AMX NXD-CA15 User instructions

TOLERANCE ON HOLE DIAMETERS:
ANGLES: +/- 1.0°
ALLDIMENSIONSININCHES.
DO NOT SCALE THIS DRAWING.
UNLESS OTHERWISE SPECIFIED:
TOLERANCE ON DECIMAL DIMENSIONS: XX = .010
FRACTIONAL DIMENSIONS INCLUDING HOLES: +/- 1/64
SURFACEFLATNESS.003TIRPERLINEARINCH.
written permission.
NOTICE: This drawing is the
property of AMX Corporation.
that is not generally known
shall be confidential except
to the extent the information
has been previously established.
This drawing may not be copied,
for manufacture or sale without
reproduced, or used as the basis
All information contained herein
SHEET
PROJECTION
MATL SUP
QUALITY REV.DWG.NO.SIZE
REVAPPRRELDATE
DRAWN
ENGR SERV
PROD ENGR
ENGINEER
THIRDANGLE
RELAPPR
= +/- .005UNDER.250ú
.250 TO .500
OVER .500
XXX = .005
= +.006 -.005
= +.008 -.005
DSCALE:
APPROVEDDATEREV ECN DESCRIPTION
REVISIONS
A4253 RELEASED TO PRODUCTION 10/14/02
PICTORIAL
NXD-CV15, AND NXD-CA15, MODERO 15"
15" COLOR ACTIVE WALL
95-2253-12
95-2253-12_nxd-ca15_pictorial B
1/2
1 OF 1
J.L. 10/1/02
JM 10/11/02
JSV 10/11/02
MAS 10/11/02
MP 10/11/02
AVT 10/11/02
WALL
WALLWALL
NXD-CV15
NXD-CA15
B4333 REVISED DRYWALL MOUNTING 10/28/02
DB
RDR
MAS
JS
AK