Anmytek Middle Century Media H0043 User manual

1
ASSEMBLY AND CARE GUIDE
2 x 1 m
FLOOR SPACE REQUIRED
2 PEOPLE
REQUIRED FOR ASSEMBLY
1 HOUR
ASSEMBLY TIME
Item No. : XXXX
Item No. : H0043
Contact Us : [email protected]
Contact Us : [email protected]
M iddle Century M edia
Console TV Stand

CARE AND CLEANING
SAFETY PRECAUTIONS
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING AND USING THE PRODUCT.
2
1.
2.
3.
4.
5.
6.
7.
8.
9.
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
• Please periodically check all fings and re-ghten as necessary.
• To clean your item, please use a damp cloth and wipe clean.
• Never allow any kind of liquid to remain on your furniture. If liquid spills onto the
product, please wipe clean as soon as possible.
WA RNING : ENSURE THE WA LL STRA P IS AT TACHED TO
AVOID SERIOUS INJURY .
To avoid any serious or fatal injury, this product has been fied with a wall strap to
prevent toppling. We strongly recommend that this product is permanently fixed to the
wall or other suitable surface. Fixing devices are not included since different surface
materials require different aachments. Please seek professional advice
if you are in doubt of what fixing device to use.
Do not stand on the product. Do not climb on the product. Do not swing on the product.
Item No. : XXXX
Item No. : H0043
Contact Us : [email protected]
Contact Us : [email protected]
Please check that all parts are present before you start the assembly of your furniture. A Philips
head screwdriver (not included) is required for the assembled of this product.
For ease and speed of assembly, we recommend that before you commence each step
of the assembly, that you idenfy all the parts required for that step.
For larger items, please ensure that you have sufficient space and people to assemble your
product safely.
We recommend that, where possible, all items are assembled near to the area in which they
will be placed in use, to avoid moving the product unnecessarily once assembled.
For the protecon of your furniture, we recommend that the product is placed on a
protected surface during assembly to prevent any damage.
During assembly, Do not tighten bolts / screws completely until all bolts / screws are lined up and
inserted into holes, Do not over tighten screws and bolts to avoid stripping, Do not use power tools
Always place the product on a flat, steady and stable surface.
Do not stand on the product. Do not use the product as a stepladder.
This product is intended for indoor, household use only as it is a non industrial product.

3
Item No. : XXXX
Item No. : H0043
Contact Us : [email protected]
Contact Us : [email protected]
A
B
C
D
20PCS
2PCS
14PCS
E
F
G
H16
IHandle
J12
KPlastic Connector 12
L
M
Metal Pin
Metal Hinge
Magnetic Door Catch
+
5*14MMO Screw
3*14MM ScrewO
5*45MMO Screw
6*35MM
15*10MM
O Cam Bolt
O Cam Lock
8*30MMO Wooden Dowel
3*12MM ScrewO
3*12MM ScrewO
PCS
PCS
PCS
PCS
PCS
PCS
PCS
PCS
PCS
PCS

AFTER SALES SUPPORT
If you have any general enquiries or require spare parts for this product, please feel free to
contact us via the following email:
Email: [email protected]
You can contact us for support at any time. We'll answer you in 24hrs.
Contact Us : [email protected]
Item No. : H0043
Contact Us : [email protected]
ASSEMBLY DIAGRAM
12345699
10111213121212 87
4

ASSEMBLY STEPS
STEP 1.
STEP 2.
Item No. : H0043
Contact Us : [email protected]
Contact Us : [email protected]
x205x14mm6
1213121212
A
x2B6x35mm1Cx4x8F3x12mmFBBCBFasten 4 x corner legs (12) and 1 x middle leg (13) to the bottom panel (6) using 20 x screws (A).
Tighten with a screwdriver.
Attach 2 x magnetic door catch (B) onto top panel (1) using 4 x screws (C).
Insert 8 x cam bolts (F) onto top panel as shown. Tighten with a screwdriver.
5

ASSEMBLY STEPS
STEP 3.
STEP 4.
Item No. : H0043
Contact Us : [email protected]
Contact Us : [email protected]
x2x2x2x43x12mm3x12mmBECIC
I
7
8
I
B
E
B
623455x45mmHx8x8D8x30mmDHHAttach 2 x door handles (I) to both door panels (7), (8) using 4 x screws (E).
Fasten 2 x magnetic door catch (B) to door panels (7), (8) using 2 x screws (C). Tighten with a
screwdriver.
Attach panels (2, 3, 4, 5) to bottom panel (6) using 8 x wooden dowels (H) and 8 x screws (D).
Tighten with a screwdriver.
6

ASSEMBLY STEPS
STEP 5.
STEP 6.
Item No. : H0043
Contact Us : [email protected]
Contact Us : [email protected]
9
10
915x10mmx8GHx88x30mm1GHHSlide 2 x back panels (9) and middle back panel (10) into position.
7
Attach top panel (1) to assembled unit using 8 x wooden dowels (H) and 8 x cam locks
(G). Tighten with a screwdriver.

ASSEMBLY STEPS
STEP 7.
STEP 8.
Item No. : H0043
Contact Us : [email protected]
Contact Us : [email protected]
LLMMMMM
3x12mmLx4x8x4CM
CC
MMMM
11
78
M
Insert 4 x metal hinges (M) and 4 x metal pins (L) into position as shown.
8
Attach both side door panels (7) and (8) to assembled unit using 8 x screws (C). Tighten with a
screwdriver.
Place shelf (11) on top of support pins.

ASSEMBLY STEPS
STEP 9.
Item No. : H0043
Contact Us : [email protected]
Contact Us : [email protected]
3x14mmKx12x12JJK
9
Fasten 12 x plastic connector (K) to the back panel using 12 x screws (J). Tighten with a screwdriver.