Anzzi CS-FRGLPNL00 Series User manual

DON’T WAIT!
REGISTER NOW!
Register your product within 90 days to ensure your product is
recognized as an official purchase and is eligible for warranty
coverage.
Mail in the completed registry card (Pg. 2) or register online
at www.swcorp.com/register .
Item: CS-CTRTP00MW
CS-FRGLPNL00**
CS-GLPNL00
INSTALL & OPERATION MANUAL
V1.0
CONSOLE SINK

Have questions? Call us at or visit us at 1-844-44-ANZZI www.ANZZI.com
PRODUCT REGISTRATION∗
IMPORTANT: YOUR WARRANTY WILL NOT BE RECOGNIZED UNLESS THIS CARD IS
FULLY COMPLETED AND RETURNED OR ONLINE REGISTRATION IS COMPLETED.
To ensure that your warranty is registered and confirmed please do one of the following:
1. Register online at www.swcorp.com/register. You will be asked to fill out the same
information you would in the registration card. Registering online is fast, secure and
ensures we receive your information.
2. Complete, cut-out and mail the registration card below.By returning this registration
card we confirm the date of purchase for your new product. This confirmation will allow
us to process any warranty claims.
Mail the card to: 5701 NW 35 Avenue, Miami, FL 33142
Product Registration Card
Name
..................................................................................... Address ...........................................................................................................................
City ............................................... State ........................... Zip ..............................
Phone ........................................... Email ........................... .........................................
Date of Purchase ...........................
Installer’s Name ..................................................................... Phone ................................................................................
I have read the Owner’s Manual carefully and understand and agree that any installation, operation or maintenance of the product must be
done strictly in accordance with instructions and guidelines contained in the owner’s manual and installation guide.
Signature____________________________________________________________Date ______________________________________________
CUT ALONG
DOTTED LINE.

Overall Dimensions 36"Lx22"Wx34"H
Basin Dimensions 18 1/8"Lx11 3/4"W
Water Depth 4 1/8"
Drain Hole 1 3/4"
Faucet Type 1 3/8"(single hole)
6"
36" [914mm]
22" [559mm]
28" [712mm]
34" [864mm]
21 7/8" [557mm]
35 7/8" [910mm]
6 1/4" [160mm]
28" [712mm]
1 1/8"x3/8" tube
30mmx10mm tube
level screw

A 3pcs B 3pcs
drilling holes Φ3/8" (8mm)
B
A
Section 1 Section 2
NOTE: Silicone adhesive and tools necessary for installation are NOT included.
1.Place the stand upright in the desired location
and level using the height adjusters built into the
bottom of the legs.
2.Use a pencil and the pre-drilled holes in the st-
and frame to mark location of mounting hardware
on wall.
3.Drill holes for mounting hardware in the wall.
4.Insert anchors into the holes and secure the
stand to the wall with the screws.
5.Apply silicone adhesive to the frame of the low-
er shelf and then place the glass plate on the fra-
me.
1.Apply a thin coat of silicone adhesive to the back
of the sink where it meets the wall.
2.Apply a thin coat of silicone adhesive to the sta-
nd's top frame where the sink will rest.
3.Carefully place the sink on the top frame of the
stand and center it.
4.Allow silicone adhesive to dry for 24 hours.

Care and Maintenance
Removing stains and fixing scratches or cuts
Although all of our solid surface stone countertops are solid and non-porous, they still can be stained,
scratched, or cut during use. And because the man-made stone countertop is solid all the way through,
it is easy to renew to its original appearance by the following steps.
Identify the extent of the damage, if it is minor damage, try to repair it with an abrasive cleanser or com-
mon household degreaser.
Mild soapy water or ammonia-based detergents can remove most dirt and stains.
If the above steps are unfeasible, follow the polishing steps below:
a. Matte white finish:
•Clean the countertop surface with clear water to ensure no dust remains.
•Use 600 sandpaper to polish the damaged surface with water in moderate pressure until the damage
is gone and the countertop surface is smooth.
•Rinse the countertop surface with clear water. Wipe completely dry with a clean cloth.
b. Matte grey finish:
•Clean the countertop surface with clear water to ensure no dust remains.
•Use 1200 sandpaper to polish the damaged surface with water in moderate pressure until the dama-
ge is gone, then use 1200 scouring pad dipping with water to repeat polishing in circles until the counte-
rtop surface is smooth.
•Rinse the countertop surface with clear water. Wipe completely dry with a clean cloth.
Attentions
•Pay attention to spills and wipe them up immediately. Hard water deposits can ruin the shine on the c-
ountertop.
•Do not put the high-temperature object directly on the manmade stone countertop. Excessive heat ca-
n cause a thermal shock, which may crack the countertop.
•Never stand or sit on the stone countertop. Small fissures in the stone may cause cracks if subjected
to excessive weight.