Amart Furniture 73830 User manual

Imported by Amart Furniture Pty Ltd, ,Brisbane, Qld, Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
ASSEMBLY INSTRUCTION
Valdis Buffet
ITEM CODE 73830
Imported by Amart Furniture Pty Ltd, Brisbane,Qld, Australia.
For any assistance with assembly or for missing parts please
phone Amart Furniture , Customer Service Free call 1800 351
084
1ITEM CODE 73830
750mm

PRE-ASSEMBLY PREPARATION
Before you start:
1.Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the
product
2.Take care when lifting. Product should be assembled as near as possible to the point of
use
3.Ensure that you have all required contents for complete assembly
4.Always read the assembly instructions carefully before beginning assembly.
5.Keep all hardware parts and packaging out of reach of small children.
6.Do not over tighten the screws and bolts as this may damage the threads
2 ITEM CODE 73830
We recommend using a
screwdriver to put this item
together. However if you choose
to use a power drill it must be
used on LOW SPEED (LOW
TORQUE) as too much pressure
could damage the product
ALLOW 60 MINITES 2 PEOPLE REQUIRED

3ITEM CODE 73830
PARTS LIST
1
Door Handle
2
Support Bar
3
Top Board
4
Side Board
5
Side Board
6
Bottom Board
7
Middle Board
8
Left Shelf
9
Right Shelf
10
Back Board
11
Left Door
12
Right Door
13
Frame
14
Frame
1
2
3
4
6
10
7
11
12
13
14
X6
X4
8
9
5
10
11
12

I.
ITEM CODE 738304
A. Ø15X12mm
AX14 BX14 CX20
C. Ø8X40
DX6
D. M5X50
FX40
F. M3.5X15 G. M4*14
GX28
E. M3.5*16mm
EX8
H.
HX8
M. M6X15mm
MX16
N.
IX4
J.
JX4
K.
KX4
L.
LX4
O.
OX1
P. L 1496mm
PX1
B. M6X39mm

ITEM CODE 738305
STEP:1
STEP:2
CX8
C. Ø8X40
B. M6X34mm
BX4
C
B
B
4
5
4
5
Insert dowel（C）to side board（4、5）
Fix cam pin（B）to side board（4、5）

ITEM CODE 738306
STEP:3
STEP:4
CX12
C. Ø8X40
BX4
C
B
B. M6X39mm
B
7
8
9
7
7
Insert dowel （C）to shelf board（8、9）
and middle board（7）
Fix cam pin（B）to middle board（7）

ITEM CODE 738307
STEP:5
STEP:6
A. Ø15X12mm
AX4
A. Ø15X12mm
AX4
A
A
A
A
7
8
9
7
8
9
4
5
Attach shelf board (8)(9) to middle board (7) with the cam locks(A)
Attach side board (4)(5) to shelf board (8)(9) with the cam locks(A)

ITEM CODE 738308
STEP:7
STEP:8
I.
E. M3.5*16mm
EX8 IX4
BX6
E
I!
B
B. M6X39mm
B
3
3
Fix door catch (I) to top board (3) with
screw (E)
Fix cam pin（B）to top board（3）

ITEM CODE 738309
STEP:9
STEP:10
A. Ø15X12mm
AX6
DX6
D. M5X50
A
D
A
D
7
8
9
4
5
7
8
9
4
5
3
3
6
Attach top board (3) to the body with cam locks (A)
Attach bottom board (6) to the body with screws (D)

ITEM CODE 7383010
STEP:11
STEP:12
O.
OX1
M. M6X15mm
MX4
O
O.
OX1
M. M6X15mm
MX6
O
M7
8
9
4
5
3
6
4
5
3
6
2
13
2
2
2
2
2
7
8
9
M
O
Fix support bar (2) to frame (13) with
bolt (M)
Attach frame (13) to bottom board (6)
with bolt (M)
13

ITEM CODE 7383011
STEP:13
STEP:14
P
!
!
O.
OX1
M. M6X15mm
MX6
P. L 1496mm
PX1
M
O
O
7
9
4
5
3
6
8
14
10
10
Attach frame (14) to the body with bolt (M)
Join back board (10) withfiller(P).
13

ITEM CODE 7383012
STEP:15
STEP:16
G. M4*14
GX28
G
FX8
F. M3.5X15 J.
JX4
F
J
10
10
4
5
11
12
11
12
Fix stopper (J) to door board (11)(12)
with screws (F)
Attach back board (10) to the body with screws (G)

ITEM CODE 7383013
STEP:17
STEP:18
K.
KX4
L.
LX4 FX16
F. M3.5X15
K
F
L
F
K
!
!L
!
H.
HX8
H
K
L
11
12
11
12
11
12
11
12
1
1
1
1
K
K
Fix hinge (K)(L) to door board
(11)(12) with screws (F)
Fix handle (1) to door board (11)(12) with screws (H)

ITEM CODE 7383014
STEP:19
FX16
F. M3.5X15
FL
L
K
K
!
!
L
K
F
4
5
3
11
12
11
12
11
12
11
12
3
5
4
Attach door (11)(12) to the body with screws (F)

ITEM CODE 7383015
ASSEMBLY COMPLETE

16 TEM ICODE 73830
SAFETY BRACKETS INSTRUCTIONS
1. Attach one Mounting Plate to the wall with the Large Screws. Make sure to attach
the Mounting Plate into a stud. If mounting into brick or masonry you will need to
acquire wall anchors.
2. Attach the second Mounting Plate to the furniture frame with the Short Screws.
3. Move the furniture to its final position. Thread a Wall Strap through the both
Mounting Plates and tighten until snug. Do not over tighten.
4. Make sure that the Mounting Plates are firmly attached to the wall and furniture
and that the Wall Strap is snug.
HARDWARE
Mounting Plate x 2 Wall Strap x 1 Large Screw x2 Small Screw x2

17
To protect your furniture, we suggest the following:
•Avoid placing your furniture in direct sunlight.
•Do not place furniture directly under windows.
•Do not place sharp materials (knife, fork, etc.) directly onto your
furniture as sharp material may scrape and damage the finish.
•Do not place material with high temperature directly onto the
surface of your furniture.
•Clean up spills quickly. Water left over a prolonged period of
time may cause damage. Alcohol, perfume, nail polishes,
aftershave and some medication may cause severe finish
damage if not cleaned immediately.
•Use a clean, soft, dry, lint free absorbent cloth to clean your
furniture. Do not use any detergent as they may contain
ingredients that may react and damage the finish.
TEM ICODE 73830