Alliance Laundry Systems DRY725C User manual

User's Guide
for Dryers
DRY725C_SVG
Original Instructions
Keep These Instructions for Future Reference.
(If this machine changes ownership, this manual must accompany machine.)
ca.alliancelaundry.com Part No. 516318EN
October 2016

Front Matter
WARNING
WARNING
FOR YOUR SAFETY, the information in this manual
must be followed to minimize the risk of fire or explo-
sion or to prevent property damage, personal injury or
death.
W033
WARNING
• Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any oth-
er appliance.
• WHAT TO DO IF YOU SMELL GAS:
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use
any phone in your building.
• Clear the room, building or area of all occu-
pants.
• Immediately call your gas supplier from a
neighbor’s phone. Follow the gas supplier’s in-
structions.
• If you cannot reach your gas supplier, call the
fire department.
• Installation and service must be performed by a
qualified installer, service agency or the gas suppli-
er.
W052
Front Matter
©Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
3 Part No. 516318EN

Product Registration
New owners of Alliance Laundry Systems equipment are encour-
aged to register their appliance to insure proper limited warranty
coverage. Register online at ca.speedqueen.com/warranty or con-
tact your dealer to register your appliance. All information will be
kept confidential and will not be distributed to other parties.
Product Registration
©Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
4 Part No. 516318EN

Table of Contents
Product Registration..........................................................................4
Safety Information............................................................................. 6
Explanation of Safety Messages................................................................. 6
Important Safety Instructions....................................................................6
Before Drying.................................................................................... 8
Energy Saving Tips....................................................................................8
Helps and Hints....................................................................................... 8
Sort......................................................................................................8
Load......................................................................................................8
Operating Your Dryer........................................................................ 10
Available Drying Cycles............................................................................ 10
Automatic Regular/Delicate Cycle...........................................................10
Time Dry Cycle....................................................................................10
Automatic Wrinkle Out Cycle................................................................. 10
Automatic Permanent Press/Knits Cycle..................................................10
To Dry Clothes.......................................................................................10
End of Cycle Signal................................................................................. 11
Optional Drying Rack...............................................................................12
Maintenance................................................................................... 13
Lubrication........................................................................................... 13
Care of Your Dryer.................................................................................. 13
Exhaust System.................................................................................13
Motor Overload Protector........................................................................13
Lint Filter............................................................................................. 13
Optional Control Knob Inserts................................................................... 13
Troubleshooting............................................................................... 15
Contact Information............................................................................... 16
©Copyright 2016, Alliance Laundry Systems LLC
All rights reserved. No part of the contents of this book may be reproduced or transmied in any form or by any means without the expressed wrien
consent of the publisher.
©Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
5 Part No. 516318EN

Safety Information
Explanation of Safety Messages
Precautionary statements (“DANGER,” “WARNING,” and “CAU-
TION”), followed by specific instructions, are found in this manual
and on machine decals. These precautions are intended for the per-
sonal safety of the operator, user, servicer, and those maintaining
the machine.
DANGER
Indicates an imminently hazardous situation that, if
not avoided, will cause severe personal injury or
death.
WARNING
Indicates a hazardous situation that, if not avoided,
could cause severe personal injury or death.
CAUTION
Indicates a hazardous situation that, if not avoided,
may cause minor or moderate personal injury or prop-
erty damage.
Additional precautionary statements (“IMPORTANT” and “NOTE”)
are followed by specific instructions.
IMPORTANT: The word “IMPORTANT” is used to inform
the reader of specific procedures where minor machine
damage will occur if the procedure is not followed.
NOTE: The word “NOTE” is used to communicate in-
stallation, operation, maintenance or servicing informa-
tion that is important but not hazard related.
Important Safety Instructions
Save These Instructions
WARNING
To reduce the risk of fire, electric shock, serious injury
or death to persons when using your dryer, follow
these basic precautions:
W130
• Read all instructions before using the dryer.
• Refer to the GROUNDING INSTRUCTIONS in the INSTALLATION
manual for the proper grounding of the dryer.
• Do not dry articles that have been previously cleaned in, soaked
in, washed in, or spoed with gasoline, dry-cleaning solvents,
other flammable or explosive substances as they give off vapors
that could ignite or explode. Highly flammable substances com-
monly used in domestic environments including acetone, dena-
tured alcohol, petrol/gasoline, kerosene, spot removers (some
brands), turpentine, waxes and wax removers. This appliance
shall not be used to dry off solvents or dry-cleaning fluids.
• Do not allow children to play on or in the unit. This appliance is
not intended for use by young children or infirm persons without
supervision. Young children should be supervised to ensure that
they do not play with the appliance.
• Before the dryer is removed from service or discarded, remove
the door to the drying compartment.
• Do not reach into the dryer if the cylinder is revolving.
• Do not install or store the dryer where it will be exposed to wa-
ter and/or weather.
• Do not tamper with the controls.
• Do not repair or replace any part of the dryer, or aempt any
servicing unless specifically recommended in the user-mainte-
nance instructions or in published user-repair instructions that
you understand and have the skills to carry out.
• Do not use fabric softeners or products to eliminate static un-
less recommended by the manufacturer of the fabric softener
product.
• To reduce the risk of fire, DO NOT DRY plastics or articles con-
taining foam rubber (also known as latex foam) or similarly tex-
tured rubberlike materials. Foam rubber materials can, when
heated, produce fire by spontaneous combustion.
• Always clean the filter after every load. A layer of lint in the fil-
ter reduces drying efficiency and prolongs drying time.
• Keep area around the exhaust opening and adjacent surround-
ing area free from the accumulation of lint, dust and dirt.
• The interior of the dryer and the exhaust duct should be
cleaned periodically by qualified service personnel.
Safety Information
©Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
6 Part No. 516318EN

• This gas appliance contains or produces a chemical or chemicals
which can cause death or serious illness and which are known to
the State of California to cause cancer, birth defects, or other
reproductive harm. To reduce the risk from substances int he
fuel or from fuel combustion, make sure this appliance is instal-
led, operated, and maintained according to the manufacturer's
instructions.
• Dryer will not operate with the loading door open. DO NOT by-
pass the door safety switch by permiing the dryer to operate
with the door open. The dryer will stop tumbling when the door is
opened. Do not use the dryer if it does not stop tumbling when
the door is opened. Do not use the dryer if it does not stop
tumbling when the door is opened or starts tumbling without
pressing or turning the START mechanism. Remove the dryer
from use and call the service person.
• Do not put articles soiled with vegetable or cooking oil in the
dryer, as these oils may not be removed during washing. Due to
the remaining oil, the fabric may catch on fire by itself.
• To reduce the risk of fire, DO NOT put clothes which have traces
of any flammable substances such as machine oil, flammable
chemicals, thinner, etc. or anything containing wax or chemicals
such as in mops and cleaning cloths, or anything dry-cleaned at
home with dry-cleaning solvent in the dryer.
• Use the dryer only for its intended purpose, drying clothes.
• Always disconnect the electrical power to the dryer before at-
tempting service. Disconnect the power cord by grasping the
plug, not the cord.
• If supply cord is damaged, it must be replaced by a special cord
or assembly available from the manufacturer or its service
agent.
• Install this dryer according to the INSTALLATION INSTRUC-
TIONS. All connections for electrical power, earthing and gas
supply must comply with local codes and be made by licensed
personnel when required. Do not do it yourself unless you know
how!
• Remove laundry immediately after the dryer stops.
• Always read and follow manufacturer's instructions on pack-
ages of laundry and cleaning aids. Heed all warnings or precau-
tions. To reduce the risk of poisoning or chemical burns, keep
them out of reach of children at all times (preferably in a locked
cabinet).
• Do not tumble fiberglass curtains and draperies unless the label
says it can be done. If they are dried, wipe out the cylinder with
a damp cloth to remove particles of fiberglass.
• ALWAYS follow the fabric care instructions supplied by the gar-
ment manufacturer.
• Never operate the dryer with any guards and/or panels re-
moved.
• DO NOT operate the dryer with missing or broken parts.
• DO NOT bypass any safety devices.
• Failure to install, maintain, and/or operate this machine accord-
ing to the manufacturer's instructions may result in conditions
which can produce bodily injury and/or property damage.
NOTE: The WARNING and IMPORTANT SAFETY IN-
STRUCTIONS appearing in this manual are not meant to
cover all possible conditions and situations that may oc-
cur. Common sense, caution and care must be exercised
when installing, maintaining, or operating the washer.
Always contact your dealer, distributor, service agent or the manu-
facturer about any problems or conditions you do not understand.
Safety Information
©Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
7 Part No. 516318EN

Before Drying
Energy Saving Tips
• Make sure the lint filter is always clean.
• Do not overload the dryer.
• Do not overdry items.
• Remove items to be ironed while still damp.
• Large loads of similar fabrics dry the most efficiently. However,
dry permanent press in smaller loads to prevent wrinkling.
• Use the correct cycle for the type of fabric being dried.
• Locate your dryer so the exhaust duct is as short and straight
as possible.
• Do not open the door during the drying cycle.
• Plan to do your laundry on low humidity days; your clothes will
dry faster.
• Dry multiple loads of clothes one right after another so dryer
interior does not have to be reheated for each load.
Helps and Hints
• The directions for installation and proper exhausting are given in
the Installation Instructions which are included with the dryer.
• Static electricity may cause garments of synthetic fibers (as
in lingerie) to cling together, especially if they are overdried. The
use of a liquid fabric softener in the rinse water of the washer,
or a fabric softener sheet in the dryer, will soften clothes and
reduce static electricity.
• Do not wash or dry clothes that shed lint in the same load with
permanent press or knit garments.
• Remove permanent press loads immediately after dryer stops.
• Follow the care labels on FLAME RETARDANT, SCOTCH-
GUARD™, etc., garments for proper washing and drying.
• If loads should be damp for ironing, turn timer knob to the EN-
ERGY SAVER seing, marked with an asterisk (*), in AUTOMAT-
IC or TIME DRY cycles.
Sort
If you have correctly sorted the items for washing, they should be
properly sorted for drying too.
1. Sort by color.
2. Separate lint shedding fabrics and lint receiving fabrics. Towels,
flannels, chenille, coons, rugs, etc., shed lint. Corduroys, knits
(including socks), permanent press, and synthetics aract lint.
3. Separate no heat, low heat and high heat items.
In any kind of drying, lightweight fabrics will dry faster than heavy-
weight fabrics. If mixed loads are dried together (such as sheets
and towels), remove the lighter weight fabrics when they are dry to
prevent overdrying and wrinkling. The best method is to dry clothes
which require the same time, temperature or dryness level in the
same load.
TLW1991N_SVG
Load
WARNING
Do not wash or dry items soiled with vegetable or
cooking oils. Some oils may remain after washing and
may cause the fabric to catch on fire by itself.
W527
• Do not overload your dryer. Bulk, not weight, determines the
load size. If the dryer is overloaded, it could cause discoloration
or permanent heat damage to the load.
• There should be space in the dryer for the clothes to tumble
freely and help to reduce wrinkles.
• Large and small pieces together make up loads which will tumble
well. Permanent press loads should be smaller to provide room
for tumbling. Proper tumbling allows for fewer wrinkles.
• A load can be too small. Just a few small pieces will not tumble
properly. They will take longer to dry and they may be wrinkled.
For small loads, add a couple of large towels or non lint shedding
items to aid in tumbling.
• The following illustrations show the ideal load sizes for fabrics.
The average load will fill the cylinder one third to half full when
wet.
Cylinder with wet linens and cottons
DRY2031N_SVG
Before Drying
©Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
8 Part No. 516318EN

Cylinder with wet permanent press items
DRY2032N_SVG
Before Drying
©Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
9 Part No. 516318EN

Operating Your Dryer
WARNING
To reduce the risk of fire, electric shock, serious injury
or death to persons, read the Safety Information sec-
tion before operating the dryer.
W520
Available Drying Cycles
NOTE: Use the automatic cycles for drying items that
can be dried wih heat. These cycles automatically dry
loads to the dryness level selected.
MAX DRY and MORE DRY will dry very small loads and some heavy
items, such as blue jeans, but will overdry lightweight items, such as
sheets and shirts. Overdrying can cause wrinkling, shrinking, exces-
sive lint conditions, and will use more energy than necessary.
LESS DRY, which uses the least energy, will dry large loads and
lightweight items, such as sheets and shirts, but might leave other
items, such as denim and heavy bath towels, more damp.
To increase energy savings and to make sure loads are dried with-
out overdrying, set your loads on LESS DRY. If items are damp at
the end of a cycle, the timer knob needs to be set closer to the
MORE DRY seing the next time these loads are dried. If items are
overdry at the end of a cycle, the timer knob should be set closer to
COOL DOWN or COOL TUMBLE when these loads are dried again.
Remember the seings that work best to get ideal drying results.
The COOL DOWN and COOL TUMBLE period at the end of each cycle
provides items a chance to tumble with no heat and cool down to
room temperature. This prevents wrinkles from seing if items can-
not be cared for immediately.
NOTE: The timer knob will not advance as quickly in the
AUTOMATIC cycles as it does in the TIME DRY cycle.
The time it takes for the timer to advance depends on
the type and size of the load being dried.
The ENERGY SAVER seings, marked with an asterisk (*), show
which seings will use the least energy and will leave items damp
for easier ironing.
Automatic Regular/Delicate Cycle
Use for sturdy items like play or work clothes and also for delicate
items. The type of heat is determined by choosing the proper Fabric
Selector option. There are three seings in the AUTOMATIC REGU-
LAR/DELICATE cycle - MAX DRY, MORE DRY, and LESS DRY.
Time Dry Cycle
This cycle will operate dryer for up to 75 minutes. Coons and
heavyweight items dry best between 50 and 75 minutes, and light-
weight items dry best between 20 and 40 minutes.
Automatic Wrinkle Out Cycle
Available on Select Models Only
Use this for items that are slightly wrinkled after siing in a dryer
or laundry basket overnight. The cycle has a short heat seing fol-
lowed by a five minute COOL DOWN.
Automatic Permanent Press/Knits Cycle
Use for permanent press items and synthetics. The type of heat is
determined by selecting the proper Fabric Selector option. There
are two seings in the AUTOMATIC PERMANENT PRESS/KNITS
cycle - MAX DRY or MORE DRY (seings vary by model) and LESS
DRY.
To Dry Clothes
IMPORTANT: Refer to the INSTALLATION INSTRUC-
TIONS before using dryer.
IMPORTANT: Before using dryer for the first time, use an
all-purpose cleaner or a detergent and water solution
and a damp cloth to remove shipping dust from inside of
dryer drum.
1. Sort items into separate loads.
TLW1991N_SVG
NOTE: Remove all sharp objects from laundry to
avoid tears and rips to items during normal machine
operation.
2. Remove lint filter cover, clean lint filter and replace cover.
Operating Your Dryer
©Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
10 Part No. 516318EN

DRY2025N_SVG
WARNING
To reduce the risk of fire and risk of lint collecting
in exhaust duct, do not operate dryer without lint
filter in place.
W771
3. Add clothes loosely into dryer drum. Add fabric softener sheet,
if desired.
NOTE: To avoid damage to dryer, do not use more
than one fabric softener sheet per load.
DRY2032N_SVG
4. Close loading door. Dryer will not operate with the door open.
DRY2026N_SVG
5. Select Fabric Selector (available seings vary by model). Follow
garment manufacturer's care labels for recommended tempera-
ture seings.
DRY2349N_SVG
6. Select optional EXTEND TUMBLE (available on select models)
seing to continue tumbling items at no heat. This prevents
wrinkling when garments cannot be removed from the dryer im-
mediately. By pressing the EXTEND TUMBLE buon to ON, the
AUTOMATIC REGULAR/DELICATE and AUTOMATIC PERMA-
NENT PRESS/KNITS cycles will tumble an additional 40 mi-
nutes.
DRY2029N_SVG
7. Select timer seing in cycle desired. These cycles control the
drying time.
The ENERGY SAVER seings, marked with an asterisk (*), show
which dryer seings will use the least energy and will leave
items damp for easier ironing.
8. Push timer knob in to start dryer.
NOTE: To stop dryer at any time, open the door or
turn timer knob to an OFF position. To restart dryer,
close door, reset timer if necessary, and push in the
timer knob.
End of Cycle Signal
The volume of the signal tone may be set on OFF, LOUD or between
the two selections. If a volume level is selected, the signal will let
you know when the cycle is done. The signal will stop when the door
is opened, or when the timer is advanced to an OFF position.
DRY2331N_SVG
NOTE: The signal will come on every 10 minutes when
the optional EXTEND TUMBLE setting is selected.
Operating Your Dryer
©Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
11 Part No. 516318EN

Optional Drying Rack
A drying rack, Part No. 512082, is available at extra cost through
your Factory Authorized Service Center.
The drying rack can be used in manual cycles only for no-tumble dry-
ing of articles such as tennis shoes, sweaters, stuffed toys or oth-
er delicate items.
DRY2332N_SVGDRY2332N_SVG
Operating Your Dryer
©Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
12 Part No. 516318EN

Maintenance
Lubrication
All moving parts are sealed in a permanent supply of lubricant or
are equipped with oilless bearings. Additional lubrication will not be
necessary.
Care of Your Dryer
WARNING
To reduce the risk of an electric shock, serious injury
or death, disconnect the electrical service to the dryer
before cleaning the interior.
W132
Dryer Interior
Wipe the surfaces using a soft cloth and household cleaner or a
non-abrasive paste of powdered laundry detergent and hot water,
followed by a short heat cycle with a load of rags.
To remove crayon or ball point ink off the dryer drum, put the heat
on high and use old rags in the dryer to absorb the crayon or ink. If
unsuccessful, contact the appliance dealer. DO NOT use any chemi-
cals in the dryer.
IMPORTANT: The use of chlorine bleach for removing
any discolorations should be avoided because bleach
could damage the finish.
Cabinet
Wipe the dryer cabinet as needed. If detergent, bleach or other
washing products have been spilled on the dryer, wipe immediately.
Some products will cause permanent damage if spilled on the cabi-
net.
Control Panel
Use only a damp or sudsy cloth for cleaning the control panel. Some
spray pretreat products may harm the finish on the control panel.
DO NOT use products that contain alcohol on the control panel.
Exhaust System
WARNING
To reduce the risk of electric shock, disconnect the
electrical service to the dryer before cleaning.
W043
The exhaust duct should be inspected after one year of use and
cleaned if necessary by a qualified service person to remove any lint
build-up. Inspect and clean exhaust duct every one to two years as
required thereafter.
NOTE: This recommended maintenance is not covered
under the terms of the warranty.
The weather hood should be checked frequently to make sure the
dampers move freely, dampers are not pushed in and that nothing
has been set against them.
Keep dryer area clear and free from combustible materials, gasoline
and other flammable vapors and liquids.
Do not obstruct the flow of combustion and ventilation air.
NOTE: Verify proper operation after servicing.
Motor Overload Protector
The dryer’s motor overload protector stops the motor automati-
cally in the event of an overload. After cooling, the overload protec-
tor will reset itself. Dryer can be restarted by pushing the timer
knob in. If overload protector cycles again, remove the dryer from
use and call the service person to correct the problem.
Lint Filter
The lint filter is located at the front of the dryer in the lower part of
the door opening.
CLEAN THE LINT FILTER BEFORE DRYING EACH LOAD. Remove lint
filter cover, clean lint filter and replace cover. Annually remove lint
filter and screw to vacuum the duct under it.
DRY2025N_SVG
Optional Control Knob Inserts
Your unit has come equipped from the factory with a gray back-
ground on the control panel knobs. If you wish to change the color,
additional color inserts are available at additional cost through
your dealer.
Maintenance
©Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
13 Part No. 516318EN

Maintenance
©Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
14 Part No. 516318EN

Troubleshooting
Try these troubleshooting tips before making a service call. They
may save you time and money.
Dryer Symptom Possible Cause/Solution
Dryer won’t start • For dryers equipped with a power cord, make sure the power
cord is plugged all the way into the electrical outlet.
• Make sure loading door is closed.
• Push timer knob in to start dryer.
• Make sure the laundry room fuse(s) isn’t blown or loose, or cir-
cuit breakers aren’t open.
• The dryer itself does not have an electrical fuse. An electric
dryer has an electrical circuit with two fuses.
• Check if motor overload protector has cycled. Wait 10 minutes
and try again.
Dryer won’t heat • Make sure timer is not in COOL DOWN, COOL TUMBLE or EX-
TENDED TUMBLE seings or that Fabric Selector is not set at
NO HEAT.
• Electric dryers only – Some homes may have two fuses or cir-
cuit breakers for an electric dryer; both fuses or circuit break-
ers should be checked. Make sure the laundry room fuse(s) isn’t
blown or loose, or that the circuit breakers aren’t open.
• The dryer itself does not have an electrical fuse. An electric
dryer has an electrical circuit with two fuses.
• Gas dryer only – Make sure equipment and main gas line valve is
turned on.
• Check exhaust duct to outside to see if it is kinked, blocked or
needs cleaning.
• Check weather hood to make sure flapper moves freely, has not
been pushed in or has not been blocked.
Dryer doesn’t dry clothes satisfactorily • Check exhaust duct to outside to see if it is kinked, blocked or
needs cleaning.
• Check weather hood to make sure flapper moves freely, has not
been pushed in or has not been blocked.
• Automatic cycle – Adjust to MAX, MORE or LESS DRY seing.
• Timed cycle - Allow more or less time.
• Clean the lint filter.
• Make sure the load isn’t too small. Small loads may not tumble
properly or dry evenly.
• Check load being dried. Heavy items dried with lightweight
items will not dry as quickly as the rest of the load.
• Refer to Sort section for proper sorting information.
Table continues...
Troubleshooting
©Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
15 Part No. 516318EN

Dryer Symptom Possible Cause/Solution
Dryer is noisy • Check dryer for foreign objects (nails, coins, bobby pins, metal,
plastic toys, etc.). Remove items from dryer.
• Make sure dryer is level. Uneven leveling can cause vibration.
• Normal operating sounds include the tick of timer advancing,
heat source going on and off, and humming of air moving
through the dryer and exhaust system.
Clothes are too wrinkled • Check heat seing. Overdrying can cause wrinkling.
• Check load size. Large loads may not tumble properly and may
cause wrinkling.
Clothes have odor • Check room for odors before drying clothes. Any odor (fried
foods, paint, varnish, cleaners, burning wood, etc.) will transfer
to clothing as the dryer draws air from the room.
• Ventilate room before drying clothes.
Cycle advances too slowly • Automatic cycles advance slower than the Time Dry cycle.
When in an Automatic cycle, the time it takes for the timer to
advance depends on the type and size of the load being dried.
When clothing has more moisture, the timer advances slower
than when the clothes are more dry.
Contact Information
If service is required, contact the nearest Factory Authorized
Service Center.
If you are unable to locate an authorized service center or are unsa-
tisfied with the service performed on your dryer, contact:
Alliance Laundry Systems
Shepard Street
P.O. Box 990
Ripon, WI 54971-0990
U.S.A.
www.alliancelaundry.com
Phone: [phone] Ripon, Wisconsin
[phone] Wevelgem, Belgium
When calling or writing about your unit, PLEASE GIVE THE MODEL
AND SERIAL NUMBERS. The model and serial numbers are located
on the nameplate. The nameplate will be in the location shown in Fig-
ure 1 .
Date Purchased ______________________________
Model Number ______________________________
Serial Number _______________________________
Please include a copy of your bill of sale and any service receipts you
have.
WARNING
To reduce the risk of serious injury or death, DO NOT
repair or replace any part of the unit or attempt any
servicing unless specifically recommended in the
user-maintenance instructions or in published user-re-
pair instructions that you understand and have the
skills to carry out.
W329
If replacement parts are required, contact the source from where
you purchased your unit or call [phone] or +32 56
41 20 54 for the name and address of the nearest authorized
parts distributor.
Troubleshooting
©Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
16 Part No. 516318EN

DRY2690N
1
1. Nameplate
Figure 1
Troubleshooting
©Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
17 Part No. 516318EN

Guide de l'utilisateur
Pour sécheuses
DRY725C_SVG
Traduction des instructions originales
Conserver ces instructions à titre de référence.
(Si la machine est vendue, le guide doit être remis au nouveau propriétaire.)
ca.alliancelaundry.com N° réf. 516318CA
Octobre 2016

Introduction
MISE EN GARDE
MISE EN GARDE
POUR DES RAISONS DE SÉCURITÉ, il faut suivre les
instructions données dans ce manuel pour minimiser
les risques d'incendie ou d'explosion et pour réduire
les risques de dommages à la propriété, de blessures
ou de décès.
W033
MISE EN GARDE
• Ne pas entreposer ni utiliser d’essence ou autres
gaz et liquides inflammables au voisinage de cette
machine ou de tout autre appareil électroménager.
• QUE FAIRE EN PRÉSENCE D’UNE ODEUR DE
GAZ :
• Ne pas tenter d’allumer un quelconque appareil.
• Ne toucher à aucun interrupteur électrique ; ne
pas utiliser de téléphone dans le bâtiment.
• Évacuer le local, le bâtiment ou la zone de tous
ses occupants.
• Téléphoner immédiatement à la compagnie de
gaz depuis une maison voisine.
• Suivre les instructions de la compagnie de gaz.
• Si la compagnie de gaz n’est pas joignable, ap-
peler les pompiers.
• L’installation et l’entretien doivent être effectués
par un installateur agréé, un service de réparation
ou la compagnie de gaz.
W052
Introduction
©Copyright, Alliance Laundry Systems LLC - NE PAS CO-
PIER ni TRANSMETTRE
3 N° réf. 516318CA