ALPHA LITE DS-PAD User manual

BEAUTY SOFT LIGHT DESK PAD
USER MANUAL
Mar 2019

Contents
Contents
3
[Fixture Information]
Fixture Information
4
Dimensions
5
Technical Specifications
6
Charging and Power Connection
7
[Screen Explantion]
Screen Explation
8
[Setting]
Brightness (Intensity) Adjust
9
CCT (Correlated Color Temperature) Adjust
10
- 3 -

Fixture Information
DS-PAD is a flat light source lighting fixture mainly used in
broadcasting studios, and it is excellent in diffusivity,
low in glare and not exposed to elements.
The LED lighting source sets on the side(edge) with reflection and
pattern optical technology applied, so it produces very soft light.
Color temperature control in the range 2,900~6,000K is possible,
and it uses high-efficiency CRI LED light sources can increase
lifetime, reduce maintenance cost and power consumption.
DS-PAD is used to set up on the desk for a person in newsroom.
Buil-in battery for easy installation and positioning, and the
battery can continuously operate for about 2.5 hours can be used.
Jog Switch
Power &
Charging Port
Power
Switch
LCD Screen
Bracket
- 4 -

mm
(inch)
Dimensions (DS-PAD)
240
(9.44)
65
(2.55)
215
(8.46) ~47 (~1.85)
196
(7.71) 22 (0.86)
22
(0.86)
90
(3.54)
48
(1.88)
90
(3.54)
29
(1.14)
52
(2.04)
40
(1.57) 75 (2.95)
25
(0.98)
120
(4.72)
99
(3.89)
52
(2.04)
75
(2.95)
9
(0.35)
- 5 -

Technical Specifications
DS-PAD
Physical Size
240x90x29mm
Beam Angle
135°
Weight (g/lbs)
620 / 1.36
LED Chip
0.2W / 0.5W
Power Consumption
18W
White Light (CCT)
Full 2,900~6,000K (Bi-Color)
Color Rendition
CRI 95~98
Dimming
0~100% Continuous
Control
Jog Switch Controller
Housing Color
Silver
IP Rating
IP20
Estimated LED Lifetime
Over 50,000 hours
Battery Mode Light
Battery Type
Lighting Time (Full Charge)
3~4 hours
Power Voltage Input
12.6V DC
When the fixture is fully charged, the lighting time of the fixture is 3~4 hours, depending on
the brightness of the lighting.
When the brightness of the light is set to 100%, the output of the light will decrease slightly
after 3 hours.
Light Output
- 6 -

This fixture requires an external power adapter of 12.6V DC.
1. Please make sure to use correct voltage range.
2. If the operating voltage is outside the correct voltage range,
the function of the fixture may be degraded or damaged. .
3. Be sure to use the supplied power adapter.
1
Power Switch
Turn the fixture off and on.
2
Jog Switch
Menu switching, brightness and color temperature
can be adjusted.
3
Power Input
Connect the 12.6V power supply to charge the device.
It can be used with the power adapter connected.
1 2 3
Charging and Power Connection
- 7 -

Screen Switching
The menu screen changes
each time press the jog.
Start Screen
Current Status
Screen
Brightness
Adjustment Screen
CCT Adjustment
Screen
Visible screen at start up.
Current battery status (25% each
, 4 bars), color temperature
value (KELVIN), light brightness
value (%) are displayed.
Press the jog switch to go to
'Brightness setting’ screen.
Current battery status (25% each
, 4 bars) and the light brightness
value are displayed, and the
value (%) can be adjusted with
the jog switch.
Press the jog switch to go to
the 'Color temperature setting’
screen.
Current battery status (25% each
, 4 bars) and the lighting color
temperature value are displayed,
and the value (Kelvin) can be
adjusted with the jog switch.
Press the jog switch to go to the
'Current Status' screen.
PUSH
Screen Explation
- 8 -

UP
DOWN
The value automatically
increases when hold
the jog switch up.
Can be set up to 100%.
PUSH
Go to the next menu screen
The value is
increased 1% by
each time lift up
the jog switch.
Can be set up to
100%.
The value automatically
decreases when hold
the jog switch down.
Can be set up to 0%.
The value is
decreased 1% by
each time lower
down the jog
switch.
Can be set up to
0%.
Brightness (Intensity) Adjust
- 9 -

UP
DOWN
PUSH
Go to the next menu screen
The value automatically
increases when hold
the jog switch up.
Can be set up to
6,000K.
The value is
increased 50K by
each time lift up
the jog switch.
Can be set up to
6,000K.
The value automatically
decreases when hold
the jog switch down.
Can be set up to
2,900K.
The value is
decreased 50K by
each time lower
down the jog
switch.
Can be set up to
2,900K.
CCT (Correlated Color Temperature) Adjust
-10 -

LED Intelligent Lighting Solution
For more information and questions,
please visit our website or call.
ALPHA LITE Co., Ltd.
2nd~3rd Floor, 5-8, Gyeongin-ro 88-gil, Yeongdeungpo-gu, Seoul, Republic of Korea, 07363
Email
Tel
Fax
Web
[email protected]
([phone]
([phone]
www.alpha-lite.net
:
:
:
: