AMSEC SafeWizard II User manual

SafeWizard II
Quick Reference
AMERICAN SECURITY PRODUCTS CO.
11925 Pacic Ave., Fontana, CA 92337
951-685-9680
www.amsecusa.com
Part #4305378 Revised 06/17
For the complete SafeWizard II Operating Instruction Manual, go to:
http://amsec.fyi/sw2

Log In
First Time Log In for PIN Only Users
ThePinOnlyUserCodeisaneightdigitnumber;thersttwodigitsaretheuser
IDnumber,inexample,user01,followedbythesixdigitpinnumber,factory
preprogrammedas1,1,1,1,1,1.Thesystemwillpromptforachangeofthispin
numberatyourrstlogin.
1. StartbyenteringtheUser2-digitIDNumber,followedbythefactoryPIN
1,1,1,1,1,1.PressENTER/SAVE.
2. Screenwilldisplayaprompttochangeyourpin,pressEntertochangethePin.
Enteryournew6-digitPIN.PressENTER/SAVE.
3. Screenwilldisplay“ConrmNewPIN”,entersame6digits.PressENTER/SAVE.
4. ScreenwillthenreverttotheMainMenu,andyourPinhasnowbeenchanged.
Aftertherstloginiscompleteandthefactoryuserpinhasbeenchangedtoa
personalpin,futureloginwillonlyrequirethe2-digitUserIDfollowedbythe6-digit
personalpintoaccesstheMainMenu.
For Key Users: First Time Log In with KEY and PIN
TheKeyreplacesthe2-digituserIDwhenenteringyourPINCode.
1. PresentKeytothereaderport.
2. EnterfactoryPIN1,1,1,1,1,1,andfollowsameinstructionsasabovetochange
thefactoryPin.Oncecomplete,futureloginwillonlyrequirepresentingyourkey
rstandenteringthe6-digitpersonalpintoaccessthemainmenu.
SafeWizardII Controller
On/O Switch
Slide Right - OFF
Slide Left - ON
Turning the safe On/O

To Open Doors
1.LogIntoaccessmainmenu
2.Pressthesoftgreykeybelowthe“OpenDoor#”desired.
2a.(Optional)Press1forDoors,thenpresstheDoor#desiredandpressEnter.If
authorizedtoopendoors,accesswillbegranted.
If a door is programmed with Time Delay:
1. FollowthesamestepsasabovetologinandaccessDoorsMenu.
2. Ifthedoorselectedhastimedelay,waitfortheTimeDelaycountertoreachthe
presetvaluecountingup.
4. Thescreenwilldisplay“LogintoOpen”withacountdownofthetimetoLogin
again.ProceedwithLoginbeforethetimerexpiresandopendoor.
Changing PIN
1. Login.
2. Press3-Admin.
3. Press5-ChangeYourPin.Enteryourold6-digitPin,pressEnter
4. Enteranew6-digitPIN.
5. Enterthesame6digitstoconrm,pressEnter.
Thescreenwillrevertbacktothemenu,yourpinhasbeenchanged.
Adding Users (Restricted to Authorized User Levels)
1. Login.
2. Press3-Admin.
3. Press1-UserManagement
4. Press1-AddNewUser
5. SelectValidationMode,PinOnly,KeyOnly,orKeyandPin.
 *IfPinOnly,payattentiontothe2-digitI.D.number.Thatwillberequiredalong
withthe6-digitPINnumber.
 *IfaddingaUserwithakey,presentkey
6. EnterUser’sname,pressEnterwhennished.

Adding Users (Restricted to Authorized User Levels)
7. SelectUserProlebypressing1,thenthe“<or>greysoft-keys”tochooseproles
(i.e.Cashier,Manager,etc.).PressEnter/SaveKey.
8 Ifapplicable,selectanydoorpermissions,i.e.,OpenSafeDoorsandAuthorize
TimeDelayBypass.Pressthelistnumberassociatedwiththeapplicablesubmenu
desiredtoaccessthepermissionsandpressYes/Nobuttonperdesiredselection.
9. HitEntertoexitthemenu,save,andnallyentertoconrminformationand
successfullyaddtheuser.
Deleting Users (Restricted to Authorized User Levels)
1. Login.
2. Press3-Admin.
3. Press1-UserManagement
4. Press3-DeleteUser
5. SelectUserbypressingthelistnumber(note,theuserIDnumberisadjacentto
therightofthelistnumber,youmustchoosethelistnumberintheorderthat
itappearstoselectthecorrectuser).Youcanpressthe“<or>greysoft-keysto
accessadditionalusersinthelist.
6. Onceuserisselected,Press“greysoft-key”underYEStodeletethatUser.
Aconrmationwillappear.