Amantii WM-BI-2428-VLR-BG Owner's manual

INSTALLATION ANDOPERATION INSTRUCTIONS
INSTALLER: LEAVE OWNER’S MANUAL WITH THE APPLIANCE.
CONSUMER: RETAIN OWNER’S MANUAL FOR FUTURE REFERENCE.
SAFETY INFORMATION
WARNING
For yo r safety, always comply with all
warnings and safety instr ctions
contained in this man al to prevent
personal inj ry or property damage.
Do not store or use gasoline or other flammable vapors
and li uids in the vicinity of this appliance.
Dated - 06.27.21 AC
WM-BI-2428-VLR-BG

2
TABLE OF CONTENTS
Please readandcarefully followall oftheinstructionfoundin this manual. Theinstructions
includedhere will assure thatyouhavemanyyears ofdependable and enjoyable servicefromyour
Amantii product.
IMPORTANTINSTRUCTIONS.......................................................................................................................3
UNPACKINGAND TESTINGAPPLIANCE....................................................................................................4
GROUNDINGAPPLIANCE............................................................................................................................4
LOCATINGTHEFIREPLACE........................................................................................................................4
CLEARANCES WHEN BUILT-IN....................................................................................................................5
INSTALLATION-WALLMOUNT.....................................................................................................................7
WM-BI-2428-VLR-BG.....................................................................................................................................8
INSTALLATIONOVERVIEW MASONRYFIREPLACES............................................................................9
INSTALLATIONOVERVIEW ZERO-CLEARANCE(METAL)FIREPLACES............................................10
HARD-WIREINSTALLATION......................................................................................................................11
MEDIAOPTIONS.........................................................................................................................................12
FIREGLASS MEDIAINSTALLATION..........................................................................................................12
CHANGETHEFRONTFLATGLASS TOCURVE GLASS.........................................................................12
OPERATION.................................................................................................................................................13
MANUALOPERATION.................................................................................................................................13
REMOTECONTROLOPERATION..............................................................................................................14
INSTALLING WALLTHERMOSTAT.............................................................................................................15
REPLACEMENTPARTS..............................................................................................................................16
EXPLODEDVIEW........................................................................................................................................17
TROUBLESHOOTING................................................................................................................................18
SERVICEHISTORY.....................................................................................................................................19
WARRANTY.................................................................................................................................................20

3
IMPORTANT INSTRUCTIONS
Read allinstructionsbeforeinstalling orusing thisheater.
2.Keep combustiblematerials,suchasfurniture,pillows,bedding,papers,clothesand
curtainsatleast3feetfromthe frontofthe heater;keep themawayfromsidesand rear
aswell.
3.Always unplugheaterwhen it’snotinuse.
4.Donotoperatethe fireplaceifit hasadamagedcordorplug, afterit hasmalfunctioned, or
if theunit hasbeendropped ordamaged inanyway.
5.Donot usethe heateroutdoors.
6.Thisheaterisnotintended foruseinbathrooms,laundryareasand similarindoor
locations.Neverplacethe heaterwhereitmayfall intoabathtuborotherwater
containers.
7.Donotrun the cordundercarpeting.Donotcoverthe cordwiththrowrugs,runnersor
anything else.Arrangethe cordawayfromtrafficareaswhereitcouldnotbetrippedover.
8.Todisconnecttheheater,turnthe controlsto"OFF"beforeremoving theplug fromthe
outlet.
9.Donotinsertorallowforeignobjectstoenteranyventilationorexhaustopening,asthis
maycausean electricshock, fireordamage tothe heater.
10.Toprevent apossiblefire, do not block airintakesinanymanner.
11.Aheaterhashotand arcing orsparkingpartsinside.Donotuseitinareaswhere
gasoline, paint orflammableliquidsareused orstored.
12.Usethisheateronlyasdescribed inthismanual. Anyotherusenotrecommended bythe
manufacturermaycausefire, electricshock orinjurytopersons.
13.Always useproperlygroundedfused and polarizedoutlets.
14.Always usegroundfaultprotection whereitisrequiredbyelectricalcodes.
15.Always disconnectthepowerbeforeperforming anycleaning,maintenanceorrelocation
of the heater.
16.Toprevent apossiblefire, do not burnwood orothermaterialsinthisheater.
17.Topreventelectricshock orfire,always useacertified electrician,shouldnewcircuitsor
outletsbe required.
When transporting orstoring the heater,keepitinadryplace,free fromexcessive
vibration.
1.
18.

4
UNPACKINGANDTESTINGAPPLIANCE
Carefullyremovetheappliancefromthebox. Removethepackingscrewsfrombothsidesofthe
fireplace.
Priortoinstallingtheappliance,testtomakesuretheapplianceoperatesproperlybypluggingthe
powersupplycordintoaconvenientlylocated 120 Volt grounded outlet.
Testallaspectsofitsoperation(manualswitches, remoteand heater)tomakesure all components
operatecorrectly.
GROUNDINGAPPLIANCE
This applianceis foruseon 120Volts.Thecordhasaplugasshownin(A). Anadapterasshownin(C)
is availableforconnectingthree-bladegroundingtypeplugstotwo-slotreceptacles.Thegreen
groundinglugextendingfromtheadaptermustbeconnectedtoapermanentground suchasa
properlygroundedoutletbox. Theadaptershouldnotbeusedifathree-slotgroundedreceptacleis
available.
To disconnectappliance,turn controls to off,
then removeplugfromoutlet.
LOCATINGTHEFIREPLACE
Planwhere tolocateandframethefireplace.This will savetimeandmoneylaterwhenyouinstall
thefireplace.Beforeinstallationconsiderthefollowing:
1. Where thefireplaceis locatedmust allowforwallandceilingclearances
Packing Screw
Located Here

5
2. Consideralocationwhere thefireplacescreenwill notbeexposedtodirectsunlight from
windowsordoors.
3. A15 ampere,120 Volt,60 Hz branchcircuit with properground mustbeavailableatthelocation.
Preferablyadedicatedbranchcircuitshouldbeprovidedtoavoidcircuitbreakerstotripoffuses
toblow.
CLEARANCES WHEN BUILT-IN
Thefireplacemaybeplacedwithin a framedenclosurethatis level, dry andcapable ofsupporting
theweightoftheapplianceandfront glass. Itmaybeplaceddirectly onwoodor anon-combustible
surface(notonlinoleumor carpet). Theminimum clearancefromthetopoftheappliancetoa
mantel(combustibleornon-combustible)is 10”(25.4cm). Thesides andbackmustmaintain
1"(2.54cm) clearancetoanymaterial. Thetopmustmaintaina3/8”(0.95cm) clearancetoany
material.
Wall
MINIMUM 3/8" (0.95cm) CLEARANCETOTOP
OFAPPLIANCE(combustibleor non-combustible)
MINIMUM 1"(2.54cm) CLEARANCETO
SIDESAND BACKOFAPPLIANCE
(combustibleor non-combustible)
MANTEL( maximuM12" (30.48cm) deep
FRONTGLASS
FLOOR
Min10" (25.4cm)

6
Pleasesee thefollowingfigures. Itshowsthe dimension of fireplacewhen itinstall indifferent
way.
a.Fireplacewithflatglass insert tothe wall.
b.Fireplacewithcurveglass insert tothe wall.
c.Fireplacewithcurveglass inacornerd.Fireplacewithflat glass inacorner.
1"
43
4" 61
4"
18"
18"
191
2"
191
2"

7
INSTALLATION-WALL MOUNT
1. Selectalocationthatis notproneto
moistureandis locatedatleast0.91m or3
feetawayfromcombustible materials such
as curtains or drapes, furniture,bedding,
paper, etc.
2. Refer toFig. 1rightselecta suitable
positioninwhichtomounttheheater
horizontally use a spirit level toachieve
this.
3. Checkthewall toensurethere is nowiring,
pipewiresetcin thearea tobedrilled.Drill
8ormore holes(8mm diameter&40mm
depth)using a suitable sizedrill andputthe
wall plugs into theholes.
4. Takeoutthehanger from thefireplaceby
unscrewthescrew.ReferringtoFig.2in
right.
5. Referring toFig. 3fix thehanger tothe
wall.
Warning!Always ensurethefireplaceisat
least 24" or 61 cmbelowtheceiling!
Be surethatthebolts havebeenfixed
firmlyenoughtowithstand theweight！
Fig. 1
Fig. 2
Fig.3

8
WM-BI-2428-VLR-BG
Description Built-inorWall mount Appliance
Voltage 120V AC60Hz
Watts 1465WMax
NOHEATER 25W
MOTOR HEATER 19W
ApplianceWidth 24”or61 cm
ApplianceHeight 28”or71.1 cm
ApplianceDepth 9 1/8”or23.2 cm
Gross Weight 57.2 lbsor26kg
PlugLocation Left side
Cord Length 707/8”or180 cm
RoughWallOpening
Size 20”×26“or 50.8 cm×66 cm
BTU 5000
This appliancehasbeentestedin
accordancewiththeULStandard2021
forfixedandlocationdedicated
electricroomappliancesintheUnited
Statesand Canada.Ifyouneed
assistanceduringinstallation,please
contactyourlocal dealer.
NOTE:Thisappliancemustbe
electricallywiredandgroundedin
accordancewithlocalcodes.Inthe
absenceoflocalcodes,usethe
currentCSAC22.1CanadianElectrical
Codein CanadaortheANSI/NFPA70
NationalElectricalCodein theUnited
States.
24"[610mm]
28"[711mm]
91
8"[231.3mm]
1"[25.4mm]
243
4"[628.4mm]
177
8"[452.6mm]
63
4"[170mm] 145
8"[371mm]
161
8"[410mm]
81
8"[205.5mm]

9
2” (50mm) Minimum











HINT:
Paint the interior of the
fireplace with latex paint to
prevent fireplace odors
from entering the home.
Silicone































































































































































































































Leveling Bolts
HINT:
Close and seal the damper
to prevent air infiltration.
Cover plate is required if chimney
does not have suitable rain cap.
A Code-Conforming (jacketed, grounded) receptacle
may be placed within the fireplace. Do not place it above
the fireplace insert.
The surround glass extends 1"
below the base of the insert.
Attach the "This fireplace has been altered..." plate
to the fireplace (use two screws or other suitable
method). You may wish to place it in a location
where it will be covered by the surround glass.
on the insert to secure the
secure the bracket to the
insert from tipping. Secure
brackets to both sides.
INSTALLATIONOVERVIEW MASONRYFIREPLACES

10
INSTALLATIONOVERVIEW ZERO-CLEARANCE(METAL)FIREPLACES






























2” (5.08cm
Minimum











































































































































The log shelf,
screen, and doors
(if present) must
be removed.



















































































HINT:
Paint the interior of the
fireplace with latex paint to
prevent fireplace odors
from entering the home.
HINT:
Close and seal the damper
to prevent air infiltration.
Cover plate is required if chimney
does not have suitable rain cap.


If the firebox steps down greater than
1", place shims (plywood, tile, etc.)
under the leveling bolts to provide
adequate leveling.
Silicone
The surround glass extends 1"
below the base of the insert.













A Code-Conforming (jacketed, grounded)
receptacle may be placed within the fireplace. Do
not place it above the fireplace insert.
Leveling Bolts
Attach the "This fireplace has been
altered..." plate to the fireplace (use
two screws or other suitable
method). You may wish to place it in
a location where it will be covered by
the surround glass.
Use one of the rear screws
on the insert to secure the
included tie-down bracket to
the fireplace. Once in place,
secure the bracket to the
fireplace floor to prevent the
insert from tipping. Secure
brackets to both sides.

11
HARD-WIRE INSTALLATION
Turnofftheappliancecompletelyand let coolbeforeservicing.Onlyaqualifiedserviceperson
should serviceandrepairthiselectricappliance.
If itis necessarytohardwirethisappliance,aqualifiedelectricianmustremovethecordconnection,
and wiretheappliancedirectlyto thehouseholdwiring.
This appliancemustbeelectricallyconnectedandgroundedinaccordancewith localcodes,ifhard
wired.Intheabsenceoflocal codes, usethecurrentCSA C22.1CANADIANELECTRICAL CODEin
CanadaorthecurrentANSI/NFPA70 NATIONAL ELECTRICAL CODEintheUnited States.
1. Removethecoverplatefromtheleftsideoftheappliancebyremovingthetwoscrews, as
shownbelow.Unscrewand removepowercord.
2. Attachthewiringtothejunctionblock.Pleasemakesurethelivewiregoesintothe “L”,the
neutral wireinto “N”and thegroundwireinto “G”.
3. Puttheplatebackandscrew back.

12
MEDIAOPTIONS
This fireplaceshippedwith oak log set and sable.
sable
FIRE GLASS MEDIAINSTALLATION
Unplugtheunitfromwall and makesure
controls areswitchedoff.Pleaserefertopage4
theunpackingandtestingtheappliance.
Pourthefireglass media intothetray.Feelfree
touseanycombinationoffire glass mediathat
youfind mostappealing.Put backthefront
glass afteryoufinish install thefire glass.
CHANGETHEFRONTFLATGLASS TO
CURVE GLASS
1.Takeoffthefront flat glass.
2. Unscrewthescrewsandtakeoffthetray
glass holderbracket and thetrayglass.
3. Usethenewtrayglassholderbracketforthe
curveglass.
4.Changethenewtrayglass andscrewthe
bracket.
Youcan displaytheglass media andthelog set
as in FIREGLASS MEDIA INSTALLATION.
Hook the new curve glass andenjoy
yournew style fireplace.
oak log set

13
OPERATION
Thefireplacecanbeoperatedeitherbytheswitcheslocatedontheleftfront ofthefireplaceunitor
bysupplied remotecontrol.
MANUAL OPERATION
1. ThemainpowerON/OFFswitchinpositionO,thefireplaceis OFF.
2. WhenmainpowerON/OFF switchis at position I,thefireplaceis readyto use.
3. Press thebuttonrepeatedlytosettheheatertodesiredheatsetting.Theheaterindicator
LED will glowwhichshowsthecurrent heatersettings.
a) RED 1465W HEAT OUTPUT
b) BLUE750WHEAT OUTPUT
c) PURPLE AUTOMODE
AUTO MODE
Under this modetheheater will automatically turnONathighheatsetting1465W heatoutputwhen
theroom temperature drops below22 (72 ℉ ). Whentheroomtemperatureis between
22-25 (72-77℉)theheater output will switchtolowheatsetting750W.Whentheroom
temperature goesabove25 (77℉)theheaterwill beturnedoff andthecycle will continue.The
LED indicatorwill bePURPLE in colourunder this mode.
4. Flameeffect:Press thebuttonmarkedtoadjusttheflamebrightness.Theflamebrightness
will cyclethrough Low-Medium-High-OFF.
5. Moodlight effect:Press thebuttonmarked to changethemoodlight colour.
NOTE: IfoperatedattheLowheatsetting,thefireplacewill notprovideasmuchheatoutputasin
theHighheatsetting,howeverthelowsettingwill notrequireasmuchelectrical powertooperate.
Toavoidoverloadingacircuit,donotplugthefireplaceintoacircuitthatalreadyhasother
appliancesworking.When thefireplaceis not in useswitchoff andunplug.
SAFETYCUT-OFF
lThis applianceis fittedwith asafetycut-offwhichwill operateifthefireplaceoverheats(eg.Due
toblockedairvents). Forsafetyreasons, thefireplacewill NOT automaticallyreset.
lToresettheappliance,disconnecttheappliancefromthemainsupplyforatleast10 minutes.
Reconnectthesupplytothemainand switchontheappliance.

14
REMOTE CONTROL OPERATION
For remotetofunctionmakesure theheateris pluggedinandmainpower switchlocatedonthe
bottom left handsideis at position I.
Whenoperating theremotemakesureyoupointtheremotetothecentreofthefireplaceand make
sure eachtimeyoupress thebuttonthebuzzerinsidetheunit will beeponce.Ittakessome time for
thereceiver torespondtothetransmitter.DonotPRESS thebuttons morethanoncewithin two
seconds for correctoperation.
Power on button:Thepower-onbuttonattopleftcorner oftheremoteis themainON/OFF
power button.This will turn off all thefunctionsand thefireplacewill bein standbymode.
DISPLAY ON/OFF button:Switching thefireplaceflame andtraylightON/OFF.Ithas functions of
setting memory.
DISPLAY RED button:Adjustthered colorbrightness offlameandtray.
DISPLAY YELLOW button:Adjusttheyellowcolor brightness offlameand tray.
DISPLAY ORANGEbutton:Adjusttheorangecolor brightness offlame andtray.
MOOD LIGHT ON/OFF button:Switching thetop light ON/OFF.
ADJUST button:Switching thecolorofthetoplight.
FLASH button:Switchesthemood light into flashmode,this cycles through all top light colors.
HEATERON/OFF button:Switchingtheheater ON/OFF.Ithas functions ofsetting memory.
HIGHT button:Press thehigh buttontoswitchtheheater tohigh heat setting 1465W.
LOW button:Press thelowbuttontoswitchtheheater to low heatsetting750W.
TEMP.button:Press theTEMP.buttontoswitchtheheatertoAUTOmode.Under this modethe
heater will operatein similar wayas explainedabovefor themanual operation.
HEATER ON/OFF
HIGH LOW TEMP.
YELLOW
RED
DISPLAY
DISPLAY ON/OFF
ORANGE
FLASHADJUST
MOOD LIGHT
ON/OFF
+
--
+

15
INSTALLINGWALL THERMOSTAT
WALL THERMOSTATWIRING DIAGRAMS
NOTE:THEWALL THERMOSTATWILL WOKINGWHENTHEHEATERONTEMP.SETTING.PLEASE
REEFERTOTHEMANUALCONTROLAND THEREMOTECONTROL.
Wirethewallthermostat prior toinstallingthefireplace.
WALL THERMOSTATWIRING(24AWG)
Install Wall Thermostat per instructionsprovided withkitandperthefollowinginformation:
1. Turn off circuitbreaker.
2. Removecoverplatelocatedontheleftup sideofappliance.
3. Pull thewire outandcuttheinsidethermostat.Connectthewirestothewall thermostatas
shownbelow.Followinstructionsprovidedwith wall switchkit.

16
REPLACEMENTPARTS
NO PARTNUMBER DESCRIPTION QTY.
1 TOPPANEL 1
2 BACK TOPPANEL 1
3 601097B CIRCUITBOARD 1
4 602067D BLOWERAND HEATERASSEMBLY 1
5 3056001 FIREPLACE BOX 1
6 TOPLEDSTRIP 1
7 10104010 TOPLEDBRACKET 1
6 601036 CONTROL PANEL 1
7 301506 REMOTE RECEIVER 1
8 10103007 POWERCORD 1
9 10104002 SWITCH 1
10
11
3056505 FLICKERASSEMBLY1
12
601144 FLAMELEDSTRIP 1
13
601144 TRAYLEDSTRIP 1
14
3056506 FLICKERASSEMBLYTRAY 1
15
BACK GLASS 1
16
10702150 BOTTOM GLASS 1
17
10702150 TRAY GLASS 2
18
FRONTFLATGLASS 1
10105063B REMOTE 1
10125025
10701200C
10701164

17
EXPLODEDVIEW

18
TROUBLESHOOTING
PROBLEMPOSSIBLECAUSE SOLUTION
FlameLED’sareburntout InspecttheLED’sand replacethemif
necessary.
Dim orno flame
Backblackcloth is fallingoff
and rolltheflicker Changeanewflickerand backblack cloth.
Emberbedis not
glowingordimming EmberLED’sare burnt out InspecttheemberbedLED’sand replacethemifnecessary.
Appliancehasoverheatedand
safetydevicehascausedthe
thermal switchtodisconnect
Turnoffthemainswitch,allow
appliancetocoolfor10minutes, then
turn iton.
Housecircuitbreakerhas
tripped Reset housecircuitbreaker.
Applianceturnsoffand
will not turnon
Appliance’sfusehasblown Replacethefuse.
Applianceis notpluggedintoan
electrical outlet Checkplugandplugin.
Appliancehasoverheatedand
safetydevicehascausedthe
thermal switchtodisconnect
Turnoffthemainswitch,allow
appliancetocoolfor10minutes, then
turn iton.
Appliancewill notcome
onwhenswitchis
flipped to ON
Circuitboardis burntout Inspectthecircuitboardandreplace
it ifnecessary.
No warmaircomingout
of appliance Heateris burnt out Inspecttheburnerand heater assemblyandreplaceitif necessary.
Flamesputters Flamemotoris defective. Call aqualifiedservicetechnicianand
replaceflamemotor.
RemoteControldoes
not work. Lowbatteries. Unitswitch in “O”position. ReplaceAAA batteriesinremote control.
Turn theswitchin “I”position.
Flameis fixed. Wiringmaybelooseorthe
flamemotormaybedefective.

19
SERVICE HISTORY
This heatermustbeserviced annuallydependingonusage.
DateDealer
Name Servicetechnician Name ServicePerformed Special Concerns
NOTES:

20