AMX MODERO NXT-CA12 User instructions

TOLERANCE ON HOLE DIAMETERS:
ANGLES: +/- 1.0°
ALLDIMENSIONSININCHES.
DO NOT SCALE THIS DRAWING.
UNLESS OTHERWISE SPECIFIED:
TOLERANCE ON DECIMAL DIMENSIONS: XX = .010
FRACTIONAL DIMENSIONS INCLUDING HOLES: +/- 1/64
SURFACEFLATNESS.003TIRPERLINEARINCH.
written permission.
NOTICE: This drawing is the
property of AMX Corporation.
that is not generally known
shall be confidential except
to the extent the information
has been previously established.
This drawing may not be copied,
for manufacture or sale without
reproduced, or used as the basis
All information contained herein
SHEET
PROJECTION
MATL SUP
QUALITY REV.DWG.NO.SIZE
REVAPPRRELDATE
DRAWN
ENGR SERV
PROD ENGR
ENGINEER
THIRDANGLE
RELAPPR
= +/- .005UNDER.250ú
.250 TO .500
OVER .500
XXX = .005
= +.006 -.005
= +.008 -.005
DSCALE:
APPROVEDDATEREV ECN DESCRIPTION
REVISIONS
A4253 RELEASE TO PRODUCTION 10/14/02
PICTORIAL
NXT-CV12, AND NXT-CA12, MODERO 12.1"
COLOR ACTIVE TILT
95-2250-11
95225011A A
1/2
1 OF 1
J.L. 09-30-02
JM 10/11/02
PL 10/11/02
MAS 10/11/02
MP 10/11/02
AVT 10/11/02
NXD-CA12
NXD-CV12