Arbor Technology EmCORE-i290H User manual

- 1 -
4041029000100PCopyright®2012 All Rights Reserved.
Quick Installation Guide
Version 1.0
If you have any technical difculties, please consult the user’s manual rst at:
ftp://ftp.arbor.com.tw/pub/manual
Please do not hesitate to call or e-mail our customer service when you still can not
nd out the answer.
http://www.arbor.com.tw
E-mail: [e-mail]
♦ Technical Support
EmCORE-i290H
EPIC Compact Board
CPU
Soldered onboard Intel®
Atom™ N455 1.6GHz/
D525 1.8GHz Processor
Form Factor
EPIC Compact Board
Chipset
Intel®ICH8M
Video
Single Channel 18-bit
LVDS/ Analog RGB
LAN
2 x Realtek 8111E PCIe
Gigabit Ethernet
Audio
Realtek ALC886 HD Audio
CODEC, Line-in/ Line-out/
Mic-in
I/O
Mini PCI/ Mini-Card/
SATA/ SIM/ USB/ COM/
DIO
FCC Class A
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions : (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.

- 2 -
Ordering Information
EmCORE-i290H-N4 Intel® Atom™ N455 1.6GHz EPIC Compact Board
EmCORE-i290H-D5 Intel® Atom™ D525 1.8GHz EPIC Compact Board
EmCORE-i290HD-N4 Intel® Atom™ N455 1.6GHz w/ 2GB NANDrive EPIC Compact Board
EmCORE-i290HD-D5 Intel® Atom™ D525 1.8GHz w/ 2GB NANDrive EPIC Compact Board
CBK-11-2902-00
Cable Kit
1 x Audio Cable
4 x COM Port Cables
1 x IDE Cable
1 x KB & MS Cable
2 x SATA Cables
2 x USB Cables
The Installation Paths of CD Driver
Packing List
Before you begin installing your Compact Board, please make sure that the following materials
have been shipped:
1 x EmCORE-i290H EPIC Compact Board with heat sink
1 x Power cable
1 x Quick Installation Guide
1 x Driver CD
If any of the above items is damaged or missing, contact your vendor immediately.
Windows XP
Driver Path
CHIPSET \EmCORE-i290H\CHIPSET\WinXP\INF 9.1.1.1020
VGA \EmCORE-i290H\GRAPHICS\WinXP\6.14.10.5260
AUDIO \EmCORE-i290H\AUDIO\REALTEK_HD_ALC888\WinXP
LAN \EmCORE-i290H\ETHERNET\WinXP_5794_03162012
Windows 7
Driver Path
CHIPSET \EmCORE-i290H\CHIPSET\Win7\INF 9.1
VGA \EmCORE-i290H\GRAPHICS\Win7
AUDIO \EmCORE-i290H\AUDIO\REALTEK_HD_ALC888\Win7
LAN \EmCORE-i290H\ETHERNET\Win7_7053_03162012

- 3 -
Form Factor EPIC Compact Board
CPU Soldered onboard Intel® Atom N455 1.6GHz, or
D525 1.8GHz processor
Chipset Intel® ICH8M
System Memory Soldered onboard DDR3 2GB SDRAM
Display
Integrated Intel® Graphics Media Accelerator 3150,
Analog RGB/ Single Channel 18-bit LVDS/ Dual
Independent Display
Ethernet 2 x Realtek RTL8111E PCIe Gigabit Ethernet
controllers
I/O Chip Winbond 83627UHG
BIOS AMI PnP Flash BIOS
Audio Realtek ALC886 7.1 Channel HD Audio Codec, Mic-
in/ Line-out
Storage
2 x SATA ports at 300MB/s HDD transfer rate
1 x Ultra ATA, supporting 2 IDE devices
Soldered onboard 2GB NANDrive (Optional)
Serial Port 5 x COM ports (COM1, COM3 ~5: RS-232, COM2:
RS-232/422/485 selectable)
KBMS 1 x 6-pin wafer connector for Keyboard and Mouse
(PS/2 interface via cable)
Universal Serial Bus 8 x USB 2.0 ports
Digital I/O 8-bit programmable Digital Input/Output
Expansion Interface
1 x Mini-card Socket
1 x Mini-PCI Socket
1 x SIM Socket
Operation Temp. -20oC ~ 70oC (-4oF ~ 158oF)
Watchdog Timer 1~255 levels Reset
Dimension (L x W) 165 x 115 mm (6.5” x 4.5” )
Specications

- 4 -
Board Dimensions
Unit: mm

- 5 -
Jumpers/ Connectors Quick Reference
Jumpers
Label Function
JAT1 AT/ATX Power Mode Selection
JBAT1 Clear CMOS Setting
JRS1 COM2 RS-232 / 422 / 485 Selection
JVLCD1 LCD Voltage Selection
Connectors
Label Function
AUDIO1 Audio Connector
COM1 ~ COM5 Serial port Connectors
JCOM1 RS-422/485 Output Connector
DIO1 Digital I/O Connector
EATX1 ATX feature Connector
IDE1 IDE Connector
INV1 LCD Inverter Connector
JFRT1 Switches and Indicators
JBATT1 External Battery Connector
EKBMS1 PS/2 Keyboard & Mouse Connector
LAN1, LAN2 GbE RJ-45 Connectors
LVDS1 LVDS LCD Connector
MC1 PCI Express Mini-Card Slot
MPCI1 Mini-PCI Socket
12VIN1 Aux. ATX +12V Power Connector
SATA1 Serial ATA Connectors
SIM1 SIM Socket
SAPO1
Small 4-pin Power Connectors
USB1~4 USB Port Connectors
VGA1 Analog RGB Connector

- 6 -
Jumpers Location
1
3
C3 C7 C6 C2 C5 C1
10
1
9
2
1
10
9
2
1
4
1 2
3
1
7
14
1
8
1
1
1
1
1
1
6 5
1 2
9
10
1 2
9
10
1 2
9
10
10
9
2 1
10
9
2 1
1 2
9
10
1
124
123
1
2
1715
18
16
51
52
1 2
43 44
230
29 1
DIO1 JFRT1
MPCI1
SIM1 SATA1 SAPO1
12VIN1
JAT1
MC1
JBATT1
JBAT1
LVDS1
INV1
JVLCD1
EKBMS1 USB3 USB4
AUDIO1
JRS1
JCOM1
COM1 IDE1
COM2
COM4 COM3
VGA1COM5
LAN2LAN1
USB1
USB2
10
9
2 1
1
9
10
1
124
123
1
2
1715
18
16
51
52
230
29 1
10
9
1
2
3
4
1
1
1
2
1
2
1
2
1
2
1
21
2
1
2
1
1
1
1
1
1
1
2
1
2
1
2
1
2
JRS11
JBAT12
JAT1 4
JVLCD13

- 7 -
Connectors Location
1
3
C3 C7 C6 C2 C5 C1
10
1
9
2
1
10
9
2
1
4
1 2
3
1
7
14
1
8
1
1
1
1
1
1
6 5
1 2
9
10
1 2
9
10
1 2
9
10
10
9
2 1
10
9
2 1
1 2
9
10
1
124
123
1
2
1715
18
16
51
52
1 2
43 44
230
29 1
DIO1 JFRT1
MPCI1
SIM1 SATA1 SAPO1
12VIN1
JAT1
MC1
JBATT1
JBAT1
LVDS1
INV1
JVLCD1
EKBMS1 USB3 USB4
AUDIO1
JRS1
JCOM1
COM1 IDE1
COM2
COM4 COM3
VGA1COM5
LAN2LAN1
USB1
USB2
10
9
2 1
IDE1
5
C3
C7
C6
C2
C5
C1
1
9
10
1
124
123
1
2
1715
18
16
51
52
10
9
1
2
3
4
1
1
1
2
1
2
1
2
1
2
1
21
2
1
2
1
1
1
1
1
1
1
2
1
2
1
2
1
2
10
COM2
AUDIO1
JCOM1
USB2
USB1
LAN2
LAN1
EATX1
6
SAPO1
12VIN1
SATA1
SIM1
MC1
COM3
7
COM4
8
COM5
9
11
DIO1 USB3 USB4
JBATT1
9
10
12
29
EKBMS1
VGA1
COM1
12
13
14
15
16
18
20
21
24 23 22
28
LVDS1
17
INV1
19
27
29
30
31
32
JFRT1 25
MPCI1 26

- 8 -
Jumpers Connectors
JBAT1: Clear CMOS Setting (2)
Connector type: 2.00mm pitch 1x3-pin headers.
Pin Mode
1-2 Keep CMOS (Default)
23 1
2-3 Clear CMOS
23 1
JVLCD1: LCD Panel Voltage Selection (3)
The voltage of LCD panel could be selected by
JVLCD1 in +5V or +3.3V.
Connector type: 2.00mm pitch 1x3-pin headers.
Pin Voltage
1-2 +5V
23 1
2-3 +3.3V (Default)
23 1
JRS1: COM2 RS-232/422/485 Selection (1)
Connector type: 2.00mm pitch 2x3-pin headers.
Mode RS-232
(Default) RS-422 RS-485
1-2 Short Open Open
3-4 Open Short Open
5-6 Open Open Short
65
21
65
21
65
21
JAT1: AT/ATX Power Mode Selection (4)
Connector type: 2.00mm pitch 1x2-pin headers.
Pin 1-2 Power Mode Selection
Short AT Mode 1 2
Open ATX Mode
(Default)
1 2
I DE1: Primary IDE Connector (5)
Connector type: 2.00mm pitch 2x22-pin box headers.
Pin Desc. Pin Desc.
43 44
1 2
1IDE RESET 2GND
3DATA7 4DATA8
5DATA6 6DATA9
7DATA5 8 DATA10
9DATA4 10 DATA11
11 DATA3 12 DATA12
13 DATA2 14 DATA13
15 DATA1 16 DATA14
17 DATA0 18 DATA15
19 GND 20 N/C
21 REQ 22 GND
23 IO WRITE 24 GND
25 IO READ 26 GND
27 IO READY 28 IDSEL
29 DACK 30 GND
31 IRQ14 32 N/C
33 ADAD1 34 ATA66 DETECT
35 ADAD0 36 ADAD2
37 CS#1 38 CS#3
39 IDEACT 40 GND
41 +5V 42 +5V
43 GND 44 N/C
COM2~5: Serial Port Connectors (7, 8, 9, 10)
Connector type: 2.00mm pitch 2x5-pin box headers.
Pin Desc. Pin Desc.
9 10
1 2
1DCD# 2RXD
3TXD 4DTR#
5GND 6 DSR#
7RTS# 8 CTS#
9RI# 10 N/C
EATX1: ATX Feature Connector (6)
Connector type: 2.54mm pitch 1x3-pin box wafer
connector
Pin Description
1
2
3
1PS-ON
2GND
3 5V_SB

- 9 -
EKBMS1: Keyboard & Mouse Connector (15)
Connector type: 2.0mm pitch 1x6-pin box wafer
connector.
Pin Description
1
2
3
4
5
6
1KB_DATA
2GND
3 MS_DATA
4KB_CLK
5 KB_VCC
6 MS_CLK
AUDIO1: Audio Connector (11)
Connector type: 2.00mm pitch 2x5-pin box headers.
Pin Description Pin Description
9 10
1 2
1 Line Left In 2 Line Right In
3 GND 4GND
5 MIC1 6 MIC2
7 GND 8 GND
9 Line-out Left 10 Line-out Right
JCOM1: RS-422/485 Output Connector (12)
Connector type: 2.00mm pitch 1x4-pin box wafer
connector.
Pin RS-422 RS-485
1
2
3
4
1TX+ DATA+
2TX- DATA-
3 RX+ N/C
4RX- N/C
USB1, 2: Double Stacks USB type A
Connectors (13, 14)
Connector type: double stacks USB type A
connector.
USB
USB
1 2 3 4
1 2 3 4
VGA1: Analog RGB Connector (16)
Connector type: D-Sub 15-pin female.
Pin Desc. Pin Desc.
15
15 11
1RED 9+5V
2GREEN 10 CRT_DETECT
3 BLUE 11 N/C
4N/C 12 D-DATA
5 GND 13 H-SYNC
6 GND 14 V-SYNC
7 GND 15 D-DCLK
8 GND
COM1: Serial Port Connector (18)
Connector type: D-Sub 9-pin male.
Pin Desc. Pin Desc.
15
9
6
6 DSR# 1DCD#
7 RTS# 2RXD
8 CTS# 3 TXD
9RI# 4DTR#
5 GND
LVDS1: LVDS LCD Connector (17)
Connector type: DF-13-30DP-1.25V connector and
supports 18-bit single channel.
Pin Desc. Pin Desc.
1
2930
2
2VDD 1VDD
4 N.C. 3 TX1CLK+
6N.C. 5 TX1CLK-
8 GND 7 GND
10 N.C. 9 TX1D0+
12 N.C. 11 TX1D0-
14 GND 13 GND
16 N.C. 15 TX1D1+
18 N.C. 17 TX1D1-
20 GND 19 GND
22 N.C. 21 TX1D2+
24 N.C. 23 TX1D2-
26 GND 25 GND
28 N.C. 27 N.C.
30 N.C. 29 N.C.

- 10 -
DIO1: Digital I/O Connector (24)
DIO1 is a 8-bit DIO connector w/ onboard 10-pin
headers, supports programmable Input / Output.
Connector type: 2.00 mm pitch 2x5-pin headers
Pin Description Pin Description
109
1 2
1DIO0 2DIO1
3 DIO2 4DIO3
5 DIO4 6 DIO5
7 DIO6 8 DIO7
9+5V 10 GND
INV1: LCD Inverter Connector (19)
Connector type: 2.00mm pitch 1x5-pin box wafer
connector.
Pin Description
1
2
3
4
5
1+12V
2GND
3 Backlight on/off
4Brightness control
5 GND
USB3, 4: USB Connectors (22, 23)
Connector type: 2.00mm pitch 2x5-pin headers.
Pin Desc. Pin Desc.
109
1 2
1+5V 2+5V
3 USBD- 4USBD-
5 USBD+ 6 USBD+
7 GND 8 GND
9GND 10 N/C (Key)
LAN1, 2: GbE RJ-45 connectors (20, 21)
LAN1, LAN2 support Gigabit Ethernet
Connector type: RJ-45
MC1: Mini-Card Socket (27)
52
16
18
2
JBATT1: External Battery connector (28)
Connector type: 2.00mm pitch 1x2-pin box headers.
Pin Description
1
1+3.3V
2GND
SIM1: SIM card socket (29)
12VIN1: ATX +12V Connector (31)
12VIN1 supplies ATX +12V (Vcore).
Pin Desc. Pin Desc.
24
13
2GND 4+12V
1GND 3 +12V
SATA1: Serial ATA Connectors (30)
High speed transfer rates (300MB/s).
1
1
SAPO1: Small 4P Power Connector (32)
Connector type: 2.54mm pitch 1x4-pin wafer one wall
90D connector
Pin Description
1
1+5V
2GND
3 GND
4+12V
JFRT1: Switches and Indicators (25)
It provides connectors for system indicators that
provides light indication of the computer activities
and switches to change the computer status.
Connector type: 2.00mm pitch 2x5-pin headers.
Pin Description Pin Description
109
1 2
1RESET+ 2RESET-
3 POWER_LED+ 4POWER_LED-
5 HDD_LED+ 6 HDD_LED-
7 SPEAKER+ 8 SPEAKER-
9PSON+ 10 PSON-
MPCI1 : Mini-PCI Socket (26)