Altinex UT240-325S User manual

UT240-325S User’s Guide
400-0594-001
1
Welcome!
We greatly appreciate your purchase of a UT240-325S. We
are sure you will find it reliable and simple to use. Superior
performance for the right price, backed by solid technical and
customer support is what Altinex has to offer.
We are committed to providing our customers with Signal
Management Solutions®to the most demanding audiovisual
installations at competitive pricing and welcome you to join the
ranks of our many satisfied customers throughout the world.
1. Precautions and Safety Warnings
Please read this manual carefully before using your
UT240-325S. Keep this manual handy for reference. These
safety instructions are to ensure the long life of your
UT240-325S and to prevent fire and shock hazards. Please
read them carefully and heed all warnings.
1.1 General
•There are no user serviceable parts. Qualified Altinex
service personnel must perform all service.
1.2 Handling
•To prevent fire or shock, do not expose to water or
moisture. Do not place in direct sunlight, near heaters, or
heat-radiating appliances, or near any liquid. Exposure to
direct sunlight, smoke, or steam can harm internal
components.
•Handle carefully, dropping or jarring can cause damage.
•Do not pull any cables attached to the UT240-325S.
•Do not place heavy objects on top of the UT240-325S.
1.3 Cleaning
•Unplug the UT240-325S before cleaning.
•Clean only with a dry cloth. Never use strong detergents or
solvents such as alcohol or thinner. Do not use a wet cloth
or water to clean the unit. Do not open the unit to clean.
1.4 FCC Notice
•This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio
frequency energy and if not installed and used in
accordance with instructions found herein, may cause
harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause
harmful interference in which case the user will be required
to correct the interference at his own expense.
•Any changes or modifications to the unit not expressly
approved by ALTINEX, Inc. could void the user’s authority
to operate the equipment.
2. Installation Procedures
The UT240-325S may install horizontally or vertically as shown. Typically, units install under a tabletop,
but may also install inside a desk opening, or on the back of a desk or podium.
Step 1. Locate the best position for the UT240-325S, but do NOT mount it until cables are ready.
Step 2. Prepare the mating cables using high-quality cables for best results and durability. Make sure
the cables are long enough to allow for a service-loop and so they may be routed neatly
beneath the table to their destinations.
Step 3. Prepare network cables using the CAT-6 (RJ-45) connectors provided with the unit. The
connectors are high-quality snap-in connectors and do not require any tools for installing them
into the UT interconnect.
Step 4. Secure the unit under the table using the metal screws provided with the unit.
Step 5. Make any necessary connections to the snap-in connectors.
Step 6. Use cable-ties to secure the cables to the mounting shelf.
Insert the ties through the holes on the bottom of the unit.
Step 7. Use the cable clamps provided to secure the cables to the bottom of the table/desk.
3. Limited Warranty/Return Policies
Please see the ALTINEX website at www.altinex.com for details on warranty and return policies.
Installation Options
Note: The connectors are provided without cables.
We recommend a telecommunications
contractor wire the network connectors and
verify operation before installing.

UT240-325S User’s Guide
400-0594-001
2
4. Technical Specifications
Specifications are subject to change. See www.altinex.com for up-to-date information.
Features/Description
UT240-325S Series
Pass-Through
(Front to back)
AC Power
NEMA Receptacle to plug
9-10 ft. (2.7-3.0 m) cord
Audio, Stereo TB
3.5 mm F to Term Block (2)
Network (CAT-6)
Snap-in RJ-45 connector
(no cable) (2)
Video, Digital
19-pin HDMI bulkhead, F-F
connector (2)
Agency Approvals
UL/CUL Listed
(File E254082)
UT240-325S
Accessories Included
Hardware
Mounting hardware
Table 1. UT240-325S General
Mechanical
UT240-325S
Dimensions
See Application Diagram
Maximum Shipping Weight*
3.5 lb. (1.6 kg)
TOperating [TMaximum]
10C-35C [50C]
Humidity
90non-condensing
Shipping Weight
3.1 lb.
Table 2. UT240-325S Mechanical
Electrical
UT240-325S
Pass-Through Signals
All standard audio, video, and
network signals are acceptable.
Pass-Through AC
12 A, 1440 W max.
(total through all receptacles)
Table 3. UT240-325S Electrical

UT240-325S User’s Guide
400-0594-001
3
5. About Your UT Interconnect
The Altinex UT240-325S Under-the-Table AV
Interconnect provides a wide variety of options
for routing computer audiovisual signals,
network connections, and AC power.
Under-the-table options are ideal for situations
where it is too expensive or impractical to install
the routing interface directly into the furniture.
The UT240-325S offers tabletop solutions with
trouble-free snap in keystone connectors. The
elegant design is low-profile and designed to fit
under the table offering a practical and easily
accessible user interface.
Each unit comes standard with 2 AC receptacles and factory configured keystone connectors. The UT240-325S connects to standard
AC power outlets through a single 9-10 ft. (2.7 to 3.0 m) power cord that is permanently attached to the unit. The power module is also
housed in an enclosure made of steel alloy which makes it a durable frame and remains lightweight as a whole unit.
The CAT-6 (RJ-45) connectors are snap-in style connectors that attach to a support bracket inside the faceplate. The connectors must
be “snapped” out of the bracket, wired to the CAT-5/6 cable, and then “snapped” back in. The UT240-325S also has blank slots that
allow for simple onsite customization with various keystones to choose from. Units have two female-to-female bulkhead connectors for
19-pin HDMI. The video receiving devices attach to the panel mount connectors accessible on the back of the unit allowing for easy and
secure connectivity. These units also have two 3.5 mm terminal blocks that allow for secure audio by adjusting captive screws on the
terminal sides.
UT240-325S shown here.

UT240-325S User’s Guide
400-0594-001
4
6. Application Diagrams
Diagram 1: Typical Setup

UT240-325S User’s Guide
400-0594-001
5
Diagram 2: UT240-325S

UT240-325S User’s Guide
400-0594-001
6
Diagram 3: Audio Wiring (terminal block)

UT240-325S User’s Guide
400-0594-001
7
7. Operation
The UT240-325S requires no adjustments for performance. Once set-up, the UT240-325S will work trouble-free without user
intervention.
8. Troubleshooting Guide
We have carefully evaluated and found no problems in the supplied UT240-325S; however, if you experience any problems or have
questions, call Altinex at [phone].