AmazonBasics B07NR49JZ1 User manual

Gaming Office Chair, Racing Design
Fauteuil de Jeu, Design de Course
Gaming-Schreibtischsessel, Racing-Design
Sedia da Ufficio da Gioco, Design da Corsa
Silla de Oficina para Juegos, Diseño de Carreras
B07NR49JZ1, B07NR2M28Y, B07NR2JW7F, B07NR2M291, B07NR3FZJS

English ��������������������������������������������������� 3
Français ����������������������������������������������� 13
Deutsch������������������������������������������������ 23
Italiano������������������������������������������������� 33
Español������������������������������������������������ 43

3
Welcome Guide • English
Contents:
Before getting started, ensure the package contains the following components:
Ax1 JM6 x 30 mm
x4
Bx1 KM6 x 38 mm x2
Cx1 LM5 x 14 mm x2
Dx1 Mx1
Ex1 Nx1
Fx1 Ox4
Gx5 Px4
H
M8 x 20 mm
x4 Qx1
I
M8 x 30 mm
x4 Rx1
NOTICE
The small parts are stored in the folded air lift cover (Q).

4
IMPORTANT SAFEGUARDS
Read these instructions carefully and retain them for future use. If this product is passed to a third party, then
these instructions must be included.
When using the product, basic safety precautions should always be followed to reduce the risk of injury including the
following:
• For domestic and office use only.
• The castors are suitable for carpet floors. Use a suitable base on sensitive or hard floors.
• Always use on firm level ground.
• Do not stand on the seat.
• Do not sit on the armrest.
• Do not let children play with this product.
Before First Use
• Check for transport damages.
DANGER Risk of suffocation! Keep any packaging materials away from children – these materials are a
potential source of danger, e.g. suffocation.
Assembly
Step 1:
3
2
1
Q
E
F
G
NOTICE
The castors (G) can move freely when you sit on the chair. When you stand up, the castors will be
locked automatically.

5
Assembly
Step 2:
H
D
R
B
(Front)
Step 3:
K J
C
C

6
Assembly
Step 4:
Step 5:
I P O
A

7
Assembly
Step 6:
L
M
L
N
Operation
Tilt tension:
Turn the knob clockwise/counter-clockwise to reduce/increase the tilt tension.

8
Pull out/push in the handle to unlock/lock the tilt when seated upright.
Operation
Adjust the backrest angle:
2
1
• Pull up the handle as shown.
• Lean back or forward to the intended position.
• Release the handle.

9
Operation
Lift up/down:
2
1
Adjust the armrests:
2
1

10
Operation
Adjust lumbar support:
• Pull the straps at the back up or down.
Remove/replace the cushions:
• Open the locks at the back and remove the cushions from the front.
• Replace the cushions in the reverse order.