Arbor Technology Qseven EmQ-i2401 User manual

I
EmQ-i2401
Qseven®CPU Module
User’s Manual
Version 1.1
2019.07

- II -
This page is intentionally left blank.

- i -
Revision History
Version Release Time Description
1.0 2017.06 Initial release
1.1 2019.07 1.4. Inside the Package: Remove Driver CD
from the package.
1.5. Ordering Information: Revise memory
from 8G to 4G.
1.6. Driver Installation Note: Revise
installation description.

- ii -
Contents
Revision History .................................................................................i
Contents.............................................................................................ii
Preface...............................................................................................iv
Copyright Notice .................................................................................... iv
Declaration of Conformity ...................................................................... iv
CE................................................................................................... iv
FCC Class B .................................................................................... v
RoHS ............................................................................................... v
SVHC / REACH .............................................................................. vi
Warning.................................................................................................. vi
Replacing the Lithium Battery ................................................................ vi
Technical Support .................................................................................. vi
Warranty.................................................................................................vii
Chapter 1 - Introduction....................................................................1
1.1. The Product .....................................................................................2
1.2. About this Manual ............................................................................2
1.3. Specications................................................................................... 3
1.4. Inside the Package ..........................................................................4
1.5. Ordering Information ........................................................................4
1.6. Driver Installation Note.....................................................................5
Chapter 2 - Board Overview .............................................................7
2.1. Board Dimensions............................................................................8
2.2. Block Diagram..................................................................................9
2.3. Connector Pin Denition ................................................................10
Chapter 3 - BIOS..............................................................................13
3.1 Main ...............................................................................................15
3.2 Advanced .......................................................................................17
3.2.1 ACPI Settings.......................................................................18
3.2.2 F81899 Super IO Conguration........................................... 19
3.2.3 Hardware Monitor .................................................................20
3.2.4 CPU Conguration............................................................... 21
3.2.5 CSM Conguration ...............................................................22
3.2.6 USB Conguration ...............................................................24
3.3 Chipset........................................................................................... 26
3.3.1 LCD Control ..........................................................................27
3.3.2 HD-Audio Conguration........................................................ 28
3.3.3 PCI Express Conguration ...................................................28
Contents

- iii -
Contents
3.3.4 SATA Drives..........................................................................28
3.3.5 SCC Conguration................................................................ 29
3.3.6 USB Conguration ................................................................29
3.4 Security ..........................................................................................30
3.5 Boot.................................................................................................31
Appendices ......................................................................................33
Appendix A. I/O Port Address Map ......................................................34
Appendix B. Interrupt Request Lines (IRQ) ..........................................35
Appendix C. BIOS Memory Map........................................................... 36
Appendix D: Watchdog Timer (WDT) Setting.......................................37

- iv -
Preface
Copyright Notice
All Rights Reserved.
The information in this document is subject to change without prior notice in
order to improve the reliability, design and function. It does not represent a
commitment on the part of the manufacturer.
Under no circumstances will the manufacturer be liable for any direct, indirect,
special, incidental, or consequential damages arising from the use or inability
to use the product or documentation, even if advised of the possibility of such
damages.
This document contains proprietary information protected by copyright. All rights
are reserved. No part of this manual may be reproduced by any mechanical,
electronic, or other means in any form without prior written permission of the
manufacturer.
Declaration of Conformity
CE
The CE symbol on your product indicates that it is in compliance with the
directives of the Union European (EU). A Certicate of Compliance is available
by contacting Technical Support.
This product has passed the CE test for environmental specications when
shielded cables are used for external wiring. We recommend the use of shielded
cables. This kind of cable is available from ARBOR. Please contact your local
supplier for ordering information.
This product has passed the CE test for environmental specications. Test
conditions for passing included the equipment being operated within an
industrial enclosure. In order to protect the product from being damaged by ESD
(Electrostatic Discharge) and EMI leakage, we strongly recommend the use of
CE-compliant industrial enclosure products.
Warning
This is a class B product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.
Preface

- v -
Preface
FCC Class B
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that
may cause undesired operation.
NOTE:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense.
RoHS
ARBOR Technology Corp. certies that all components in its products are in
compliance and conform to the European Union’s Restriction of Use of Haz-
ardous Substances in Electrical and Electronic Equipment (RoHS) Directive
2002/95/EC.
The above mentioned directive was published on 2/13/2003. The main pur-
pose of the directive is to prohibit the use of lead, mercury, cadmium, hexava-
lent chromium, polybrominated biphenyls (PBB), and polybrominated diphenyl
ethers (PBDE) in electrical and electronic products. Member states of the EU
are to enforce by 7/1/2006.
ARBOR Technology Corp. hereby states that the listed products do not contain
unintentional additions of lead, mercury, hex chrome, PBB or PBDB that ex-
ceed a maximum concentration value of 0.1% by weight or for cadmium exceed
0.01% by weight, per homogenous material. Homogenous material is dened
as a substance or mixture of substances with uniform composition (such as sol-
ders, resins, plating, etc.). Lead-free solder is used for all terminations (Sn(96-
96.5%), Ag(3.0-3.5%) and Cu(0.5%)).

- vi -
Preface
SVHC / REACH
To minimize the environmental impact and take more responsibility to the earth
we live, Arbor hereby conrms all products comply with the restriction of SVHC
(Substances of Very High Concern) in (EC) 1907/2006 (REACH --Registration,
Evaluation, Authorization, and Restriction of Chemicals) regulated by the
European Union.
All substances listed in SVHC < 0.1 % by weight (1000 ppm)
Warning
Single Board Computers and their components contain very delicate
Integrated Circuits (IC). To protect the Single Board Computer and its
components against damage from static electricity, you should always follow the
following precautions when handling it:
1. Disconnect your Single Board Computer from the power source when you
want to work on the inside.
2. Hold the board by the edges and try not to touch the IC chips, leads or
circuitry.
3. Use a grounded wrist strap when handling computer components.
4. Place components on a grounded antistatic pad or on the bag that comes
with the Single Board Computer, whenever components are separated from
the system.
Replacing the Lithium Battery
Incorrect replacement of the lithium battery may lead to a risk of explosion.
The lithium battery must be replaced with an identical battery or a battery type
recommended by the manufacturer.
Do not throw lithium batteries into the trash-can. It must be disposed of in
accordance with local regulations concerning special waste.
Technical Support
If you have any technical difculties, please do not hesitate to call or e-mail our
customer service.
http://www.arbor-technology.com
E-mail:[e-mail]

- vii -
Preface
Warranty
This product is warranted to be in good working order for a period of two years
from the date of purchase. Should this product fail to be in good working order
at any time during this period, we will, at our option, replace or repair it at no
additional charge except as set forth in the following terms. This warranty does
not apply to products damaged by misuse, modications, accident or disaster.
Vendor assumes no liability for any damages, lost prots, lost savings or any other
incidental or consequential damage resulting from the use, misuse of, or inability to
usethisproduct.Vendorwillnotbeliableforanyclaimmadebyanyotherrelatedparty.
Vendors disclaim all other warranties, either expressed or implied, including but
not limited to implied warranties of merchantability and tness for a
particular purpose, with respect to the hardware, the accompanying product’s
manual(s) and written materials, and any accompanying hardware. This limited
warranty gives you specic legal rights.
Return authorization must be obtained from the vendor before returned
merchandise will be accepted. Authorization can be obtained by calling or faxing
the vendor and requesting a Return Merchandise Authorization (RMA) number.
Returned goods should always be accompanied by a clear problem description.

- viii -
This page is intentionally left blank.

- 1 -
1Chapter 1
Introduction
Chapter 1 - Introduction

- 2 -
Introduction
1.1. The Product
• Soldered onboard Intel Apollolake SoC Processor
• Intergrated Gigabit Ethernet
• Dual Channel 24-bit LVDS and 1 x DDI port
• Anti-crash for automatically system BIOS recovering
1.2. About this Manual
This manual is intended for experienced users and integrators with hardware
knowledge of computers. If you are not sure about the description in this manual,
consult your vendor before further handling.
We recommend that you keep one copy of this manual for the quick reference
for any necessary maintenance in the future. Thank you for choosing ARBOR
products.

- 3 -
Introduction
1.3. Specications
Form Factor Qseven®CPU Module
CPU Soldered onboard Intel Celeron®N3350 2.4GHz processor/
Intel Pentium® N4200 2.5GHz processor
System Memory Soldered onboard 8x512Mbx8 chips for supporting DDR3L
4GB memory capacity, upgradable to 8GB
BIOS AMI BIOS, UEFI Code
USB 4 x USB 2.0 ports
2 x USB 3.0 SuperSpeed ports
Expansion Bus 4 x PCIex1 lanes, I2C Interface, SDIO
Storage 2 x Serial ATA ports
Soldered onboard eMMC 5.0 up to 32GB (OEM Request)
Ethernet controller 1 x Intel®i210IT PCIe GbE controller
Audio HD audio link
Graphics Chipset Intergrated in Intel®Gen9 graphic
Graphics Interface
Dual Channel 24-bit LVDS, with resolution up to 1920x1200
1 x DDI port
OS Support Windows 10 64-bit
Linux: Ubuntu
Power Requirement DC 5V, 5VSB
Power Consumption 2A@5V with N4200 (Typical with PBQ-900L)
Operating Temp. -20ºC ~ 85ºC(-4~158ºF)
-20ºC ~ 70ºC for EmQ-i2401D series
Operating Humidity 10 ~ 95% @ 85°C (non-condensing)
Dimension (L x W) 70 x 70 mm (2.76” x 2.76”)

- 4 -
Introduction
1.4. Inside the Package
Before starting with the installation, make sure the following items are shipped.
If any of the items is missing or appears damaged, contact your local dealer or
distributor.
1 x EmQ-i2401 Qseven®CPU Module
1 x Quick Installation Guide
1.5. Ordering Information
EmQ-i2401-N4200 Intel®Pentium®N4200 Qseven R2.0 CPU module w/ 4G
memory soldered on module, -20~85oC
EmQ-i2401-N3350 Intel®Celeron®N3350 Qseven R2.0 CPU module w/ 4G
memory soldered on module, -20~85oC
EmQ-i2401D-N4200
Intel® Pentium® N4200 Qseven R2.0 CPU modulew/ 4G
memory soldered on module, w/ 32GB eMMC, -20~70oC
(OEM Request)
EmQ-i2401D-N3350
Intel® Celeron® N3350 Qseven R2.0 CPU modulew/ 4G
memory soldered on module, w/ 32GB eMMC, -20~70oC
(OEM Request)
PBQ-900L Qseven R2.0 w/ EPIC form factor Carrier Board
HS-2401-F1 Heat Spreader,W/PAD,70*65*8mm
CBK-06-900L-00
Cable kit:
2 x COM cables
1 x USB cable
1 x SATA cable
1 x SATA Power cable
1 x Audio cable

- 5 -
Introduction
1.6. Driver Installation Note
The CPU module supports Windows 10. To install the drivers, please visit our
website at www.arbor-technology.com and download the driver pack from the
product page. If you need driver DVD, please contact your ARBOR sales repre-
sentative.
Windows 10 64-bit
Driver Path
Audio \Apollolake-i240x\Audio\7687_PG436_Win10_Win8.1_Win8_Win7_
WHQLx64
Chipset \Apollolake-i240x\Chipset
Ethernet \Apollolake-i240x\LAN
Graphics \Apollolake-i240x\Graphic
Serial IO \Apollolake-i240x\Serial IO\SerialIO_30.100.1620.02_APL_PV_Win10\x64
TXE \Apollolake-i240x\TXE

- 6 -
This page is intentionally left blank.

- 7 -
2Chapter 2
Board
Overview
Chapter 2 - Board Overview

- 8 -
Board Overview
2.1. Board Dimensions

- 9 -
Board Overview
2.2. Block Diagram
eMMC 5.0 up to 32GB (OEM request) Onboard up to
32GB
DDR3L-1867MT/s, upgradable to 8GB Onboard DDR3L
4GB SDRAM
1 x PCIe x 1 GbE LAN
Giga LAN
Intel i210IT
NXP
PTN3460
SDIO
LPC I/F
SMBus
2 x USB 3.0/ 2.0 host ports
2 x USB 2.0 host ports
HD Audio Link
SATA0, 1 6GB/s ports
I2C
1 x DP (DDI0)
eDP Dual Channel 24-bit LVDS
4 x PCIex1
Q7 Golden Finger
Intel®
Pentium N4200
Celeron N3350
SoC

- 10 -
Board Overview
2.3. Connector Pin Denition
Pin Signal Pin Signal
1 GND 2 GND
3 LAN1_MDI3- 4 LAN1_MDI2-
5 LAN1_MDI3+ 6 LAN1_MDI2+
7 LAN_LINK100# 8 LAN_LINK_1000#
9 LAN1_MDI1- 10 LAN1_MDI0-
11 LAN1_MDI1+ 12 LAN1_MDI0+
13 LED_LINK# 14 LAN_ACT#
15 GBE_CTREF (N/C) 16 SLP_S4#
17 WAKE# 18 SLP_S3#
19 SUS_STAT# 20 Q7_PWR_BTN#
21 SLEEP# 22 LID#
23 GND 24 GND
KEY KEY
25 GND 26 CB_PWRGD
27 Q7_BATLOW# 28 Q7_RSTBTN#
29 SATA_TXP0_C 30 SATA_TXP1_C
31 SATA_TXN0_C 32 SATA_TXN1_C
33 Q7_HDD_ACT# 34 GND
35 SATA_RXP0_C 36 SATA_RXP1_C
37 SATA_RXN0_C 38 SATA_RXN1_C
39 GND 40 GND
41 BIOS_DISABLE# 42 SD_CLK#
43 SD_CD# 44 SDIO_LED (N/C)
45 SD_CMD 46 SD_WP
47 SD_PWR# 48 SD_DATA1
49 SD_DATA0 50 SD_DATA3
51 SD_DATA2 52 SDIO_DAT5 (N/C)
53 SDIO_DAT4 (N/C) 54 SDIO_DAT7 (N/C)
55 SDIO_DAT6 (N/C) 56 RSVD (N/C)
57 GND 58 GND
59 Q7_AZ_SYNC 60 SMB_CLK_RESUME
61 Q7_AZ_RST# 62 SMB_DATA_RE-
SUME
63 Q7_AZ_BIT_CLK 64 Q7_SMB_ALERT#
Pin Signal Pin Signal
65 Q7_AZ_SDATA_IN 66 I2C_CLK0
67 Q7_AZ_SDATA_OUT 68 I2C_DATA0
69 THRM# 70 WDTRIG#
71 THRMTRIP# 72 WDOUT
73 GND 74 GND
75 USB3TXN0 76 USB3_RXN0
77 USB3TXP0 78 USB3_RXP0
79 USB_6_7_OC# (N/C) 80 USB_4_5_OC#(N/C)
81 USB3TXN1 82 USB3_RXN1
83 USB3TXP1 84 USB3_RXP1
85 USB_OC2/3 86 USB_OC0/1
87 USB_3N 88 USB_2N
89 USB_3P 90 USB_2P
91 USB_CC (N/C) 92
Q-7_USB_ID
93 USB_1N 94 USB_0N
95 USB_1P 96 USB_0P
97 GND 98 GND
99 LVDS_A0+ 100 LVDS_B0+
101 LVDS_A0- 102 LVDS_B0-
103 LVDS_A1+ 104 LVDS_B1+
105 LVDS_A1- 106 LVDS_B1-
107 LVDS_A2+ 108 LVDS_B2+
109 LVDS_A2- 110 LVDS_B2-
111 Q7_VDDEN 112 Q7_BKLTEN
113 LVDS_A3+ 114 LVDS_B3+
115 LVDS_A3- 116 LVDS_B3-
117 GND 118 GND
119 LVDS_A_CLK+ 120
LVDS_B_CLK+
121 LVDS_A_CLK- 122 LVDS_B_CLK-
123 Q7_LCD_BKLT_CTRL 124 GP_1-Wire_Bus
(N/C)
125 LVDS_I2C_DAT 126
eDP0_HPD#/LVDS_
BLC_DAT (N/C)
127 LVDS_I2C_CLK 128
eDP1_HPD#/LVDS_
BLC_CLK (N/C)
129 CAN0_TX (N/C) 130 CAN0_RX (N/C)