Anmytek CH004 User manual

ASSEMBLY AND CARE GUIDE
2 x 1 m
FLOOR SPACE REQUIRED
1 PEOPLE
REQUIRED FOR ASSEMBLY
30 MIN
ASSEMBLY TIME
Havana Chair
Item No.: CH004
Contact Us: [email protected]
Contact Us: [email protected]
1

SAFETY PRECAUTIONS
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
WA RNING : ENSURE THE WA LL STRA P IS AT TACHED TO
AVOID SERIOUS INJURY .
To avoid any serious or fatal injury, this product has been fied with a wall strap to
prevent toppling. We strongly recommend that this product is permanently fixed to the
wall or other suitable surface. Fixing devices are not included since different surface
materials require different aachments. Please seek professional advice
if you are in doubt of what fixing device to use.
Do not stand on the product. Do not climb on the product. Do not swing on the product.
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING AND USING THE PRODUCT.
1. Please check that all parts are present before you start the assembly of your furniture. A Philips
head screwdriver (not included) is required for the assembled of thisproduct.
2. For ease and speed of assembly, we recommend that before you commence each step
of the assembly, that you idenfy all the parts required for that step.
3. For larger items, please ensure that you have sufficient space and people to assemble your
product safely.
4. We recommend that, where possible, all items are assembled near to the area in which they
will be placed in use, to avoid moving the product unnecessarily once assembled.
5. For the protecon of your furniture, we recommend that the product is placed on a
protected surface during assembly to prevent any damage.
6. During assembly, Do n ot ti ghten b olts / sc rews completely u ntil al l b olts / sc rews are lined up and
inserted into holes, Do not over tighten screws and bolts to avoid stripping, Do not use power tools
7. Always place the product on a flat, steady and stable surface.
8. Do not stand on the product. Do not use the product as a stepladder.
9. This product is intended for indoor, household
use only as it is a non industrial product.
CARE AND CLEANING
• Please periodically check all fings and re-ghten as necessary.
• To clean your item, please use a damp cloth and wipe clean.
• Never allow any kind of liquid to remain on your furniture. If liquid spills onto the
product, please wipe clean as soon as possible.
Item No.: CH004
Contact Us: [email protected]
Contact Us: [email protected]
2

ASSEMBLY DIAGRAM
AFTER SALES SUPPORT
If you have any general enquiries or require spare parts for this product, please feel free to
contact us via the following email:
Email: [email protected]
You can contact us for support at any time. We'll answer you in 24hrs.
Item No.: CH004
Contact Us: [email protected]
Contact Us: [email protected]
3

The hardware quantities listed above are required for proper assembly.
Some extra hardware may also have been included.
Philips head screwdriver required for assembly
(not included)
Item No.: CH004
Contact Us: [email protected]
Contact Us: [email protected]
4
Allen Key
Bolt
Flat Washer
PARTS
M6x12
φ20x8x1.2
Bolt M6x16

ASSEMBLY STEPS
Item No.: CH004
Contact Us: [email protected]
Contact Us: [email protected]
5
Attach 2 x parts (2) and 2 x parts (3) to part (1) using 8 x bolts (B) with an Allen key (A).
A
B
Step 2
Step 1
Attach the other piece of part (1) to assembled unit using 8 x bolts (B) with an Allenkey (A).

ASSEMBLY STEPS
Item No.: CH004
Contact Us: [email protected]
Contact Us: [email protected]
6
Step 3
Attach the top part (4) to assembled unit using 4 x screws (C) and 4 x flat washers (D) with
Allen Key (A).
Wobbly or unlevel?
Adjust feet until stable!
Step 4
Final assembly.