Anmytek Warran T0009 User manual

1
ASSEMBLY AND CARE GUIDE
2 x 1 m
FLOOR SPACE REQUIRED
Item No. : XXXX
Item No. : T0009
Contact Us : [email protected]
Contact Us : [email protected]
Warran Nesting Coffee
Table Set of 2
1 PEOPLE
REQUIRED FOR ASSEMBLY
20 MIN
ASSEMBLY TIME

CARE AND CLEANING
SAFETY PRECAUTIONS
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING AND USING THE PRODUCT.
2
1.
2.
3.
4.
5.
6.
7.
8.
9.
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
• Please periodically check all fings and re-ghten as necessary.
• To clean your item, please use a damp cloth and wipe clean.
• Never allow any kind of liquid to remain on your furniture. If liquid spills onto the
product, please wipe clean as soon as possible.
WA RNING : ENSURE THE WA LL STRA P IS AT TACHED TO
AVOID SERIOUS INJURY .
To avoid any serious or fatal injury, this product has been fied with a wall strap to
prevent toppling. We strongly recommend that this product is permanently fixed to the
wall or other suitable surface. Fixing devices are not included since different surface
materials require different aachments. Please seek professional advice
if you are in doubt of what fixing device to use.
Do not stand on the product. Do not climb on the product. Do not swing on the product.
Item No. : XXXX
Item No. : T0009
Contact Us : [email protected]
Contact Us : [email protected]
Please check that all parts are present beforeyou start the assembly of your furniture. A Philips
head screwdriver (not included) is required for the assembled of this product.
For ease and speed of assembly, we recommend that before you commence each step
of the assembly, that you idenfy all the parts required for that step.
For larger items, please ensure that you have sufficient space and people to assemble your
product safely.
We recommend that, where possible, all items are assembled near to the area in which they
will be placed in use, to avoid moving the product unnecessarily once assembled.
For the protecon of your furniture, we recommend that the product is placed on a
protected surface during assembly to prevent any damage.
During assembly,Do not tighten bolts / screws completely until all bolts / screws are lined up and
inserted into holes,Do not over tighten screws and bolts to avoid stripping,Do not use power tools
Always place the product on a flat, steady and stable surface.
Do not stand on the product. Do not use the product as a stepladder.
This product is intended for indoor, household use only as it is a non industrial product.

3
AFTER SALES SUPPORT
PARTS LIST
Item No. : XXXX
Item No. : T0009
Contact Us : [email protected]
Contact Us : [email protected]
Ax8pcs Bx8pcs Cx8pcs
Φ 8x30mm Φ 8x15mm
1x2pcs
x1pcs
2x1pcs 3x2pcs
4
If you have any general enquiries or require spare parts for this product, please
feel free to
contact us via the following email:
Email: [email protected]
You can contact us for support at any time. We'll answer you in 24hrs.

Item No. : T0009 Contact Us : [email protected]
Contact Us : [email protected] 4
ASSEMBLY DIAGRAM
1
1
2
3
3
4

5
ASSEMBLY STEPS
STEP 1.
STEP 2.
Item No. : XXXX
Item No. : T0009
Contact Us : [email protected]
Contact Us : [email protected]
1
2
1
Attach 2 x part (1) to part (2) using 4 x bolts (A) and 4 x nuts (B) as shown. Tighten with a screwdriver.
Attach 4 x foot (C) to legs as shown.

6
ASSEMBLY STEPS
STEP 3.
STEP 4.
Item No. : XXXX
Item No. : T0009
Contact Us : [email protected]
Contact Us : [email protected]
3
3
4
Attach 2 x part (3) to part (4) using 4 x bolts (A) and 4 x nuts (B) as shown. Tighten with a screwdriver.
Attach 4 x foot (C) to legs as shown.

7
ASSEMBLY STEPS
STEP 5.
Item No. : XXXX
Item No. : T0009
Contact Us : [email protected]
Contact Us : [email protected]
Final assembly.