AMP Lighting AAL-1045-B-BK Operating and safety instructions

INSTALLATION & MAINTENANCE GUIDE
Help Hotline:
1-813-978-3900 • Mon-Fri 9am-6pm (EST)
www.amplighting.com
AMP®Low Voltage Landscape Lighting
AMP® Lanai Light Brass Black
AAL-1045-B-BK

AMP®Lanai Light Brass Black
AAL-1045-B-BK
INSTALLATION & MAINTENANCE GUIDE
www.amplighting.com
–2–
Important Safety Instructions: Read Before Installation
!
Important Safety Instructions
!
This luminaire is intended for installation in accordance with local codes
and the National Electric Code (NEC). Failure to adhere to these codes and
instructions may result in serious injury, property damage and void the
warranty.
These instructions do not intend to cover all variations in installation, oper-
ation maintenance or mounting situation.
1. Make sure the power is turned OFF before installing or servicing this
luminaire.
2. WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M)
or more from pool, spa or fountain.
3. This luminaire is intended to be used at 12V/AC.
4. Wiring connections must be made with UL listed wire connectors that
are suitable for outdoor use.
5. Position the low voltage wire and UL listed wire connector so that it is
located within 6 inches (15.2 cm) from a building structure, a lumi-
naire or tting.
6. The main low voltage cable is intended for shallow burial - less than 6
inches (152 mm).
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS
Lighted lamp is HOT!
WARNING – TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS.
1. Lamp gets HOT quickly!
2. Do not touch the hot lens, guard or enclosure.
3. Keep lamp away from materials that may burn.
4. Do not touch lamp at any time. Use a soft cloth. Oil from skin may dam-
age lamp.
5. Do not operate the luminaire tting with a missing or damaged shield.
SAVE THESE INSTRUCTIONS

[email protected] • 813.978.3900
–3–
Package Contents
A. (1) Fixture
B. (3) Screws
C. (3) Wall Anchors
Product Dimensions
Parts Required (Sold Separately)
A. (1) MR11 Bulb
1.62”
1.85”
1.62”
10”
3.27”

INSTALLATION & MAINTENANCE GUIDE
–4–
www.amplighting.com
–4–
2
1
AMP®Lanai Light Brass Black
AAL-1045-B-BK
Remove Lens from Fixture
Remove the lens from the xture
body by rotating the lens count-
er-clockwise.
Lens
Fixture Body
Install Fixture Body
Place the xture wires through the
cut out of the backplate.
Attach the backplate onto the
desired location and mark the three
points on the wall surface. Drill a
hole using the marks and insert the
wall anchor.
Place the backplate onto the wall
surface and secure by threading
screws into wall anchors. Tighten
with a screwdriver.
NOTE: This xture can be oriented
upwards or downwards.
Fixture Body
Wall Anchor
Backplate
WALL
Screw
Mark
Cut out
Fixture Wires

[email protected] • 813.978.3900
–5–
INSTALLATION & MAINTENANCE GUIDE
3
4
AMP®Lanai Light Brass Black
AAL-1045-B-BK
Install MR11 Bulb
Socket
Insert the MR11 bulb with the
correct wattage and type marked
on the xture label.
CAUTION: Do not exceed maxi-
mum wattage marked on lumi-
naire label.
MR11 Bulb
Install Lens
Lens
Fixture Body
Install the lens to the xture
body by rotating clockwise.

INSTALLATION & MAINTENANCE GUIDE
–6–
www.amplighting.com
–6–
5
AMP®PinnaclePro Spotlight
AAL-1018-4-X-XX
Wire Connections
Strip both leads from the xture wires. Using two UL listed wire con-
nectors (sold separately), connect the leads from the xture wires to
the main supply cable leads.
Main Supply Cable
Fixture Wires
Wire Connectors

–6––6–
[email protected] • 813.978.3900
–7–

IS-AAL-1045-B-BK-ver1.pdf
Specications and product details subject to change without notice.
© Copyright 2022, AMP®Lighting, Lutz FL USA 33549 • All rights reserved.
[email protected] • 813.978.3900
Help Hotline:
1-813-978-3900 • Mon-Fri 9am-6pm (EST)
www.amplighting.com