Arbor Technology Qseven EmQ-i230J User manual

I
EmQ-i230J
Qseven®CPU Module
User’s Manual
Version 1.0
2020.06

- II -
This page is intentionally left blank.

- i -
Revision History
Version Release Time Description
1.0 2020.06 Initial release

- ii -
Contents
Revision History .................................................................................i
Contents.............................................................................................ii
Preface...............................................................................................iv
Copyright Notice .................................................................................... iv
Declaration of Conformity ...................................................................... iv
CE................................................................................................... iv
FCC Class A .................................................................................... v
RoHS ............................................................................................... v
SVHC / REACH .............................................................................. vi
Warning.................................................................................................. vi
Replacing the Lithium Battery ................................................................ vi
Technical Support .................................................................................. vi
Warranty.................................................................................................vii
Chapter 1 - Introduction....................................................................1
1.1. Features........................................................................................... 2
1.2. About this Manual ............................................................................2
1.3. Specications................................................................................... 3
1.4. Inside the Package ..........................................................................4
1.5. Ordering Information ........................................................................5
1.6. Optional Accessories .......................................................................5
1.7. Driver(7.1A) Installation Note........................................................... 6
Chapter 2 - Board Overview .............................................................7
2.1. Board Dimensions............................................................................8
2.2. Block Diagram..................................................................................9
2.3. Connector Pin Denition ................................................................ 11
Chapter 3 - BIOS..............................................................................13
3.1. Main ...............................................................................................15
3.2. Advanced .......................................................................................16
3.2.1. Boot Conguration ...............................................................17
3.2.2. PCI Express Conguration ..................................................17
3.2.3. USB Conguration ...............................................................17
3.2.4. Audio Conguration .............................................................18
3.2.5. LPSS & SCC Conguration .................................................18
3.2.6. Miscellaneous Conguration................................................ 18
3.2.7. Security Conguration .........................................................19
3.2.8. Video Conguration .............................................................19
3.2.9. SATA Conguration..............................................................22
3.2.10. ACPI Table/Feature Control ............................................... 22
3.2.11. CPU Temperature ..............................................................22
Contents

- iii -
Contents
3.2.12. SIO FINTEK81866D ..........................................................23
3.3. Security ..........................................................................................24
3.4. Power............................................................................................. 25
3.5. Boot................................................................................................26
3.6. Exit .................................................................................................28

- iv -
Preface
Copyright Notice
All Rights Reserved.
The information in this document is subject to change without prior notice in
order to improve the reliability, design and function. It does not represent a
commitment on the part of the manufacturer.
Under no circumstances will the manufacturer be liable for any direct, indirect,
special, incidental, or consequential damages arising from the use or inability
to use the product or documentation, even if advised of the possibility of such
damages.
This document contains proprietary information protected by copyright. All rights
are reserved. No part of this manual may be reproduced by any mechanical,
electronic, or other means in any form without prior written permission of the
manufacturer.
Declaration of Conformity
CE
The CE symbol on your product indicates that it is in compliance with the
directives of the Union European (EU). A Certicate of Compliance is available
by contacting Technical Support.
This product has passed the CE test for environmental specications when
shielded cables are used for external wiring. We recommend the use of shielded
cables. This kind of cable is available from ARBOR. Please contact your local
supplier for ordering information.
This product has passed the CE test for environmental specications. Test
conditions for passing included the equipment being operated within an
industrial enclosure. In order to protect the product from being damaged by ESD
(Electrostatic Discharge) and EMI leakage, we strongly recommend the use of
CE-compliant industrial enclosure products.
Warning
This is a class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.
Preface

- v -
Preface
FCC Class A
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that
may cause undesired operation.
NOTE:
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense.
RoHS
ARBOR Technology Corp. certies that all components in its products are in
compliance and conform to the European Union’s Restriction of Use of Haz-
ardous Substances in Electrical and Electronic Equipment (RoHS) Directive
2002/95/EC.
The above mentioned directive was published on 2/13/2003. The main pur-
pose of the directive is to prohibit the use of lead, mercury, cadmium, hexava-
lent chromium, polybrominated biphenyls (PBB), and polybrominated diphenyl
ethers (PBDE) in electrical and electronic products. Member states of the EU
are to enforce by 7/1/2006.
ARBOR Technology Corp. hereby states that the listed products do not contain
unintentional additions of lead, mercury, hex chrome, PBB or PBDB that ex-
ceed a maximum concentration value of 0.1% by weight or for cadmium exceed
0.01% by weight, per homogenous material. Homogenous material is dened
as a substance or mixture of substances with uniform composition (such as sol-
ders, resins, plating, etc.). Lead-free solder is used for all terminations (Sn(96-
96.5%), Ag(3.0-3.5%) and Cu(0.5%)).

- vi -
Preface
SVHC / REACH
To minimize the environmental impact and take more responsibility to the earth
we live, Arbor hereby conrms all products comply with the restriction of SVHC
(Substances of Very High Concern) in (EC) 1907/2006 (REACH --Registration,
Evaluation, Authorization, and Restriction of Chemicals) regulated by the
European Union.
All substances listed in SVHC < 0.1 % by weight (1000 ppm)
Warning
Single Board Computers and their components contain very delicate
Integrated Circuits (IC). To protect the Single Board Computer and its
components against damage from static electricity, you should always follow the
following precautions when handling it:
1. Disconnect your Single Board Computer from the power source when you
want to work on the inside.
2. Hold the board by the edges and try not to touch the IC chips, leads or
circuitry.
3. Use a grounded wrist strap when handling computer components.
4. Place components on a grounded antistatic pad or on the bag that comes
with the Single Board Computer, whenever components are separated from
the system.
Replacing the Lithium Battery
Incorrect replacement of the lithium battery may lead to a risk of explosion.
The lithium battery must be replaced with an identical battery or a battery type
recommended by the manufacturer.
Do not throw lithium batteries into the trash-can. It must be disposed of in
accordance with local regulations concerning special waste.
Technical Support
If you have any technical difculties, please do not hesitate to call or e-mail our
customer service.
http://www.arbor-technology.com
E-mail:[e-mail]

- vii -
Preface
Warranty
This product is warranted to be in good working order for a period of two years
from the date of purchase. Should this product fail to be in good working order
at any time during this period, we will, at our option, replace or repair it at no
additional charge except as set forth in the following terms. This warranty does
not apply to products damaged by misuse, modications, accident or disaster.
Vendor assumes no liability for any damages, lost prots, lost savings or any other
incidental or consequential damage resulting from the use, misuse of, or inability to
usethisproduct.Vendorwillnotbeliableforanyclaimmadebyanyotherrelatedparty.
Vendors disclaim all other warranties, either expressed or implied, including but
not limited to implied warranties of merchantability and tness for a
particular purpose, with respect to the hardware, the accompanying product’s
manual(s) and written materials, and any accompanying hardware. This limited
warranty gives you specic legal rights.
Return authorization must be obtained from the vendor before returned
merchandise will be accepted. Authorization can be obtained by calling or faxing
the vendor and requesting a Return Merchandise Authorization (RMA) number.
Returned goods should always be accompanied by a clear problem description.

- viii -
This page is intentionally left blank.

- 1 -
1Chapter 1
Introduction
Chapter 1 - Introduction

- 2 -
Introduction
1.1. Features
• Fanless Design
• Soldered Onboard Intel®Atom™ Processor E3800 family
• Integrated Gigabit Ethernet
• Soldered Onboard eMMC(OEM Request)
• Dual Channels 24-bit LVDS, DDI Port
• Wide Range Operating Temp.: -40 ~ 85ºC
1.2. About this Manual
This manual is intended for experienced users and integrators with hardware
knowledge of computers. If you are not sure about the description in this manual,
consult your vendor before further handling.
We recommend that you keep one copy of this manual for the quick reference
for any necessary maintenance in the future. Thank you for choosing ARBOR
products.

- 3 -
Introduction
1.3. Specications
Form Factor Qseven®CPU Module
Processor
Soldered onboard Intel® Atom™ Processor E3800 family
E3825 1.33GHz or
E3845 1.91GHz
Memory Soldered onboard 2GB/4GB DDR3L SDRAM
BIOS Insyde BIOS
Watchdog 1~255 levels reset
USB 2.0 8 x USB 2.0 ports
Expansion 3 x PCIex1, I2C,SDIO
Storage 2 x Serial ATA ports with 300MB/s HDD transfer rate
up to 64GB eMMC 4.5 (OEM Request)
Ethernet 1 x Intel®i210IT PCIe GbE controller
Audio HD Link
Graphics Chipset Integrated Intel®Gen7 Graphic
Graphics Interface
Analog RGB/DVI: Analog RGB (via RSV pin), with
resolution up to 2048x1536
LCD: Dual Channel 24-bit LVDS, with resolution up to
1920x1200
DDI port: 1 x DDI port
OS Support
Windows 7 32-bit/64-bit
Windows 10 64-bit
Linux: Ubuntu
Power Requirement DC 5V, 5VSB
Power Consumption 0.94A@12V with E3825
(Typical, with PBQ-3000)
Operating Temp. -40 ~ 85°C (-40 ~ 185°F)
Operating Humidity 10 ~ 95% @ 85°C (non-condensing)
Dimension (L x W) 70 x 70 mm (2.76” x 2.76”)

- 4 -
Introduction
1.4. Inside the Package
Before starting with the installation, make sure the following items are shipped.
If any of the items is missing or appears damaged, contact your local dealer or
distributor.
1 x EmQ-i230J Qseven®CPU Module
1 x Quick Installation Guide

- 5 -
Introduction
1.5. Ordering Information
EmQ-i230J-WT-E3825-2G Intel®Atom™ Processor E3825 Qseven®CPU module with 2GB
memory soldered on module
EmQ-i230J-WT-E3845-2G Intel®Atom™ Processor E3845 Qseven®CPU module with 2GB
memory soldered on module
EmQ-i230J-WT-E3825-4G Intel®Atom™ Processor E3825 Qseven®CPU module with 4GB
memory soldered on module
EmQ-i230J-WT-E3845-4G Intel®Atom™ Processor E3845 Qseven®CPU module with 4GB
memory soldered on module
EmQ-i230JD-WT-E3825-2G Intel®Atom™ Processor E3825 Qseven®CPU module with 2GB
memory soldered on module,w/ 32GB eMMC (OEM Request)
EmQ-i230JD-WT-E3845-2G Intel®Atom™ Processor E3845 Qseven®CPU module with 2GB
memory soldered on module,w/ 32GB eMMC (OEM Request)
EmQ-i230JD-WT-E3825-4G Intel®Atom™ Processor E3825 Qseven®CPU module with 4GB
memory soldered on module,w/ 32GB eMMC (OEM Request)
EmQ-i230JD-WT-E3845-4G Intel®Atom™ Processor E3845 Qseven®CPU module with 4GB
memory soldered on module,w/ 32GB eMMC (OEM Request)
1.6. Optional Accessories
HS-230J-F1 Heat spreader 70x65x8mm
HS-0000-W3 Universal evaluation heat sink kit with thermal pad 70x65x29.8mm,
only used on a at-type heat spreader
PBQ-3000 Qseven® R1.2 carrier board in EPIC form factor
CBK-06-3000-00
Cable kit
1 x USB cable
1 x USB2 cable
2 x Serial port cables
1 x SATA cable
1 x SATA power cable

- 6 -
Introduction
1.7. Driver(7.1A) Installation Note
To install the drivers, please visit our website at www.arbor-technology.
com and download the driver pack from the product page.
Windows 7
Driver Path
Audio \EmQ-i230J\Win7\Audio\32bit_Win7_R273
\EmQ-i230J\Win7\Audio\64bit_Win7_R273
Chipset \EmQ-i230J\Win7\Chipset
Ethernet \EmQ-i230J\Win7\LAN\PROWin32
\EmQ-i230J\Win7\LAN\PROWinx64
Graphics \EmQ-i230J\Win7\Graphic\32bit
\EmQ-i230J\Win7\Graphic\64bit
Processor
IO \EmQ-i230J\Win7\Processor IO\Win7_IO_Drivers
TXE Patch \EmQ-i230J\Win7\TXE Patch
Windows 10
Driver Path
Audio \EmQ-i230J\Win10\Audio\Win32
\EmQ-i230J\Win10\Audio\Win64
GPIO I2C \EmQ-i230J\Win10\GPIO I2C\windows10 32_64
Ethernet \EmQ-i230J\Win10\LAN\Win32_64
Graphics \EmQ-i230J\Win10\Graphic\Win32\win10_36_15_0_1091
\EmQ-i230J\Win10\Graphic\Win64\win10_37_15_0_1091
INF \EmQ-i230J\Win10\INF\Win32_64
TXE Patch \EmQ-i230J\Win10\TXE

- 7 -
2Chapter 2
Board
Overview
Chapter 2 - Board Overview

- 8 -
Board Overview
2.1. Board Dimensions
54
70
Φ2,7* Φ6.35
2,5
59,9
18
35,9
52
70
37,39
3
67
1,2
Unit:mm

- 9 -
Board Overview
2.2. Block Diagram
I2C
Q7 Golden Finger
Dual Channels 24-bit LVDS
NXP
PTN3460
3 x PCIex1
5 x USB 2.0 Ports
1 x USB 2.0 GL845G
LPC I/F
3 x USB 2.0 ports
HD Audio Link
SATA0
SATA1
1 x PCIe x 1 GbE
GbE Controller
Intel i210IT
Analog R.G.B.
DDR3L-1066/1333 MT/s Onboard DDR3L
2GB/4GB
1 x DDI port (DDI1)
1 x eDP port
Intel®
Atom
Processor
E3800
family
eMMC 4.5 Onboard eMMC
up to 64GB
OEM Request

- 10 -
Board Overview
Heat Spreader Installation
To install the heat spreader:
See the illustration below. Mount the heat spreader to the board. Fix the heat
spreader in place with fours screws.