ALPHA LITE E Series User manual

LED LIGHTING FOR UHD BROADCASTING
EST.2008
USER MANUAL
BASE LIGHT
E SERIES

1
1. Do not open or disassemble the cover to reduce the risk of electric shock.
2. Please wear safety equipment such as safety helmet during work.
3. Be sure to fix the safety chain on the product when installing and moving.
4. Please install the signs below for people to bypass
when install the product on high truss.
5. The work should be done under the direction of approved specialist
who is trained in safety and mechanical installations.
6. The brightness and color temperature before and after aging may be different.
Safety Information
WARNING

2
Safety Information 1
Contents 2
[Fixture Information]
Fixture Information 3
FixtureExteriorView 4
Dimensions 5
TechnicalSpecifications 9
PhotometricDiagram 10
SideReflectionSystem 11
[Fixture Installation]
Power Connection 12
DMX Connection 13
[LCD Screen Instruction]
Unlocking 14
Screen Instruction 15
Menu Tree 16
Main Screen by Mode
& Product Information 17
DMX Mode
(Channel Change & Address Setup) 18
User Mode
(Intensity& Color TemperatureAdjust) 19
Color Mode
(Not applicable model)
[Extra Function]
Sleep Mode Function 20
Master Function 20
RDM Function 20
Dimming Speed Setup 20
Fixture ID Number Setup 21
Fixture Label Setup 21
[Error Information]
Temperature Sensor 22
Network Connection 22
[Protocols]
DMX Protocols 23
RDM Protocols 25
Contents

3
Fixture Information
Flat light source lighting fixture, which is mainly used in broadcast studio, can create a variety of
atmospheres in the set.
Excellent light quality, and average CRI 95~98 / R9, R12 are CRI 90 or higher
The LED source sets on the side(edge) with reflection and pattern optical technology applied.
The LED source is not directly visible, no glare and extremely soft light distribution
No fan and noiseless
2900~6000K color temperature control function
Support RDM network communication and various mode setting possible
Smart touch control method makes it easy and convenient to check all information at a glance
When the DMX signal is shorted, the last signal is maintained.
Long life, reduce maintenance costs and power consumption.
(Option) 2.4GHz Wireless DMX512 support available
(Option) Honeycomb attached condensing light 60 degrees and prevents diffuse reflection.

4
Fixture Exterior View
Yoke
Smart Touch
LCD Screen
Handle
Connector
Panel
Fixed Knob

5
(Option) Honeycomb
Fixture Exterior View
Yoke
Smart Touch
LCD Screen
Handle
Connector
Panel
Fixed Knob

6
Dimensions (E1360)
mm
(inch)

7
Dimensions (E2040)
mm
(inch)

8
Dimensions (E2440)
mm
(inch)

9
Dimensions (E3060)
mm
(inch)

10
E1360 E2040 (E4) E2440 (E6) E3060 (E8)
Physical Size 774 x 212 x 154mm 571 x 296 x 112mm 571 x 365 x 112mm 777 x 419 x 112mm
Beam Angle 135°
Weight (kg/lbs) 8.6 / 19 6.7 / 14.8 8.2 / 18.1 12 / 26.5
Handling Adjusting Sliding Stirrup, High Strength Tilt Lock
Mounting 16mm / 28mm
Tilt Angle ±270°
Power Supply Range AC 100-240V, 50/60Hz
Power Consumption 200W 150W 200W 300W
White Light (CCT) Full 2,900~6,000K (VCT)
CRI 95~98
TLCI 95~98
Dimming 0~100% 16-bit
CCT Deviation ±100K
Control 5-PIN DMX In and Out, Smart Touch LCD Controller, RDM,
(Option) Wireless DMX512, Wireless RDM
Remote Device Management Supported
Ambient Temperature Operation -20~45°C
IP Rating IP20
Estimated LED Lifetime Over 50,000 hours
Technical Specifications
▪This specification data isbased on the aging state of the equipment,and the brightness and color temperature before and after aging may be different .

11
Photometric Diagram
E1360
E2040
E2440
E3060
343
277
349
548
141
123
148
225
77
69
82
122
45
41
50
76
9

12
Side Reflection System
Light
Reflection
Sheet
LGP
(Lamp + Reflector)
Ad Film
Reflection
Sheet
LGP

13
Power Connection
1. Observe the proper voltage range
2. If power is supplied outside the range, noise may be generated from the SMPS.
3. If the operating voltage is out of the proper voltage range,
SMPS function may be degraded or damaged.
AC power at 100-240V, 50-60Hz
1. POWER ON/OFF SWITCH
2. POWER IN
3. POWER OUT
4. DMX IN
5. DMX OUT
6. USB PORT(forFirmwareUpdate)
(Do not connect USB
without administrator's permission.)

14
DMX Connection
1-Shield
2-Signal (-)
3-Signal (+)
4-Not Connected
5-Not Connected
1-Shield
2-Signal (-)
3-Signal (+)
4-Not Connected
5-Not Connected
DMX-INPUT
XLR Mounting-plugs
DMX-OUTPUT
XLR Mounting-sockets
3-pin or 5-pin XLR sockets are equipped for DMX input and output, depending on user needs.
Connect the controller to a lighting, or lighting fixture to other lighting fixture.
If user uses a standard DMX controller, the DMX output of the controller can connect directly
to the DMX input of the first fixture in the DMX chain.
User must use an adapter cable for connect the DMX controller to other XLR output.
Connect the DMX output of the first lighitng fixture in DMX chain to the DMX input of the next fixture, and connect one
output to the input of the next fixture until all fixtures are connected.
In the last lighting fixture, the DMX cable must be end with a terminator(120 Ω resistor)
in DMX output signal (+, -).

15
Unlocking
Main Screen (Locked) Fixture ID Screen (Locked)
When the fixture is turned on, the Smart Touch screen automatically locked.
To unlock the touch screen, touch the finger icon( ) three times.
If you do not touch for 30 seconds, the lock is reset.
A
A
A

16
Screen Instructions
1
Current Mode
Display DMX MODE or USER MODE or COLOR MODE.
2
Current Channel Mode
Display current channel mode (only display on DMX MODE)
3
DMX512 Address
Display current DMX512 Address.
4
Brightness (Intensity)
Displays the brightness value(0~100%) of the equipment.
5
CCT (Correlated Color Temperature)
Displays the color temperature(2900~6000K) of the equipment.
6
Fixture
Current Temperature The current temperature of the instrument is detected and displayed in °C.
7
Activated Function Control Bar
Adjust the selected function among Intensity, Color Temperature and Tint.
8
Home
Return to the main screen
9
DMX512 Mode & Address Setup
Set channel mode and DMX512 address
10
User Mode Setup
Set ‘Intensity’ and ‘CCT’ manually
11
ColorModeSetup(
Notapplicablemodel)Set ‘RGB’ lighting color, ‘Saturation’, and ‘Intensity’
12
Setting
Setting or changing the function of the equipment.
13
Fixture ID
Displays numbers for equipment management.
14
Equipment Information
Displays the help that describes the screen.
15
Screen Rotation
LCD screen is rotated 180°for each touch.
16
Sleep Mode Setup
Activate and deactivate LCD Auto off function
17
Master Setup
Activate and deactivate Master function
18
RDM Mode Setup
Activate and deactivate RDM function
19
Dimming Speed Setup
Set dimming speed
1 2
3
4 5
7
8
9
10
11
14
15
12
13
Main Screen (Unlocked)
Setting Screen
16
17
18
6
19

17
Menu Tree
ΘSetting
Sleep mode setup
Master function setup
RDM mode setup
Dimming speed setup
ΘInformation
Description of each function
ΘFixture ID
ΘFixture ID screen
Fixture ID number input
ΘInformation
Description of fixture ID
ΘInformation
Basic equipment information
ΘRotate
ΘHome (Main screen)
ΘDMX512 Mode
DMX mode select
DMX address input
ΘInformation
DMX channel value
ΘUser Mode
Intensity setup
Color temperature setup
ΘInformation
Description of each function
ΘColor Mode (Not applicable model)
RGB color setup
Saturation setup
White setup
ΘFull screen
Individual RGB setup and Preset
ΘInformation
RGBW value

18
Main Screen by Mode & Product Information
The current mode is displayed among DMX mode, user mode and color mode(not applicable model) in the upper left corner of
the main screen, and the DMX address number of the equipment is displayed in the middle with a yellow number.
At the bottom, the current lighting value and fixture temperature are displayed, and some lighting value can be adjusted on the
main screen by touching the value.
User can check information such as manufacturer, product model name, firmware version, UID
number, current temperature of equipment, usage time of equipment, LED usage time, website,
manual download link, etc. by clicking the INFO button on the main screen.
Through each ‘Menu – INFO’ touch, user can check the menu description and functions
Description and
function of each menu
(DMX MODE) (USER MODE) (COLOR MODE)

19
DMX Mode Channel Change & Address Setup
- 1 (1 Ch Mode) : Dimming
- 2 (2 Ch Mode) : Dimming, CCT
Pressing the Info button in DMX512 MODE, displays each channel information and value.
To return to the previous screen, press the Info button again.
*Support channels and features vary by product.
User can move to the DMX channel change screen by selecting ‘DMX512 MODE’ button in main screen.
In DMX512 MODE screen, user can select DMX channel mode on top tap, and input DMX512 address
by pressing the number pad.
- DMX MODE : It is used to adjust by DMX512 signal.