. Calculator

You can use the calculator function in off-hook or on-hook
tate.
In On-hook or in the talking status, press CAL
button to enter the calculator function.
During the calculator mode, press CAL button once
to clear all data,
Press DEL button to exit the calculator mode.
The phone will auto exit the calculator mode if
there is an incoming call and the LCD will show the
new incoming call number.
•For example:92 X 86: On-hook or off hook stat s, press CAL
b tton to enter the calc lator stat s, inp t n mber 92, then press
OUT/X key. Inp t n mber 86, then press #/= key , LCD shows
n mber 7912.
7. V P Number
When you are checking the caller ID or outgoing
calls, press PAUSE/V P button to set the current
number to VIP number, and a lock symbol will
show in the LCD.
VIP number cannot be deleted when reviewing the
caller ID or outgoing calls, but holding the DEL

button for 3s can delete all caller ID or outgoing
calls including the VIP numbers.
When you review the VIP number, press the
PAUSE/V P button to make the VIP number in
unlock state, and the lock symbol will disappear
from the LCD.
8. Redial, Flash & Pause Functions
When you get a busy line, press FLASH to get a
new dial tone.
Press FLASH button to answer call waiting line.
(second call) press FLASH button again to get back to
the first line.
Press RED AL button to redial the last number, or
press another telephone number to make a new
call.
During the dialing, press PAUSE/V P button to
pause 3.6 second.
9. Select LCD contrast
In On-hook state, press BR GHT button repeatedly
to choose and select 5 LCD contrast settings.

10. Dial Lock
The unit provides Dial lock protection, the user can set the
lock to different settings according to the colour position
and functions as stated below.
Red: No calls can be dialed out.
Green:Telephone numbers starting with “0” cannot
be dialed out, it means you cannot make an IDD
call starting with “0”in this case.
Yellow: Allows to make any call (key pad unlocked).
11. Auto redial function
When dialing, if the line is busy, you could use this function
to auto-redial the number.
Lift the handset or press H.F. button and dial.
If the line is busy, you could press the RED AL
button directly without hanging up the handset or
press H.F button. Then the phone will auto-redial
the number repeatedly until the other party is
connected.
12. Advanced Setting menu
a) Tone / Pulse Dial setting

In On-hook state, press SET button once, SEt 1 dAtE
will show in the LCD.
press UP/- button four times , SEt 5 P- t will show in the
LCD.
Press set button again and tONE will show in the
display.
Press UP/- or DOWN/+ to choose TONE or PULSE.
Press SET button to confirm. LCD will show the next
available menu.
Press DEL button to exit.
b) Set Anti-parallel Dial protection
If this function is set all parallel phones connected with
the same telephone line will not be able to dial out.
This unit will send a dial signal when the parallel phone
is lifted to prevent it from dialing out.
In On-hook state, press SET button once, SEt 1 dAtE
will show in the LCD.
press UP/- button five times, SEt 6 ALAr will show in
the LCD.
Press SET button again and ALAr OFF will show in the

display.
Press UP/- or DOWN/+ to choose ALAr OFF or ALAr
ON.
Press SET button to confirm.LCD will show the next
available menu.
Press DEL button to exit.
FREQUENTLY ASKED QUEST ONS
1. NO TONE
Please check all the lines connections, and ensure all the
connections are proper.
2. CAN NOT MAKE/D AL A CALL
Please check the lock position and ensure Keys are unlocked.
3. NO SE
Please check if the line cord or wall plug is moistured.
4. ONLY G V NG ONE R NG WH LE ST LL CAN MAKE A
CALL
Please check the line connection, check if too many phones are
connected in the same line, or the wall socket or Tel Line cord is
moistured.
5. CANNOT D SPLAY CALLER D
a. Be sure that you have applied this service from a Telecom
service provider

b. Check if the battery has not drained and it has power.
c.Check if an apparatus is connected between unit and
Telephone line. (Example micro filters used in an AD L line)
If the unit still does not work properly, disconnect all the
telephone cords, remove the batteries, after 5 minutes, reload
batteries, insert the telephone line. The unit will get a reset.
tart using the unit.
Note: Due to continuous product development All features and
specifications are subject to change without prior notice
For more Information on Warranty and Product Support in Singapore please call
(65) 68412668 or Fa to (65) 68412628.
Email: [email protected]
Website: www.alcomonline.com