Ancheer E-bike User manual
E-bike User’s Manual
CAUTION READ THIS MANUAL BEFORE USING YOUR EQUIPMENT
CONTANTS
Safety instruction--------------------------------------------------------------------------------------------------------
General Information----------------------------------------------------------------------------------------------------
Meter operation----------------------------------------------------------------------------------------------------------
Battery: Further information and maintenance-------------------------------------------------------------------
Charging-------------------------------------------------------------------------------------------------------------------
Installation Instruction--------------------------------------------------------------------------------------------------
Warranty -------------------------------------------------------------------------------------------------------------------
1. Safety Instruction ___
We thank you for choosing our product. To ensure your safety and health, please use
this equipment correctly. It is important to read this entire manual before assembling and
using the equipment. Safe and effective use can only be assured if the equipment is
assembled, maintained, and used properly. It is your responsibility to ensure that all
users of the equipment are informed of all warnings and precautions. Before each ride,
especially if you may travel a long distance, inspect your e-bike.
IMPORTANT:
● Check the tires for proper inflation and cracks on the walls of the tires. Keeping the
tires properly inflated and maintained will help prevent flats and damage.
●Check all cables and cable housings for fraying, breaks, rust, or corrosion and replace
if necessary.
●Inspect the brakes to make sure that both are working properly. Additionally, check the
brake pads for any damage as they will wear over time and eventually need
replacement.
●Please check all nuts and bolts are taut and properly fastened to prevent injury and
unnecessary wear and tear on your e-bike.
This manual is intended as a general guide to your new ACNHEER e-bike and not a
comprehensive reference guide. For technical support, including service, maintenance,
and repair information, please
General Information
1. About The ANCHEER Electric Bike
ANCHEER electric bike is a leading icon of e-bikes. For years, ANCHEER has been not only
dedicating to innovation, cutting-edge technology and high-quality materials, but also
providing cost effective e-bikes, to satisfy riders' various needs of transportation and even
desire of exploring sports & outdoors life. Just ride freely with ANCHEER!
2. What’s In the Box (Parts List)
Description
Quantity
ANCHEER Electric Bike
1
Assembly Packet
1
User Manual
1
Charging Adapter
1
Battery
1
Pedal
2
Reflector
1
Meter operation
1. Meter instruction
2. Meter operation
3. Operation Cautions
Be careful of the safety use. Don’t attempt to release the connector when charging the
battery.
● Avoid the risk of collision.
● Don’t modify system parameters to avoid parameters disorder.
● Make the display repaired when error code appears.
Operating instructions
To switch on/off
the E-Bike
system, hold
the
button for
2s. The default
value is “low”
pedal assist
level.
Press “+” to
crease into
pedal assist
level “Mid”.
Press “+” again
to move into
pedal assist
level “High”.
“High” is the
maximum
power of PAS.
Full Electric
Function (Pure
electric mode):
Press”-“, until
all the three
“low””Mid””Hig
h” indicators
are off.
Battery: further information and maintenance
●How far full charge battery can go? That depends on the loading weight, road condition
and battery capacity. But in the same condition, average speeds can continuous longer
travel range.
●When storing the battery for a longer time period, (during winter time) it is important to
place the fully charged battery on a flat surface in a dry place.
●Attention: The battery should be re-charged once every 2-3 month when it is not used.
Warning:
●Keep the battery out of reach for children.
●Never try to open the battery.
● If the battery is damaged because it has been dropped somewhere or because of a biking
accident, there might be a risk of electrolytes leakage. Beware of chemical burns! And
immediately stop using a damaged battery.
● Do not touch the battery without a cloth or gloves and make sure no acid touches your
eyes.
●Do not store the battery in temperatures above 75°F or below -10°F.
●Do not allow the battery to run down completely before charging. Charge the battery
before storing the product. Leaving the battery in a discharged condition can result in a
battery that will no longer take a charge.
●Charge a new battery for at least 4-6 hours before you use it in your product for the first
time. Never charge the battery too long per time. Overheating or undercharging the battery
may shorten battery life and decrease product run time.
IMPORTANT: Battery Disposal
Battery must be recycled or disposed of in an environmentally sound manner.
Do not dispose of the battery in a fire. The battery may explode or leak.
Do not dispose of a battery in your regular household trash.
Charging
1.To charge the battery with the bike, simply place the bike within reach of the power supply
and plug it in.
2. The battery only can be charged on the bike.
3.The RED light indicates it is in charging and GREEN light indicates the battery is fully
charged. (Please put off plug from wall) Usually the charging time is 4-6 hours depends on
the battery capacity remain.
4.Warning: Charging time over 10 hours is prohibited please kept it away from high
temperature environment and stores it in a cool place.
Warning:
Charging time over 10 hours is prohibited please kept it away from high temperature environment
and stores it in a cool place. Please make sure that the battery charger and charging plug are
always kept dray and never get wet. The charger should only be cleaned with a dry cloth. Never
use a wet cloth, oil or any other liquid.
Installation Instruction
1. When open the bike's carton box, take out E-bike and use tools to cut off the package strings.
2. Install Kickstand
2.1 Unscrew the screw in the kickstand.
2.2 install the kickstand.
2.3 Then tighten with tool.
3. Install Stem and handle bar
3.1 Insert the stem and tighten the screw.
3.2 Using the wench from tool kit to loosen the four screws and put the bike into the stem in balance and you
can adjust the handlebar in a property angel and position
4. Install front wheel
4.1 Take out the front fork protector from the front fork.
(Please note: Front fork protector is used to prevent the forks from being deformed during transport. it belongs to
the packing material. You can just throw away this accessory!)
4.2 Take out the quick release from Wheel and unscrew the bolt from the quick release
4.3 Set front wheel set into front fork. Make sure fork hanger hold onto wheel axle, and make sure the disc
put into middle of brake.
4.4Insert quick-release axle into spring and tighten screw(Quick release nut to be at the same end as the
brake)
5. Install front light
5.1 Screw front light right on front fork holder as shown
6. Install Pedal
6.1There is a right pedal marked “R” and a left pedal marked “L”.
.
6.2 The pedal marked “R” has right-hand threads. Tighten it in a clockwise direction.
The pedal marked “L” has left-hand threads. Tighten it in a counterclockwise direction (anti-clockwise).
Turn the right pedal marked “R” into the right side of the crank arm, and the left pedal marked “L” into the
left side of the crank arm.
Make sure the threads of each pedal are fully into the crank arm.
Make sure pedals are fully tightened with wrench.
☛Note
Be sure to identify R/L letters on pedal’s bolt when you installing.
R
L
7. Install seat tube
7.1Insert seat post into post receiver, set right its position and adjust height to fit your ridding habit
7.2 Tighten seat by clamp.
8. Adjust angle of brake lever, meter, gear shifter, throttle and louder controller on handle
bar, then tightens them with tools.
9. Install battery
9.1 Open the box of battery
9.2 connect the connectors
9.3 Put the battery in bag and lock tighten the belts
Other manuals for E-bike
2
Table of contents
Other Ancheer Scooter manuals
