Allen + Roth L-GZ401PCO-C1 User manual

HARDTOP GAZEBO
ITEM #0732511
MODEL #
L-GZ401PCO-C1
Serial Number Purchase Date
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-866-439-9800, 8 a.m. - 8 p.m., EST, Monday - Friday.
EB 16298
ATTACH YOUR RECEIPT HERE
Français p. 28
1
TM
allenandroth.com

2
PACKAGE CONTENTS
G5
C5
E5
I5
F5
D5
A5
B5
H5
C3
D3
J3
I3
H3
G3
B3
A3
B2
G1
F2
E4
D2
A2
C1
D4
C4
I4
A1
F1
D1
H4
J5
A4
B4
F3 E3
G2 E2 K2 J2
C2 I2
H2 H1
I1
E1
F4
B1
G4
allenandroth.com

3
PACKAGE CONTENTS
PART
A1
B1
C1
D1
E1
F1
Long Decorative Gutter
Short Decorative Gutter
Corner Decorative Gutter 1
Corner Decorative Gutter 2
Middle Beam Connector
Decorative Gutter Connector
Corner Connector
Long Mosquito Netting Tube
DESCRIPTION QUANTITY
G1
H1
2
2
2
2
4
4
4
8
4
1
4
4
2
2
2
2
2
2
2
2
2
1
2
2
4
2
Short Mosquito Netting Tube
I1
A2
Top Slanting Bar
Right Long Support Beam of Big Top Long Side
Left Short Support Beam of Big Top Long Side
Right Short Support Beam of Big Top Long Side
Left Long Support Beam of Big Top Short Side
Right Long Support Beam of Big Top Short Side
Left Short Support Beam of Big Top Short Side
Right Short Support Beam of Big Top Short Side
Small Top Bottom Beam 1
Small Top Sheeting
Roof Cover of Small Top Long Side
Roof Cover of Small Top Short Side
Small Top Bottom Connecting Frame
E2
F2
G2
H2
I2
J2
K2
A3
B3
C3
E3
D3
1
1
1
1
Small Top Bottom Beam 2
Small Top Connector
Small Top Cover
Top Decor
Chandelier Hook
F3
G3
H3
I3
J3
4
4
4
Post Base
Base Cover
Post
A4
B4
C4
Big Top Frame
B2
C2 Middle Beam
D2 Left Long Support Beam of Big Top Long Side
allenandroth.com

4
PACKAGE CONTENTS
4
2
2
2
2
2
2
4
4
4
4
2
4
18
1
Block Plate
Top Block
Short Right Arc Support
Short Left Arc Support
Long Right Arc Support
Long Left Arc Support
Left Long Big Top Cover
Right Long Big Top Cover
Left Middle Big Top Cover
Right Middle Big Top Cover
Left Small Big Top Cover
Right Small Big Top Cover
Short Big Top Cover
Top Cover
Roof Press Sheet
Mosquito Netting
D4
E4
F4
G4
H4
I4
A5
B5
C5
D5
F5
E5
G5
H5
J5
I5
4
PART DESCRIPTION QUANTITY
HARDWARE CONTENTS (not shown to size)
M6
Flat Washer
Qty. 308 + 15 spare Qty. 88 + 10 spare Qty. 124 + 8 spare
AA CC DDBB
M6 x 15 mm
Short Bolt
M6 x 15 mm
Short Screw
Plastic Cap
Qty. 16
allenandroth.com

SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble or
install the product.

be supervised while gazebo is being assembled.

such as fence, garage, house, overhanging branches, laundry lines or electrical
wires.
!!
assembly.
!"$%
are recommended for safe assembly.
WARNING
5
HARDWARE CONTENTS
￠8 X 80 mm
Anchor
M6
Wrench
Hook
Qty. 52 + 8 spare
Qty. 16
II KK LLJJ
M6
Hooded Nut
Qty. 4 + 1 spare Qty. 2
M6 Nut
Qty. 16 + 1 spare
EE GG HHFF
M6 x 55 mm
Long Screw
M6 x 40 mm
Middle Screw
￠8 X 260 mm
Stake
Qty. 16 + 1 spare Qty. 8 + 1 spare Qty. 16
M6 x 20 mm
Long Bolt
MM
Qty. 68 + 2 spare
allenandroth.com

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is missing
or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 150 minutes
Tools Required for Assembly (included): Wrench.
Tools Required for Assembly (not included): Phillips screwdriver, hammer, and 2
ladders (no less than 8.2-feet tall).
SAFETY INFORMATION
&'$
again.

ground stakes, in areas subject to frequent severe weather, securing the gazebo
to a deck, concrete patio or footings should be considered.
*
*%
conditions:
1. Visible movement of support members, roofing panels or sagging roofline.
2. Creaks or audible noise from the gazebo.
3. Cracks, fractures or malformation of support member or roof panels.
4. Damaged or missing fasteners.
WARNING
6
/!&!
the ground. Do not assemble the gazebo on sandy, muddy or loose soil, as stakes
do not have enough anchorage in these types of soil. If you wish to secure the
gazebo to a wood deck or concrete surface, use anchors suited to these surfaces.
;!
when it is thicker than 4 inches. In order to avoid damages, use a plastic snow
rake to remove excessive snow and ice buildup from roof and keep away from
falling debris.
<
=&>
may require permits for installation and use. Some special procedures may be
valid in your area.
"
&%?@@
CAUTION
allenandroth.com

7
ASSEMBLY INSTRUCTIONS
D1
G1
G1
I1 G1
E1 E1
E1E1
D1
A1
A1
B1
B1
Fig.2
Fig.1 Fig.3
Fig.4
Fig.5 Fig.6
C1
H1
H1
I1
1.Connect decorative gutter connectors (F1)
and corner decorative gutters 1 (C1) using
short bolts (CC) and flat washers (BB).
Repeat this step for decorative gutter
connectors (F1) and corner decorative
gutters 2 (D1). Tighten with wrench (LL).
2. Insert long decorative gutters (A1) into
corner decorative gutters 1 (C1) and corner
decorative gutters 2 (D1) using short bolts
(CC) and flat washers (BB). Tighten with
wrench (LL).
Note: Ensure to insert A1 into the end labeled
for such on parts C1 and D1.
Hardware Used
BB
M6 x 15 mm Short Bolt
CC
M6 Flat Washer x 16
x 16
M6 Wrench
LL x 1
Hardware Used
BB
M6 x 15 mm Short Bolt
CC
M6 Flat Washer x 8
x 8
M6 Wrench
LL x 1
allenandroth.com
1
CC CC
BB
BB
C1
C1
F1
F1
A1
CC
2
BB
C1
A1
A1 C1
F1
A1
D1

8
ASSEMBLY INSTRUCTIONS


Hardware Used
BB
M6 x 15 mm Short Bolt
CC
M6 Flat Washer x 8
x 8
M6 Wrench
LL x 1
5. Attach corner connectors (G1) to corner
decorative gutters 1 (C1) and corner
decorative gutters 2 (D1) using short bolts
(CC) and flat washers (BB). Tighten with
wrench (LL).
11
5
C1
allenandroth.com
4. Attach middle beam connectors (E1) to
long decorative gutters (A1) and short
decorative gutters (B1) using short bolts
(CC) and flat washers (BB). Tighten with
wrench (LL).
rdware Used
BB
M6 x 15 mm Short Bolt
CC
M6 Wrench
LL
M6 Flat Washer x 8
x 8
x 1
4
A1
E1
BB
BB
CC
CC
CC
3. Insert short decorative gutters (B1) into
corner decorative gutters 1 (C1) and
corner decorative gutters 2 (D1) using
short bolts (CC) and flat washers (BB).
Tighten with wrench (LL).
Note: Ensure to insert B1 into the end
labeled for such on parts C1 and D1.
Hardware Used
BB
M6 x 15 mm Short Bolt
CC
M6 Flat Washer x 8
x 8
M6 Wrench
LL x 1
BB
BB
G1
CC
3
B1
CC CC
BB BB
C1
C1
F1 B1
B1

9
ASSEMBLY INSTRUCTIONS
Plastic Cap
x 16
Hardware Used
BB M6 Flat Washer
M6 Wrench
LL x 1
x 16
M6 x 15 mm Short Bolt
CC
Hardware Used
Hook
JJ
AA
x 52
x 16
6. Attach plastic caps (AA) to one end of
each netting tube, then insert 7 hooks
(JJ) into the inside rail of long mosquito
netting tube (H1) as shown and 6 hooks
(JJ) into the inside rail of short mosquito
netting tubes (I1).
Then, attach plastic caps (AA) to the other
ends of each of the netting tubes.
7. Attach long mosquito netting tubes (H1) to
long decorative gutters (A1) and corner
decorative gutters 1 (C1) using short bolts
(CC) and flat washers (BB). Repeat this
step for attaching short mosquito netting
tubes (I1) to short decorative gutters (B1)
and corner decorative gutters 2 (D1).
Tighten with wrench (LL).
11
6H1
H1
AA
JJ
JJ
C1
11
7
CC
CC
BB
BB
A1
H1
allenandroth.com
H1
AA

10
ASSEMBLY INSTRUCTIONS
Fig.13
Fig.12
Fig.9
Fig.11
Fig.8 Fig.10
B2
C2 C2
D2
J2 K2
A2
H2
I2
E2
F2
G2
12-1
9
9. Attach the top ends of top slanting bars
(A2) to the big top frame (B2) using short
bolts (CC) and flat washers (BB). Tighten
with wrench (LL).
Hardware Used
BB
M6 x 15 mm Short Bolt
CC
M6 Wrench
LL
M6 Flat Washer x 8
x 8
x 1
B2
A2
BB
CC
CC
BB
allenandroth.com
12-1
8
8. Attach the lower ends of top slanting bars
(A2) to the corner connectors (G1) using
long screws (EE), flat washers (BB) and
nuts (FF). Tighten with screwdriver (not
included). G1
Hardware Used
BB
M6 x 55 mm
Long Screw
EE
M6 Nut
FF
M6 Flat Washer x 8
x 8
x 8
A2
BB
FF
EE