ALPHA LITE A Series User manual

USER MANUAL
BASE SOFT LIGHT A SERIES
July 2018

Safety Information /1
Safety Information
1. Do not open or disassemble the cover to reduce the risk of electric shock.
2. Please wear safety equipment such as safety helmet during work.
3. The work should be done under the direction of approved specialist
who is trained in safety and mechanical installations.
4. Be sure to fix the safety chain on the product when installing and moving.
5. Please install the signs below for people to bypass
when install the product on high truss.
WARNING

Summary /2
Summary
Safety Information
Summary
Fixture Information
Fixture Exterior View
Dimensions
Power Connection
Through and DMX512 Connection
Smart LCD Control
Setting
Error and Information Message
Technical Specifications
Photometric Diagram
Mode & DMX Channel
Cross Fader & Color Macro
RDM
DMX Protocols
1
2
3
4
5
8
9
10
12
13
14
15
16
17
18
19

Information /3
Information
A Series is a flat light source lighting fixture mainly used in
broadcasting studios, and it is excellent in diffusivity,
low in glare and not exposed to elements.
A Series is LED lighting with light color variable control.
2,900~6,000K color temperature control function and R,G,B,
Full color LED are used to create scenes fo all parts of the
performance or to create various sete of atmosphere.
A Series that uses high efficiency CRI LED light sources can
increase lifetime and reduce maintenance cost and
power consumption.

Fixture Exterior View /4
Fixture Exterior View
Stirrup
Handle
Connector
panel
LCD
Screen
Fixed
Knob

Dimensions /5
Dimensions (A4-1.2BF)
Updating
mm
(inch)

Dimensions /6
Dimensions (A6-1.6BF)
Updating
mm
(inch)

Dimensions /7
Dimensions (A8-2.4BF)
Updating
mm
(inch)

Power Connection /8
Power Connection
Power
Connection
Power
Connection
AC power at 100-250V, 50-60Hz
1. Observe the proper voltage range
2. If power is supplied outside the range, noise may be generated from the SMPS.
3. If the operating voltage is out of the proper voltage range,
SMPS function may be degraded or damaged.
1. ON/OFF SWITCH
2. POWER IN
3. POWER OUT
4. DMX IN
5. DMX OUT
6. USB PORT
1 2 3 4 5 6

DMX512
Connection
DMX-OUTPUT
XLR Mounting-sockets
DMX-INPUT
XLR Mounting-plugs
3-pin or 5-pin XLR sockets are equipped for DMX input and output, depending on user needs.
Connect the controller to a lighting, or lighting fixture to other lighting fixture.
If user uses a standard DMX controller, the DMX output of the controller can connect directly
to the DMX input of the first fixture in the DMX chain.
User must use an adapter cable for connect the DMX controller to other XLR output.
1-Shield
2-Signal (-)
3.Signal (+)
4-Not Connected
5-Not Connected
1-Shield
2-Signal (-)
3.Signal (+)
4-Not Connected
5-Not Connected
Connect the DMX output of the first lighitng fixture in DMX chain to the DMX input of the next
fixture, and connect one output to the input of the next fixture until all fixtures are connected.
In the last lighting fixture, the DMX cable must be end with a terminator(120 Ω resistor)
in DMX output signal (+, -).
Through and DMX512 Connection /9
Through and DMX512 Connection

Smart LCD Control /10
Smart LCD Control
Current Mode
Main Screen
DMX Address
The number indicates the address of the
DMX512. To change the DMX512 Address,
touch and input the value.
In normal operation, the number will not blink.
Intensity (Lighting Brightness)
Displays the brightness value(0~100%)
of the equipment.
Rotate Screen
Change the top and bottom of the LCD screen
according to the installation direction of
the equipment.
5
6
7
8
9
10
11
2
3
4
Setting
Setting or changing the function of
the equipment.
5
2
3
4

Smart LCD Control /11
Smart LCD Control
Wireless communication status
6
Current CRI
7
CCT (Color Temperature)
The number indicates the color temperature of the equipment.
In Mode 1, possible to set the color temperature value user want.
In Mode 2, displays the color temperature value by the channel setting.
Fixture ID Display
User can set and change any number(001~999) using the touch screen or RDM,
and it is not related to DMX512 Address.
After the input is completed, the set number is changed to the main screen.
8
9
Equipment Information
Displays model number, firmware version and equipment internal temperature.
10
Displays the strength of the connection signal with the wireless module.

Setting /12
Setting
12
14
11
13
Intensity (Lighting Brightness)
Brightness value is adjusted by touch on the
gradient or press +,-.
Channel Mode
1 : Dimming
2 : Dimming, CCT
7 : Dimming, CCT,
Cross Fader, RGBW
4 : Dimming, CCT,
Cross Fader, Color Macro
LCD Screen Setting
LCD ON : The screen stays on all the time.
LCD OFF 30s : After 30 seconds, the screen goes off.
11
12
13
Wire Set
Wire Mode: Connect DMX 512 cable
Wirelss Mode: Connect Wireless DMX 512
Unlink Function: Disconnect the link of
the wireless module.
14
*A4-1.2BF only availabe CH 1, 2 mode

Error and Information Message /13
Error and Information Message
Temperature
Sensor
Detects the temperature of the currnet equipment,
and appears the temperature on the LCD when it reaches a certain temperature.
- LED
- Drive
- Housing
Fan Sensor The fan speed level is displayed on the LCD by detecting the speed.

Technical Specifications /14
Technical Specifications
Physical Size 570x270x165mm
135°
6.3kg / Pole Up 8.3kg
Adjusting Sliding Stirrup, High Strength Tilt Lock
16mm / 28mm
±270°
100-240V, 50/60Hz
150W
Full 2900~6000K (Bi-Color)
Full RGB + White (4 Color Gamut with Hue and Saturation Control)
CRI 95~98
0~100% Continuous
5-PIN DMX In and Through, DMX Wireless, LCD On Board Controller, RDM
RDM Setup
-20~45°C
IP20
50,000 hours
Beam Angle
Weight
Handling
Mounting
Tilt Angle
Power Supply Range
Power Consumption
White Light
Color Rendition
Dimming
Control
Remote Device Management
Ambient Temperature Operation
IP Rating
Estimated LED Lifetime
A4-1.2BF A6-1.6BF A8-2.4BF
690x350x165mm
10.5kg / Pole Up 12.5kg
300W
447x315x165mm
7.9kg / Pole Up 9.9kg
240W

A4-1.2BF
A6-1.6BF
A8-2.4BF
375
505
785
3000
4000
6000
160
258
355
85
108
168
illuminance(lux)
Distance (m)
Flood 135°
01357 109
Photometric Diagrams /15
Photometric Diagrams

Mode & DMX Channel /16
Mode & DMX Channel
1 1 0-255 0-100 Dimmer
Mode Channel Value % Function
21 0-255 0-100
0-100
Dimmer
2 0-255 Color Temperature (CCT)
4
1
2
3
4
0-255
0-255
0-255
0-255
0-100
0-100
0-100
Dimmer
Color Temperature (CCT)
Cross Fader
Color Macro
7
1
2
3
4
5
6
7
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-100
0-100
0-100
0-100
0-100
0-100
0-100
Dimmer
Color Temperature (CCT)
Cross Fader
Red
Green
Blue
White

Cross Fader
Color Macro
[In 4 or 7 channel mode]
- When the DMX value of channel 3(Cross Fader) is 0,
the set color temperature(CCT) is displayed by channel 2.
- When the DMX value of channel 3 is 255,
only Red(channel 4), Green(channel 5), Blue(channel 6) and
White(channel 7) color values are displayed.
- As the DMX value of channel 3(Cross Fader) increases,
RGB and White values become darker.
- The DMX value of channel 3 adjusts relatively the brightness ratio
of channel 2 and channel 4~7.
Channel 4 is Color Macro express rainbow gradation effect.
The order is Red -> Green -> Blue
Cross Fader & Color Macro /17
Cross Fader & Color Macro
100%
Bright
Value
0%
0 255Cross Fader Value
1
V
(1-S)
0
0˚ 60˚ 120˚ 180˚ 240˚ 300˚ 360˚

RDM /18
RDM
Parameter ID Discovery command
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
SET command GET command
DISC_UNIQUE_BRANCH
DISC_MUTE
DISC_UN_MUTE
DEVICE_INFO
SUPPORTED_PARAMETERS
SOFTWARE_VERSION_LABEL
DMX_START_ADDRESS
IDENTIFY_DEVICE
DEVICE_MODEL_DESCRIPTION
MANUFACTURER_LABEL
DEVICE_LABEL
SENSOR_DEFINITION
SENSOR_VALUE
DMX_PERSONALITY
DMX_PERSONALITY_DESCRIPTION
STATUS_MESSAGES

DMX Protocols /19
DMX Protocols
MODE #1 DMX Value Function
MODE #2 DMX Value Function
CHANNEL 1
0~255
Dimmer 0~100%
CHANNEL 1
0~255
Dimmer 0~100%
CHANNEL 2
0~3
4~7
8~11
12~15
16~19
20~23
24~27
28~31
32~35
36~39
40~43
44~47
48~51
52~55
56~59
60~63
64~67
68~71
72~75
2900
2950
3000
3050
3100
3150
3200
3250
3300
3350
3400
3450
3500
3550
3600
3650
3700
3750
3800
MODE #2 DMX Value
76~79
80~83
84~87
88~91
92~95
96~99
100~103
104~107
108~111
112~115
116~119
120~123
124~127
128~131
132~135
136~139
140~143
144~147
148~151
152~155
156~159
160~163
164~167
Function
3850
3900
3950
4000
4050
4100
4150
4200
4250
4300
4350
4400
4450
4500
4550
4600
4650
4700
4750
4800
4850
4900
4950
CHANNEL 2
MODE #2 DMX Value
168~171
172~175
176~179
180~183
184~187
188~191
192~195
196~199
200~203
204~207
208~211
212~215
216~219
220~223
224~227
228~231
232~235
236~239
240~243
244~247
248~255
Function
5000
5050
5100
5150
5200
5250
5300
5350
5400
5450
5500
5550
5600
5650
5700
5750
5800
5850
5900
5950
6000
CHANNEL 2