Alemite 8586 User manual

Service Guide
SER 8586
8586
8586-A
Alemite Corporation
167 Roweland Drive, Johnson City, Tennessee 37601
www.alemite.com
Copyright © 2004 by Alemite Corporation
This document contains confidential information that is the property of Alemite Corporation
670853 and is not to be copied, used, or disclosed to others without express written permission. Revision (3-04)
Figure 1 Portable Evacuation Oil Drain
Model 8586-A Shown
Description
Portable drain models 8586 and 8586-A are designed to
safely capture the oil from engine crankcases, transmissions,
and differentials.
Each drain system consists of a:
• drain bowl and drum cover assembly
• dolly assembly
• 16-gallon drum (model 8586-A only)
Drain Bowl and Drum Cover
The drain bowl assembly includes a strainer that guards
against loose items entering the drum. The strainer’s center post
can be used to hold inverted filters and allow them to drain.
The drain bowl assembly mounts on a tube that can extend
up to 26 " (66 cm) from its fully seated position. See Figure 1.
The tube is held by an automatic latching mechanism. This
mechanism retains the drain bowl tube at the required height.
The cover for the drum contains a built-in float gauge that
indicates when the drum is full.
Dolly
The drum is secured to the dolly with three thumb screw
clamps. The dolly’s four-wheel design allows stable mobility.
Operation and Adjustment
Lift the tube or the bowl upward and release. The latching
mechanism automatically grips the tube and retains the position
of the assembly. Lift the latch upward slightly to allow the bowl
to descend to the required height. Once reached, release the
latch.
Adjustment
Loosen the wing nut on the latching mechanism to lessen the
friction on the tube. Tightening the wing nut causes the tube
assembly to descend at a slower rate.
Evacuation
The use of an evacuation system allows the drum to be
emptied without tipping. See Figure 3.
Portable Evacuation Oil Drain

SER 8586 Portable Evacuation Oil Drain
Revision (3-04) 2 Alemite Corporation
Figure 2 Portable Evacuation Oil Drain Models 8586 and 8586-A - Exploded View

Portable Evacuation Oil Drain SER 8586
Alemite Corporation 3 Revision (3-04)
Item
No. Part No. Description Qty Notes Numeric Order Part # (Item #)
1Screw, Machine, 1/4 " -20 x 1/2 " 314037 (27)
2338998 Plate Assembly, Pivot 114534 (29)
3172207-1 Lockwasher, 1/4 " 348018 (15)
477650 Nut, 1/4 " -20 377650 (4)
5Handle, Filter Drain 1170345 (1)
6Washer, 0.29 " ID 2170837 (24)
7Strainer 1171415 (9)
8339049 Bowl Assembly 1172207-1 (3)
9Nut, Elastic Stop, 1/4 " -20 117693 (11)
10 339095 Tube 1308736 (23)
11 Screw, 1/4 " -20 x 3/8 " 2311174 (6)
12 316315-5 Dolly Assembly 1See SER 316315-5 316315-5 (12)
13 338685 Screen 1338565 (18)
14 Extension, 3/4 " NPTF (m) x 24 " Long 1338685 (13)
15 48018 Screw, Thumb, 1/4 " -28 x 7/8 " 3338688 (14)
16 Float 1338995 (16)
17 339171 Cover Assembly (Includes Gasket) 1338998 (2)
18 338565 Coupling, Adapter 1338999 (7)
19 Stem 1339047 (22)
20 Knob (Polypropylene) 1339049 (8)
21 339093 Grip (Vinyl) 1339093 (21)
22 339047 Handle, Friction 2339095 (10)
23 308736 Spring 1339097 (5)
24 170837 Nut, Wing, 1/4 " -20 1339098 (19)
25 Nut, Elastic Stop, 10-24 1339099 (26)
26 339099 Latch 1339102 (28)
27 Bolt, Carriage, 1/4 " -20 x 2-1/2 " 1339103 (20)
28 339102 Screw, Shoulder, 10 -24 x 2-3/8 " 1339105 (25)
29 Washer, 5/16 " 1339171 (17)
30 340002 Drum 1Model 8586-A Only 340002 (30)
Legend:
Part numbers left blank (or in italics) are not available separately
designates a repair kit item
Repair Kit
Part No. Kit Symbol Description
393675 Kit, Filter Drain
Accessory
Part Number Description Notes
338554 Kit, Evacuation Hose See Figure 3
Table 2 Portable Evacuation Oil Drain Models 8586 and 8586-A Accessory

SER 8586 Portable Evacuation Oil Drain
Revision (3-04) 4 Alemite Corporation
Figure 3 Optional Evacuation Hose Kit 338554
Item No. Part No. Description Qty
1320353 Bushing, 1 " NPT x 3/4 " NPT 1
2317849-6 Hose, Suction, 3/4 " x 6 ' Long 1
3338564 Valve, Ball, 3/4 " NPT 1
4338563 Coupler, Camlock, 3/4 " 1
Troubleshooting Chart
Pump Indications Possible Problems Solution
Handles (22) fail to grip Tube (10) Handles (22) worn at holes and /or slots Turn Handles (22) upside down
Drain bowl assembly drops too rapidly 1. Wing Nut (24) loose
2. Spring (23) broken or missing 1. Tighten Wing Nut (24) 2. Replace Spring (23)
Unable to raise drain bowl assembly Excessive downward force placed on
Handles (22)Raise Handles (22)
Changes Since Last Printing
Added Model 8586-A