Aplex APC-3584B User manual

APC-3x84B/APC-3x85B
15”, 17”, and 19”Fanless 5 sides IP65 Intel Celeron Stainless Steel Panel PC
User Manual
Release Date Revision
Mar. 2016 V1.1
®2016 Aplex Technology, Inc. All Rights Reserved. Published in Taiwan
Aplex Technology, Inc.
15F-1, No.186, Jian Yi Road, Zhonghe District, New Taipei City 235, Taiwan
Tel: [phone] Fax: [phone] URL: www.aplextec.com

APC-3x84B/APC-3x85B User Manual
1
Revision History
Reversion
Date
Description
1.0
2015/10/08
Official Version
1.1
2016/03/31
Update APC-3X84B Spec., Remove the two
screws on the IO side

APC-3x84B/APC-3x85B User Manual
2
Warning!________________________
Caution
Risk of explosion if the battery is replaced with an incorrect type.
Batteries should be recycled where possible. Disposal of used batteries must be in
accordance with local environmental regulations.
Disclaimer
This information in this document is subject to change without notice. In no event
shall Aplex Technology Inc. be liable for damages of any kind, whether incidental or
consequential, arising from either the use or misuse of information in this
document or in any related materials.
Electric Shock Hazard –Do not operate the machine with its back cover removed.
There are dangerous high voltages inside.
This equipment generates, uses and can radiate radio frequency energy and
if not installed and used in accordance with the instructions manual, it may cause
interference to radio communications. It has been tested and found to comply
with the limits for a Class A computing device pursuant to FCC Rules, which are
designed to provide reasonable protection against such interference when
operated in a commercial environment. Operation of this equipment in a
residential area is likely to cause interference in which case the user at his own
expense will be required to take whatever measures may be required to correct
the interference.

APC-3x84B/APC-3x85B User Manual
3
Packing List
Accessories (as ticked) included in this package are:
□Adaptor
□Driver & manual CD disc
□Other.___________________(please specify)

APC-3x84B/APC-3x85B User Manual
4
Safety Precautions
Follow the messages below to prevent your systems from damage:
◆Avoid your system from static electricity on all occasions.
◆Prevent electric shock. Don‘t touch any components of this card when
the card is power-on. Always disconnect power when the system is not
in use.
◆Disconnect power when you change any hardware devices. For instance,
when you connect a jumper or install any cards, a surge of power may
damage the electronic components or the whole system.

APC-3x84B/APC-3x85B User Manual
5
Table of Contents
Revision History…………………………………………………………………………………………………….1
Warning................................................................................…………………………….…2
Caution/Disclaimer……..……………………………………………………………………………………..…2
Packing List…………………………………….……………………………………………………………………..3
Safety Precautions…………………………………………………………………….…..……………………..4
Chapter 1 Getting Started
1.1 Features………………………..………………………...…………………………..7
1.2 Specifications…………………...………………………………………………….7
1.3 Dimensions………………………....……………………………………………...9
1.4 Brief Description of APC-3x84B/3x85B.………………………….……12
1.5 Installation of HDD/SSD and SD Card –APC-3X84B/3X85B….14
1.6 Installation of I/O Cover –APC-3X84B…………………………….….16
1.7 Installation of I/O Cover –APC-3X85B.…………………………….…17
Chapter 2 Hardware
2.1 Motherboard Introduction……………………...……………..………....18
2.2 Specifications…………………………..…………………………………………18
2.3 Jumpers and Connectors Location……………………………………...21
2.4 Jumpers Setting and Connectors…………………………………..……22
Chapter 3 BIOS Setup
3.1 Operations after POST Screen…...…….……...…………………………49
3.2 BIOS Setup Utility……………………………………………………………….49
3.3 Main Settings……………………………………..………………………………50
3.4 Advanced Settings……………………………………………………………...51
3.5 Chipset Settings……………………………………….………………………...59
3.6 Security Settings…………………………………………….…………………..61
3.7 Boot Settings…..………………………………………….……………………..61
3.8 Save & Exit Settings……………………………………..…………………....63
Chapter 4 Installation of Drivers
4.1 Intel (R) AtomTM SoC Chipset.………..……...………….………………66
4.2 Intel (R) VGA Chipset……………………………………………….……......69
4.3 Intel (R) LAN Driver………..………………………………………..………...73

APC-3x84B/APC-3x85B User Manual
6
4.4 Realtek ALC662 HD Audio Driver Installation………………………76
4.5 USB 3.0 Driver…………………………………………………………………….77
4.6 Com Driver…………………………………………………………………………80
Chapter 5 Touch Screen Installation
5.1 Windows XP/2003/Vista/7 Universal Driver Installation for
PenMount 6000 Series...……………….…………………………………...83
5.2 Software Functions…………………………………………..………………..87
Figures
Figure 1.1: Dimensions of APC-3584B…………..………………....……………......9
Figure 1.2: Dimensions of APC-3585B……………………………………….………...9
Figure 1.3: Dimensions of APC-3784B……………………………..…………………10
Figure 1.4: Dimensions of APC-3785B…………………………………………………10
Figure 1.5: Dimensions of APC-3984B……………………………..…………………11
Figure 1.6: Dimensions of APC-3985B………………………………………………..11
Figure 1.7: Front View of APC-3x84B…………………..…………………………….12
Figure 1.8: Rear View of APC-3x84B………………………………………………..…12
Figure 1.9: Rear view with I/O Cover………………………………………………….12
Figure 1.10: Front View of APC-3x85B…………….…….……………………….….13
Figure 1.11: Rear View of APC-3x85B…………………….……………………….….13
Figure 1.12: Rear View with I/O Cover……………………………………………….13
Figure 2.1: Motherboard Dimensions………………………………………….…….19
Figure 2.2: Jumpers and Connectors Location-Board Top……………….….20
Figure 2.3: Jumpers and Connectors Location-Board Bottom…………..…20

APC-3x84B/APC-3x85B User Manual
7
Chapter 1 Getting Started
1.1 Features
Fanless Design
Intel Celeron N2930 1.83GHz Processor (E3845 for option)
Onboard 2GB DDR3L
9~36V DC Wide-ranging Power Input
5 Sides IP65
5-wire Resistive Touch Screen
1.2 Specifications
APC-3584B/85B
APC-3784B/85B
APC-3984B/85B
System
CPU
Onboard Intel Celeron N2930(1.83GHz )
Onboard Intel Atom E3845(1.91GHz) for option
Chipset
SoC
Memory
Onboard 2GB DDR3L SDRAM
Onboard 4GB DDR3L SDRAM (option)
IO Port
USB
3 x USB 2.0 type A
1 x USB 3.0 type A
Serial/Parallel
1 x RS-232/422/485 DB-9, Default RS-485, COM1
2 x RS-232 DB-9, COM2 and COM3
Audio
2 x Line-out, phone jack
LAN
2 x GbE LAN RJ-45
Power
1 x 3-pin DC Power input terminal
1 x power switch on/off
Storage Space
Storage
1 x 2.5" HDD Space
1 x Internal SD slot onboard
Expansion
Expansion Slot
1 x Mini-PCIe slot full size
Optional WiFi/BT with Antenna

APC-3x84B/APC-3x85B User Manual
8
Display
Display Type
15”TFT LCD
17”TFT LCD
19”TFT LCD
Max. Resolution
1024 x 768
1280 x 1024
1280 x 1024
Max. Color
16.7M
16.7M
16.7M
Luminance(cd/m²)
400
350
350
Contrast Ratio
800: 1
1000: 1
1000: 1
Viewing angle
160(H)/140(V)
170(H)/160(V)
170(H)/160(V)
Backlight Lifetime
50,000 hrs
30,000 hrs
50,000 hrs
Touch Screen –Resistive Touch Window Type
TS Control IC
PenMount 6000 on Board
Interface
USB
Light Transmission
Over 80%
Power
Power Input
9~36V DC
Power Consumption
MAX:18.6W(3584B)
MAX:21.4W(3585B)
MAX:21.9W(3784B)
MAX:19.8W(3785B)
MAX:17.6W(3984B)
MAX:26.7W(3985B)
Mechanical
Construction
Stainless Steel Chassis for APC-3x84B
Black Steel Chassis for APC-3x85B
IP Rating
5 sides IP65 with I/O cover
Mounting
VESA Mount 75 x 75
VESA Mount
100 x 100
Dimensions
398 x 316 x 50.5 mm
432 x 358 x 55 mm
470 x 388.6 x 55 mm
Net Weight
6.3Kg (3584B)
6.3Kg (3585B)
7.3Kg (3784B)
7.3Kg (3785B)
9.4Kg (3984B)
9Kg (3985B)
Environmental
Operating temperature
0~50°C
Storage temperature
-30~70°C
Storage humidity
10 to 90% @ 40°C, non- condensing
Certification
CE / FCC Class A
Operating System Support
OS Support
Windows 7 Professional for Embedded Systems,
Windows 7 Ultimate for Embedded System,
Windows Embedded 8.1 Pro,
Windows Embedded 8.1 Industry pro

APC-3x84B/APC-3x85B User Manual
9
1.3 Dimensions
Figure 1.1: Dimensions of APC-3584B
Figure 1.2: Dimensions of APC-3585B

APC-3x84B/APC-3x85B User Manual
10
Figure 1.3: Dimensions of APC-3784B
Figure 1.4: Dimensions of APC-3785B

APC-3x84B/APC-3x85B User Manual
11
Figure 1.5: Dimensions of APC-3984B
Figure 1.6: Dimensions of APC-3985B

APC-3x84B/APC-3x85B User Manual
12
1.4 Brief Description of APC-3x84B/3x85B
APC-3x84B/3x85B series come with 15”, 17”, and 19”color TFT LCD, 5 sides IP65, and
are powered by Intel Celeron N2930 (2M Cache, 1.83GHz) processor (E3845
processor is for option). The model comes with 2GB DDR3L onboard and DC 9~36V
wide-ranging power input, 3 x USB 2.0, 1 x USB 3.0, 2 x RS-232 COM ports, 1 x RS-422
COM port, 2 x Line-out, 2 x LAN, and 1 x Power Switch. APC-3x84B is stainless steel
chassis designed; APC-3x85B is black steel chassis designed. The model can be VESA
75 x 75 mounted for 15”and 17”, and VESA 100 x 100 mounted for 19”. The panel PC
has a variety of functions and peripherals. Regarding the storage capability,
APC-3x84B/3x85B provides 1 x 2.5”SATA HDD space, allowing customers to easily
access/backup the data.
Figure 1.7 Front View of APC-3x84B
Figure 1.8: Rear View of APC-3x84B Figure 1.9: Rear View with I/O Cover

APC-3x84B/APC-3x85B User Manual
13
Figure 1.10: Front View of APC-3x85B
Figure 1.11 Rear View of APC-3x85B Figure 1.12: Rear View with I/O Cover

APC-3x84B/APC-3x85B User Manual
14
1.5 Installation of HDD/SSD and SD Card –
APC-3X84B/3 X85B
Step 1
There are six screws to deal with when
enclosing or removing the chassis.
Gently remove two screws.
Step 2
Pull out the cover.
Step 3
Unscrew the screw.

APC-3x84B/APC-3x85B User Manual
15
Step 4
Pull out the bracket carefully.
Step 5
You can replace HDD or SSD by
unscrewing four screws as shown in the
picture.
Step 6
Inside the chassis, you can replace the
SD card as shown in the picture.

APC-3x84B/APC-3x85B User Manual
16
1.6 Installation of I/O Cover –APC-3X84B
Step 1
This is how it looks when the
I/O cover is mounted. To
dismount the cover, you have
to unscrew the two screws.
Step 2
Then you can take the I/O cover
out.

APC-3x84B/APC-3x85B User Manual
17
1.7 Installation of I/O Cover –APC-3X85B
Step 1
This is how it looks when the
I/O cover is mounted. To
dismount the cover, you have
to unscrew the six screws.
Step 2
Then you can take the I/O cover
out.

APC-3x84B/APC-3x85B User Manual
18
Chapter 2 Hardware
2.1 Motherboard Introduction
SBC-7111 is a 4" industrial motherboard developed on the basis of Intel Bay trail-I/M
Processors, which provides abundant peripheral interfaces to meet the needs of
different customers. Also, it features dual GbE ports, 3-COM ports and one Mini PCIE
configuration, one VGA port, one HDMI port, one LVDS interface. To satisfy the
special needs of high-end customers, CN1 and CN2 and CN3 richer extension
functions. The product is widely used in various sectors of industrial control.
2.2 Specifications
Specifications
Board Size
170mm x 113mm
CPU Support
Intel Celeron N2930 / 1.83GHz (4cores,TDP/7.5W, option)
Intel Atom E3845 / 1.91GHz (4cores, 10W, onboard)
Chipset
SoC
Memory Support
Onboard 2GB DDR3L SDRAM (N2930)
Onboard 4GB DDR3L SDRAM (E3845, option)
Graphics
Intel® HD Graphics 313/854MHz (N2930)
Intel® HD Graphics 542/792MHz (E3845, option)
Display Mode
1 x HDMI Port
1 x LVDS (18/24-bit dual LVDS)
1 x CRT Port
Support
Resolution
Up to 1920 x 1200 for HDMI
Up to 1920 x 1200 for LVDS (PS8625)
Up to 1920 x 1200 for CRT
Dual Display
HDMI + LVDS
HDMI + CRT
LVDS + CRT
Super I/O
ITE IT8518E
Fintek F81216AD