AmazonBasics B07V8X5W5R User manual
8-Piece Wood Carving Chisel Set
Jeu de Ciseaux à Bois de 8Pièces
8-teiliges Holzschnitz-Meißel-Set
Set di Scalpelli per Intaglio Legno 8Pezzi
Juego de Cinceles para Tallar Madera, 8Piezas
8-Delige Houtbeitelset
木彫のみセット 8 本セット
B07V8X5W5R
English . . . . . . . . . . . . . . . . . . . . . . . 3
Français . . . . . . . . . . . . . . . . . . . . . 12
Deutsch . . . . . . . . . . . . . . . . . . . . . 22
Italiano . . . . . . . . . . . . . . . . . . . . . . 32
Español . . . . . . . . . . . . . . . . . . . . . 42
Nederlands . . . . . . . . . . . . . . . . . . 51
日本語 . . . . . . . . . . . . . . . . . . . . . . . 61
EN
3
Table of Contents
1. Important Safeguards ����������������������������������������������������������� 4
2. Intended Use ������������������������������������������������������������������������� 5
3. Before First Use �������������������������������������������������������������������� 6
4. Tool Overview ������������������������������������������������������������������������ 6
5. Operation ������������������������������������������������������������������������������ 7
6. Cleaning and Maintenance ��������������������������������������������������� 8
6�1 De-rusting and rust protection ������������������������������������� 8
6�2 Sharpening ������������������������������������������������������������������ 8
6�3 Storage ��������������������������������������������������������������������� 10
7. Specifications ��������������������������������������������������������������������� 11
8. Feedback and Help ����������������������������������������������������������� 11
EN
4
1. Important Safeguards
Read these instructions carefully and retain them for
future use� If this tool is passed to a third party, then these
instructions must be included�
When using the tool, basic safety precautions should always be
followed to reduce the risk of injury including the following:
CAUTION Risk of injury!
»Never work in your direction� Slipping of the tool can cause
serious injuries�
CAUTION Risk of cuts!
»Parts of this tool are are extremely sharp� Care must be taken
at all times when handling them� To avoid injury the tool should
always be held with two hands� One hand should be placed on
the handle itself and the other nearer the blade, actually guiding
it�
»This tool is not a toy� Children must always be supervised by an
adult when using the tool�
»Remain alert and use good judgment when using this tool� Do
not use this tool if you are in any way impaired by medications,
alcohol, drugs or fatigue�
»Dress appropriately and remove all jewelry, secure loose clothing
and tie up long hair before using this tool�
»There is a risk of splintering and dust formation during
woodworking� Wear appropriate protective clothing (e�g� work
gloves, dust mask, safety glasses, etc�)�
EN
5
»Parts of this tool have sharp edges and corners� Always be
careful while handling it�
»Keep the cutting edge sharp ensure a secure and proper
working�
»Always check the workpiece for any metal (nails, screws,
staples, etc�) that could damage the cutting edge�
»Make sure that the workpiece is clamped or otherwise held
securely�
»Do not modify the tool in any way unless instructed to by this
user manual�
»Do not use any chisel that is bent or shows dents, cracks, chips
or excessive wave�
»Do not use if handles are broken or splinted�
»Do not use chisels as a pry or a wedge�
»Do not use chisels with chipped edge� Sharpen with stone
supplied�
»Do not use a grinder to sharpen the chisels� Sharpen with stone
supplied�
2. Intended Use
»This tool is intended for woodworking, mainly for chiseling into
wooden surfaces�
»This tool is intended for household use only� It is not intended for
commercial use�
»No liability will be accepted for damages resulting from improper
use or non-compliance with these instructions�
EN
6
3. Before First Use
DANGER Risk of suffocation!
»Keep any packaging materials away from children – these
materials are a potential source of danger, e�g� suffocation�
»Check the tool for transport damages�
»Remove all the packing materials�
»Make sure the cutting edge (C) is sharp before use� Sharpen the
blade if necessary (see section “Sharpening”)�
4. Tool Overview
A
B
C
D
G
E
F
Chisel
Honing guide
EN
7
AHandle
BBevel
CCutting edge (with a tip cover)
DPlane blade intake
EWidth adjustment screw
FCastor
GChisel intake
HSharpening stone (#120/240 grain, not shown)
5. Operation
CAUTION Risk of injury
The edges and corners of the chisel are very sharp� When placing
it aside, always lay it down with the bevel (B) facing up�
CAUTION Risk of injury and tool damage!
Do not use hard-steel hammers and/or with sharp edges and
corners�
»Choose an suitable chisel� The narrower the chisel, the less
force is required�
»Depending of the material of the workpiece, you may have to
change the angle of the cutting edge (see “Sharpening”)�
»Remove material from the workpiece by advancing the cutting
edge (C) into it�
EN
8
»It is recommended to prepare a little grove before the actual
work� This way the cutting edge cannot slip away when using
more force�
»After the work is finished, always put the tip cover on the cutting
edge (C)�
6. Cleaning and Maintenance
6.1 De-rusting and rust protection
»Use commercially available rust cleaner or citrus cleaner� Wear
gloves and follow manufacture’s cleaning instructions�
»Spray the metal components� Let them stand for several
minutes then, using steel wool, brass brush or toothbrush,
scrub off as much of the rust as you can�
»To prevent the metal parts from rusting, keep them lubricated
with a commercially available lubrication solution�
NOTICE Some lubrication solutions may interact with the
wood what may affect the look of the wood� Ask your dealer for
an accurate lubrication solution�
6.2 Sharpening
If the cutting edge (C) is blunt, primely sharpen it on the #120grain
(darker gray) side of the sharpening stone (H)� Do the precision
sharpening on the #240grain (brighter gray)�
Lubricate the sharpening stone with oil�
EN
9
Use the honing guide to ensure an accurate sharpening angle of the
cutting edge (C)�
25-30°
1� Turn the width adjustment screw (E) of the honing guide in anti-
clockwise direction to widen the intake (D, G)�
2� Place the chisel with the bevel (B) facing down in the chisel
intake (G)� Turn the width adjustment screw (E) in clockwise
direction to lock the chisel in place� Depending on how much
the chisel protrudes from the chisel intake (G), the cutting edge
angle of the chisel will be adjusted accordingly�
For chisel intake (G)
Protruding Angle Suitable for
30 mm 30° Softer wood
40 mm 25° Harder wood
EN
10
For plane blade* intake (D)
Protruding Angle Suitable for
38 mm 30° Softer wood
50 mm 25° Harder wood
3� Pull the chisel in the honing guide backwards to sharpen the
cutting edge (C)� Press the castor and the cutting edge onto the
sharpening stone (H)� Repeat until sharpened�
4� Draw the sharpened cutting edge (C) across the corner of a
scrap piece of wood to remove burr�
* The plane blade is not provided�
NOTICE Dry the blade and protect against rust� A freshly
honed surface, if wet or moist, can show the first signs of rust
within a matter of minutes� Dry the surface immediately with a
clean, absorbent cleaning rag� Then apply a thin layer of oil as rust
protection�
6.3 Storage
»Always store chisels with the tip cover in place�
»Store in a cool and dry place away from children and pets in the
provided case�
EN
11
7. Specifications
Chisel widths:
1-1/2", 1-1/4", 1”, 3/4", 1/2", 1/4"
(38 mm, 32 mm, 25 mm,
19 mm, 13 mm, 6 mm)
Chisel material: Cr-V (Chrome-Vanadium)
Net weight (complete
case): approx� 5�5 lbs (2�48 kg)
Dimensions (W x H x D)
(complete case):
approx� 9�6 x 3 x 11�4"
(245 x 75 x 290 mm)
8. Feedback and Help
Love it? Hate it? Let us know with a customer review�
AmazonBasics is committed to delivering customer-driven products
that live up to your high standards� We encourage you to write a
review sharing your experiences with the tool�
US: amazon.com/review/review‑your‑purchases#
UK: amazon.co.uk/review/review‑your‑purchases#
US: amazon.com/gp/help/customer/contact‑us
UK: amazon.co.uk/gp/help/customer/contact‑us
amazon.com/AmazonBasics
V01-05/20
MADE IN CHINA
FABRIQUÉ EN CHINE
HERGESTELLT IN CHINA
PRODOTTO IN CINA
HECHO EN CHINA
GEMAAKT IN CHINA
中国製
Table of contents
Other AmazonBasics Power Tools manuals
