Allen + Roth EFC11-WS42 User manual

Questions, problems, missing parts?Before returning to your retailer, call our customer
service department at 1-866-439-9800, 8 a.m. - 8 p.m., EST, Monday - Friday.
ITEM #0181440
WALL SHELF
French p. 8
MODEL #EFC11-WS42
ATTACH YOUR RECEIPT HERE
Serial Number Purchase Date
1
Español p.15
allen + roth® is a registered trademark
of LF, LLC. All Rights Reserved.

PACKAGE CONTENTS
2
PART DESCRIPTION QUANTITY
A Top 1
B Left Side Panel
Right Side Panel
1
C 1
D Shelf 1
E
Back Crossbar
Back Panel
PART DESCRIPTION QUANTITY
F
Middle Panel
1
1
2
G
A
B
C
D
E
E
F
G

HARDWARE CONTENTS (shown actual size)
3
AA
Wood
Screw
Qty. 12
BB CC DD GGFF
Small
Screw
Qty. 6 Medium
Screw
Qty. 4
Allen
Wrench
Long
Screw
Qty. 3
Wall
Anchor
Qty. 3
Qty. 1
Hook
Qty. 3
EE
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or
install the product.
• Assemble the parts on a soft, non-abrasive surface, such as carpeting, to avoid
scratching the finish.
• This unit can hold up to 20 lbs. per shelf. Distribute weight evenly.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents. If any part is missing or damaged, do not
attempt to assemble the product.
Estimated Assembly Time: 60 minutes
Tools Required for Assembly (included): Allen Wrench
Tools Required for Assembly (not included): Phillips Screwdriver, 1/4 in. Masonry Drill Bit,
Marking Pencil, Level, Hammer, Drill

1. Attach left side panel (B) and right side
panel (C) to shelf (D).
2. Attach back crossbar (F) to left side
panel (B) and right side panel (C)
using four medium screws (CC). Do
not overtighten medium screws (CC)
to avoid cracking the wood.
3. Insert back panel (G) into groove of left
side panel (B) and right side panel (C).
4
1
ASSEMBLY INSTRUCTIONS
D
D
G
B
F
C
2
3
Hardware Used
CC Medium Screw x 4
CC
CC
C
C
B
B

4. Attach middle panel (E) to shelf (D).
Secure with four wood screws (AA) and
tighten with the Allen wrench (FF).
Do not overtighten wood screws (AA)
to avoid cracking the wood.
5. Attach top (A) to assembled unit using
eight wood screws (AA) and tighten
with the Allen wrench (FF).
Do not
overtighten wood screws (AA) to avoid
cracking the wood.
6. Attach three hooks (GG) to back crossbar
(F) using six small screws (BB).
5
ASSEMBLY INSTRUCTIONS
Hardware Used
FF x 1
Allen Wrench
AA Wood Screw x 8
Hardware Used
FF x 1
Allen Wrench
AA Wood Screw x 4
Hardware Used
GG x 3
Hook
BB Small Screw x 6
5
6
4
AA
AA
AA
AA FF
GG
D
B
B
A
E
E
E
E
F
C
GG GG
BB BB BB
C
AA
AA
AA
AA
FF
D

1. Hold the assembled unit against the
wall at the desired height. Mark the
keyhole positions with a marking pencil
(not included), making sure it is level.
Using a1/4 in. masonry bit (not included),
drill three holes into the pre-marked
keyhole positions.
2.
3.
6
HANGING INSTRUCTIONS
Hardware Used
EE Wall Anchor x 3
2
3
1
Hardware Used
DD Long Screw x 3
Anchor the wall using the wall anchors
(EE).
Install a long screw (DD) for each
keyhole plate. Leave the head exposed
at least 1/10 in. Hang the unit from the
wall by pushing the keyhole plate over
the pinhead long screws (DD) and push
the unit down to lock it in place.

7
CARE AND MAINTENANCE
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 1-866-439-9800,
8 a.m. - 8 p.m., EST, Monday - Friday.
Printed in Thailand
• Periodically check to make certain all components are properly positioned, free from damage
and firmly connected.
• Wipe clean using a damp cloth and a mild cleaner. Wipe dry with a clean cloth.
0181440-A
0181440-B
0181440-C
0181440-D
0181440-E
0181440-F
PART DESCRIPTION
A Top
B Left Side Panel
C Right Side Panel
D Shelf
E Middle Panel
FBack Cross Bar
0181440-G
GBack Panel
0181440-AA
AA Wood Screw
0181440-BB
BB
0181440-CC
0181440-DD
CC Medium Screw
Small Screw
DD Pinhead Long Screw
0181440-EE
EE Wall Anchor
0181440-FF
FF Allen Wrench
0181440-GG
GG Hook
PART #
AA BB CC DD GGFF
EE
A
B
C
D
E
E
F
G