Anmytek Mid Century H0051 User manual

ASSEMBLY AND CARE GUIDE
2 x 1 m
FLOOR SPACE REQUIRED
M id Century Floating
Side Table
2 PEOPLE
REQUIRED FOR ASSEMBLY
1 HOUR
ASSEMBLY TIME
Item No.: H0051
Contact Us: [email protected]
Contact Us: [email protected]
1

SAFETY PRECAUTIONS
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
WA RNING : ENSURE THE WA LL STRA P IS AT TACHED TO
AVOID SERIOUS INJURY .
To avoid any serious or fatal injury, this product has been fied with a wall strap to
prevent toppling. We strongly recommend that this product is permanently fixed to the
wall or other suitable surface. Fixing devices are not included since different surface
materials require different aachments. Please seek professional advice
if you are in doubt of what fixing device to use.
Do not stand on the product. Do not climb on the product. Do not swing on the product.
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING AND USING THE PRODUCT.
1. Please check that all parts are present before you start the assembly of your furniture. A Philips
head screwdriver (not included) is required for the assembled of thisproduct.
2. For ease and speed of assembly, we recommend that before you commence each step
of the assembly, that you idenfy all the parts required for that step.
3. For larger items, please ensure that you have sufficient space and people to assemble your
product safely.
4. We recommend that, where possible, all items are assembled near to the area in which they
will be placed in use, to avoid moving the product unnecessarily once assembled.
5. For the protecon of your furniture, we recommend that the product is placed on a
protected surface during assembly to prevent any damage.
6. During assembly, Do n ot ti ghten b olts / sc rews completely u ntil al l b olts / sc rews are lined up and
inserted into holes, Do not over tighten screws and bolts to avoid stripping, Do not use power tools
7. Always place the product on a flat, steady and stable surface.
8. Do not stand on the product. Do not use the product as a stepladder.
9. This product is intended for indoor, household
use only as it is a non industrial product.
CARE AND CLEANING
• Please periodically check all fings and re-ghten as necessary.
• To clean your item, please use a damp cloth and wipe clean.
• Never allow any kind of liquid to remain on your furniture. If liquid spills onto the
product, please wipe clean as soon as possible.
Item No.: H0051
Contact Us: [email protected]
Contact Us: [email protected]
2

ASSEMBLY DIAGRAM
AFTER SALES SUPPORT
If you have any general enquiries or require spare parts for this product, please feel free to
contact us via the following email:
Email: [email protected]
You can contact us for support at any time. We'll answer you in 24hrs.
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑩
⑪
⑫
⑫
⑬
⑬
⑭
Item No.: H0051
Contact Us: [email protected]
Contact Us: [email protected]
3

Ax14 Bx14 Cx10
Dx4 Ex1 Fx1
Gx1 Hx4 Ix1
Jx1 Kx8 Lx4
Mx4 Nx1 Ox4
Px4 Qx1 Rx1
Sx1 Tx1 Ux2
3.5x12mm
3.5x35mm
3.5x45mm
3x12mm
3.5x35mm
3.5x10mm
6x35mm
6x25mm
6x20mm
Item No.: H0051
Contact Us: [email protected]
Contact Us: [email protected]
4

ASSEMBLY STEPS
STEP 1.
②
②
③
③
④
⑤
D
STEP 2.
①
②
③
A
B
Attach panels (2), (3) to panel (4) using 4 x screws (D) with a screwdriver.
Slide panel (5) into position.
Attach panel (1) to assembled unit using 4 x cam bolts (A), 4 x cam locks (B) with a screwdriver.
Item No.: H0051
Contact Us: [email protected]
Contact Us: [email protected]
5

ASSEMBLY STEPS
STEP 3.
STEP 4.
①
K
K
F
G
UE
⑦
K
IJ
K
⑥
Find out the correct drawer rails (F), (G). Fix (F) to the left side of drawer, (G) to the right side
using 4 x screws (K). Don't mix up (F) and (G).
Attach the handle (E) to the drawer using 2 x bolts (U) with a screwdriver.
Find out the correct runners (I) and (K). Fix (I) to panel (6), (J) to panel (7) using 4 x screws (K).
Don't mix up (I) and (J). For the runners (I & J), the end of the runners are close to the grooves.
Item No.: H0051
Contact Us: [email protected]
Contact Us: [email protected]
6

ASSEMBLY STEPS
STEP 5.
STEP 6.
C
A
A
B
B
⑥
⑦
⑧
⑭
C
A
B
⑥
⑦
⑨
⑩
Attach panels (8), (14) to panels (6), (7) using 2 x wooden dowels (C), 6 x cam bolts (A), 6 x cam
locks (B) with a screwdriver.
Slide panel (10) into grooves.
Attach the top panel (9) to assembled unit using 4 x wooden dowels (C), 4 x cam bolts (A),
4 x cam locks (B).
Item No.: H0051
Contact Us: [email protected]
Contact Us: [email protected]
7

ASSEMBLY STEPS
STEP 7.
STEP 8.
⑥
⑦
⑩
C
H
⑥
⑦
⑪
Put the upside down and slide panel (10) into grooves.
Attach the bottom panel (11) to assembled unit using 4 x wooden dowels (C), 4 x screws (H) with
a screwdriver.
Item No.: H0051
Contact Us: [email protected]
Contact Us: [email protected]
8

ASSEMBLY STEPS
STEP 9.
STEP 10.
P
O
L
N
L
M
⑫⑫
⑬
⑬
Fix 2 x metal parts (13) to 2 x metal legs (12) using 4 x bolts (L) with an Allen Key (N).
Attach the assembled metal frame to the assembled unit using 4 x bolts (M).
Fix 4 x plastic wedges (P) to the assembled unit using 4 x screws (O) with a screwdriver.
Item No.: H0051
Contact Us: [email protected]
Contact Us: [email protected]
9

ASSEMBLY STEPS
STEP 11.
Q
R
S
T
Fix the wall strap (S) to the furniture using a screw (Q) with a screwdriver.
Fasten the furniture to wall using a wall anchor (T) and a screw (R).
Item No.: H0051
Contact Us: [email protected]
Contact Us: [email protected]
10
STEP 12.
Final assembly.

WALL FIXING GUIDE
NOTE: Supplied wall plugs are only suitable for use in masonry walls.
If you have any doubts about using the correct plug for your wall, please seek professional advice. Failure
of
the product due to using incorrect fixings is the responsibility of the installer.
IMPORTANT:
When drilling into walls, always check for hidden wires or pipes, etc.
Tips & Tricks
Make sure that the hardware used is suitable for supporng your unit.
Please consult a qualified trades person if unsure.
If you are unsure, please select a larger screw and wall plug.
Ensure that you use the recommended drill bit to match the wall plug and hole size.
Take extra care when drilling high walls, ceiling and ceramic les. Ensure wall plugs are
inserted beyond the thickness of the ceramic les to avoid spling or cracking.
Ensure that wall plugs are well fitted and are a ght fit in the drilled hole.
Types of Walls
Use one of the following types of wall plug (not included) if your walls are made of brick, breeze block, concrete,
stone or wood. Screws may be able to be fixed directly to solid wood walls as they will provide a secure anchor point.
1. General Purpose Wall Plug
Generally, aerated blocks should not be used to
case. For light loads, general purpose wall plugs
can be used.
2. Plasterboard Wall Plug
For use when aaching light loads onto
plasterboard parons.
3. Cavity Fixing Wall Plug
For use with plasterboard parons or hollow
wooden doors.
4. Cavity Fixing Heavy Duty Wall Plug
such as shelving and wall cabinets.
5. Hammer Fixing Wall Plug
For use with concrete block or brick walls, or walls
6. Shield Anchor Wall Plug Heavy Loads
For use with concrete or brick walls, or for use
with heavier loads such as TV & HiFi speakers
and satellite dishes, etc.
Item No.: H0051
Contact Us: [email protected]
Contact Us: [email protected]
11