Anmytek Olso H0035 User manual
1
ASSEMBLY AND CARE GUIDE
2 x 1 m
FLOOR SPACE REQUIRED
2 PEOPLE
REQUIRED FOR ASSEMBLY
1 HOUR
ASSEMBLY TIME
Item No. : XXXX
Item No. : H0035
Olso Multipurpose Storage Cabinet
with Display Shelves and Doors
CARE AND CLEANING
SAFETY PRECAUTIONS
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING AND USING THE PRODUCT.
2
1.
2.
3.
4.
5.
6.
7.
8.
9.
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
• Please periodically check all fings and re-ghten as necessary.
• To clean your item, please use a damp cloth and wipe clean.
• Never allow any kind of liquid to remain on your furniture. If liquid spills onto the
product, please wipe clean as soon as possible.
WA RNING : ENSURE THE WA LL STRA P IS AT TACHED TO
AVOID SERIOUS INJURY .
To avoid any serious or fatal injury, this product has been fied with a wall strap to
prevent toppling. We strongly recommend that this product is permanently fixed to the
wall or other suitable surface. Fixing devices are not included since different surface
materials require different aachments. Please seek professional advice
if you are in doubt of what fixing device to use.
Do not stand on the product. Do not climb on the product. Do not swing on the product.
Item No. : XXXX
Item No. : H0035
Please
check
that
all
parts
are
present
beforeyou
start
the
assembly
of
your
furniture. A Philips
head screwdriver (not included) is required for the assembled of this product.
For
ease
and
speed
of
assembly,
we
recommend
that
before
you
commence
each
step
of
the
assembly,
that
you
idenfy
all
the
parts
required
for
that
step.
For
larger
items,
please
ensure
that
you
have
sufficient
space
and
people
to
assemble
your
product
safely.
We
recommend
that,
where
possible,
all
items
are
assembled
near
to
the
area
in
which
they
will
be
placed
in
use,
to
avoid
moving
the
product
unnecessarily
once
assembled.
For
the
protecon
of
your
furniture,
we
recommend
that
the
product
is
placed
on
a
protected
surface
during
assembly
to
prevent
any
damage.
During
assembly,
Do
not
tighten
bolts
/
screws
completely
until
all
bolts
/
screws
are
lined
up
and
inserted
into
holes,
Do
not
over
tighten
screws
and
bolts
to
avoid
stripping,
Do
not
use
power
tools
Always
place
the
product
on
a
flat,
steady
and
stable
surface.
Do
not
stand
on
the
product.
Do
not
use
the
product
as
a
stepladder.
This
product
is
intended
for
indoor,
household
use
only
as
it
is
a
non
industrial
product.
4
AFTER SALES SUPPORT
Item No. : H0035
ASSEMBLY DIAGRAM
If you have any general enquiries or require spare parts for this product, please
:
5
ASSEMBLY STEPS
STEP 1.
STEP 2.
Item No. : H0035
Attach 6 x bolts (A) to panel (1). Tighten with a screwdriver.
Attach 2 x bolts (A) to panel (7). Tighten with a screwdriver.
Ax6
Ax2
ASSEMBLY STEPS
STEP 3.
STEP 4.
Item No. : H0035
Attach 4 x bolts (A) to panel (4).
Tighten with a screwdriver.
Attach 4 x bolts (A) to panel (3).
Tighten with a screwdriver.
B
Attach panel (5) to panel (7) and secure with
2 x locking nuts (B) as shown. Tighten with a
screwdriver.
6
Ax8
Bx2 Cx2 Dx2
Attach panel (5) to panel (7) using 2 x wood
dowels (C) and 2 x screws (D) and tighten
with a screwdriver.
ASSEMBLY STEPS
STEP 5.
STEP 6.
Item No. : H0035
Attach panel (7) to assembled unit using 2 x wooden dowels (C) and 2 x screws (D) as shown.
Tighten with as screwdriver.
B
Attach panel (5) to assembled unit using 2 x locking nuts (B) as shown.
Tighten with a screwdriver.
7
Cx2
Dx2
Bx2
ASSEMBLY STEPS
STEP 7.
STEP 8.
Item No. : H0035
B
Attach panel (4) to assembled unit and secure with 4 x locking nuts (B).
Tighten with a screwdriver.
Slide 3 x panels (6) into position as shown.
6
6
6
8
Bx4
ASSEMBLY STEPS
STEP 9.
STEP 10.
Item No. : H0035
3
Attach panel (3) to assembled unit and secure with 4 x locking nuts (B).
Tighten with a screwdriver.
B
2
Attach 2 x parts (10) to 2 x parts (11) with 4 x parts (12) as shown. Secure with
16 x screws (E). Tighten with a screwdriver.
9
Bx4
Ex16
ASSEMBLY STEPS
Item No. : H0035
STEP 11.
STEP 12.
Attach 4 x legs (9) to assembled unit. Secure with 8 x bolts (G) and 8 x washers (H) and
8 x washers (I).
Attach panel (2) to assembled unit using 6 x wooden dowels (C) and 6 x screws (D).
Tighten with a screwdriver.
Attach 4 x foot pads (M) to legs.
U
10
Tighten with a hex key (U).
Hx8
Ix8
Mx4
Ux1
Gx8
Cx6
Dx6
ASSEMBLY STEPS
Item No. : H0035
STEP 13.
Attach legs to assembled unit using 6 x screws (J). Tighten with a screwdriver.
STEP 14.
Attach panel (1) to assembled unit and secure with 6 x locking nuts (B).
Tighten with a screwdriver.
B
11
Jx6
Bx6
ASSEMBLY STEPS
Item No. : H0035
STEP 15.
F
T
K
8
F
F
F
F
STEP 16.
Attach handle (L) to the door panel (8) using 2 x bolts (K). Tighten with a screwdriver.
Attach 2 x hinges (T) to the door panel (8) using 4 x screws (F) as shown.
Repeat with the other 2 door panels.
Attach door (8) to the right side of assembled unit using 8 x screws (F). Tighten with a
screwdriver.
K
T
F
FF
12
Fx12
Lx3
Kx6
Tx6
Fx8
Tx2
ASSEMBLY STEPS
Item No. : H0035
STEP 17.
8
F
F
8
F
F
F
F
Attach 2 x doors (8) to the left side of assembled unit using 16 x screws (F) as shown.
Tighten with a screwdriver.
13
Fx16
Tx4
Is your cabinet door
looking crooked or
unevenly spaced?
Then you’ve come to the right place.
Follow the illustrations below to get
your cabinet door aligned and ready for
action.
If your door is too low or too high...
Loosen the height screws, then move the door up or down to
make it level.
If the space between your doors is o...
Loosen the side-to-side screws, then screw counter-clockwise
to make the gap wider or clockwise to close any gaps.
If you need to adjust the depth of the doors...
Adjust the in-and-out screws until the door is aligned with the
side of the cabinet.
14
ASSEMBLY STEPS
Item No. : H0035
STEP 18.
15
Px12
Qx12
Rx2
Sx2
Ox2
Attach 12 x plastic wedges (Q) to the back of assembled unit as shown and secure with 12 x
screws (P). Tighten with a screwdriver.
Attach 2 x wall straps (S) to the back of assembled unit as shown and secure with 2 x
screws (O)
and 2 x washers (R). Tighten with a screwdriver.
ASSEMBLY STEPS
Item No. : H0035
ASSEMBLY STEPS
Item No. : H0035
STEP 19.
1
6
Wall
Dx2
Nx2
Rx2
Sx2
Fasten to the wall using 2 x wall anchors (N) and 2 x screws (D) and tighten with a screwdriver.
Ensure unit is balanced and steady before use.
Final assembly.
WALL FIXING GUIDE
NOTE: Supplied wall plugs are only suitable for use in masonry walls.
If you have any doubts about using the correct plug for your wall, please seek professional advice. Failure
of
the product due to using incorrect fixings is the responsibility of the installer.
IMPORTANT:
When drilling into walls, always check for hidden wires or pipes, etc.
Tips & Tricks
Make sure that the hardware used is suitable for supporng your unit.
Please consult a qualified trades person if unsure.
If you are unsure, please select a larger screw and wall plug.
Ensure that you use the recommended drill bit to match the wall plug and hole size.
Take extra care when drilling high walls, ceiling and ceramic les. Ensure wall plugs are
inserted beyond the thickness of the ceramic les to avoid spling or cracking.
Ensure that wall plugs are well fitted and are a ght fit in the drilled hole.
Types of Walls
Use one of the following types of wall plug (not included) if your walls are made of brick, breeze block, concrete,
stone or wood. Screws may be able to be fixed directly to solid wood walls as they will provide a secure anchor point.
1. General Purpose Wall Plug
Generally, aerated blocks should not be used to
case. For light loads, general purpose wall plugs
can be used.
2. Plasterboard Wall Plug
For use when aaching light loads onto
plasterboard parons.
3. Cavity Fixing Wall Plug
For use with plasterboard parons or hollow
wooden doors.
4. Cavity Fixing Heavy Duty Wall Plug
such as shelving and wall cabinets.
5. Hammer Fixing Wall Plug
For use with concrete block or brick walls, or walls
6. Shield Anchor Wall Plug Heavy Loads
For use with concrete or brick walls, or for use
with heavier loads such as TV & HiFi speakers
and satellite dishes, etc.
Item No. : XXXX
Item No. : H0035
17
Table of contents
Other Anmytek Indoor Furnishing manuals
Anmytek
Anmytek California H0027 Installation guide
Anmytek
Anmytek Stockholm H0036 User manual
Anmytek
Anmytek Warran T0009 User manual
Anmytek
Anmytek Brooklyn H0038 User manual
Anmytek
Anmytek California T0012 User manual
Anmytek
Anmytek Mid Century H0051 User manual
Anmytek
Anmytek CH004 User manual
Anmytek
Anmytek H0013 User manual
Anmytek
Anmytek H0052 Installation guide
Anmytek
Anmytek Seattle H0033 Installation guide
Anmytek
Anmytek H0012 Installation guide
Anmytek
Anmytek H0046 User manual
Anmytek
Anmytek H0020 User manual
Anmytek
Anmytek H0045 User manual
Anmytek
Anmytek H0037 Installation guide
Anmytek
Anmytek H0010 User manual
Anmytek
Anmytek Charlotte H0032 User manual
Anmytek
Anmytek Middle Century Media H0043 User manual
Anmytek
Anmytek David H0034 User manual
Anmytek
Anmytek Stockholm H0044 User manual
Popular Indoor Furnishing manuals by other brands
Polini kids
Polini kids Marvel 895 Assembly instructions
C-Hopetree
C-Hopetree CHTFBOOK3WW Assembly instructions
LÜTTENHÜTT
LÜTTENHÜTT Sammy Assembly instructions
Madison Park
Madison Park Hayden Slipper Accent Chair Assembly instructions
J.Burrows
J.Burrows TORO RETURN Assembly instructions
Core Products
Core Products TX916 manual
Alice's Home
Alice's Home MADI IMADSTBL32 quick start guide
Wellness Nordic
Wellness Nordic NORDIC SENSI NSC-21C Instructions for use
Unfinished Furniture of Wilmington
Unfinished Furniture of Wilmington SUSSEX DROPLEAF WC-16 Assembly instructions
Next
Next OHARA 796762 Assembly instructions
bily
bily BG38 Series manual
Teknion
Teknion Livello Assembly instructions
