AREBOS AR-HE-HS2500 User manual

User’s Manual –AREBOS Infrared heater 2500 W
1
Infrared heater 2500 W
AR-HE-HS2500/B/W/WB
*product can differ depending on variety
Please follow all security measures in this user´s manual to ensure a secure use.
Thank you for trusting in AREBOS.

User’s Manual –AREBOS Infrared heater 2500 W
2
Contents
1. Safety instructions ..........................................................3
1.1 Symbols ................................................................................................................................... 3
1.2 General instructions ................................................................................................................ 3
1.3 General safety distances ............................................................................................................... 5
1.4 Distances to the bathtub, sink or other sanitary facilities ............................................................ 5
2. Use .................................................................................5
3. Parts List .........................................................................6
4. Technical data.................................................................6
5. Installation......................................................................7
5.1 Setting up the device..................................................................................................................... 7
5.2 Wall mounting ............................................................................................................................... 7
6. Commissioning................................................................9
7. Cleaning, maintenance and service .................................9
7.1 Maintenance.................................................................................................................................. 9
7.2 Cleaning ......................................................................................................................................... 9
7.3 Exemplary cleaning of the reflector ............................................................................................ 10
7.4 Service and repair........................................................................................................................ 11
8. Troubleshooting............................................................11
9. Disposal instructions.....................................................11
9.1 Disposal of the packaging............................................................................................................ 11
9.2 Disposal of waste equipment...................................................................................................... 11
9.3 Meaning of the "dustbin"............................................................................................................ 12
EU Declaration of Conformity ............................................13
Please read and save these instructions. Read through this user’s manual carefully before using
product. Protect yourself and others by observing all safety information, warnings and cautions.
Failure to comply with instructions could result in personal injury and/ or damage to product or
property. Please retain instructions for future reference.

User’s Manual –AREBOS Infrared heater 2500 W
3
1.Safety instructions
1.1 Symbols
1.2 General instructions
•This device is manufactured in compliance with safety regulations. Usage against the roles
causes harm to person and device. Please read the User Manual carefully before operating
the device. You will find important information inside the User Manual regarding mounting,
safety, usage and maintenance.
•Thus, you will both protect yourself and prevent the device from coming to harm.
•If the power cord is damaged, it must be replaced by the manufacturer or its service agency
or an equally qualified person to prevent a dangerous situation.
•It must be checked whether there are breaks or deformations on the heating element
present on the device. If glass pipes are damaged, the heater must not be used and the
customer service needs to be contacted.
•It must be ensured that the main power is 220-240 V AC, 50/60 Hz and the power line is
connected to the fuse. Mains safety must be checked. Fuse must be 16 Amperes. Please use
a time-lag fuse!
Your device must be used with grounded socket and grounded socket must be outside the
heater area and the hot surface.
•Warning! Before first switching on, be sure to remove the protective caps!
•Also, it must be checked whether the socket is loose or damaged. Because loose sockets
damage the device and the power main.
•Power cord must not be left on the hot body of the device or near it.
•If the device is not used, moved to another location, cleaned or calibrated for an extended
period of time, unplug the device from the wall outlet. Make sure that the unit has cooled
down completely.
•The device is not intended for use by persons (including children) with reduced physical,
sensory and mental capabilities or lack of experience and knowledge, unless they have been
given supervision or instruction concerning the use of the appliance by a person responsible
for their safety.
•Make sure that the device does not come into contact with wet hands or water under any
circumstances.
•If your device will not be used for a long period of time, if cleaning or maintenance will be
conducted, the device must be unplugged. It must be ensured that the device has cooled
down.
•Ensure that the power cord and the plug is clean and dust-free prior to use.
•Do not pull on the cable while pulling out or plugging in the power plug, always hold the plug
By means of a CE marking, it can be recognized that a product complies with the
legal requirements of European legal standards and therefore may be traded
within the European Community.
This product must not be disposed of with household waste!

User’s Manual –AREBOS Infrared heater 2500 W
4
itself. Do not touch the power cord with wet hands. The power cord must not be structurally
altered, otherwise it may cause malfunction, electric shock or even fire.
•Do not make knots or kinks in the power cord, as this can quickly lead to an electric shock or
even fire. Do not place the supply cable under heavy objects, as this can quickly lead to an
electric shock or even fire.
•Do not turn off your heater only by unplugging it or shutting down the fuse, but always use
the switch/rotating wheel on the heating element.
•Covering or improper installation may cause a fire, so the unit should always be kept clear
during operation.
•The flame protector of this heater is for preventing direct access to the heater elements and
must be in place while the heater is in use.
•Do not use your device outside its intended purpose. (Do not use it for drying clothes or
keeping animals or plants warm.)
•Never try to clean the device with solvents or flammable liquids. (It may cause electric shock
or fire!)
•Do not operate the device while sleeping or while away from where the device is located.
•Refrain from using extending cord, it might cause fire due to overheating. If you have to use
an extending cord, the cable cross section must be at least 2 mm² (14 AWG).
•The device should only be used on level and smooth surfaces, but never in unstable or unsafe
locations.
•Do not try to disassemble or repair the heater. Never shake the heater.
•There must be at least 39.4 in (1 m) of space between the heater and curtains, wood,
cardboard, textiles, any other materials, living organisms and other equipment. There is a
risk of fire!
•A faint smoke and smell might form during the first use of your device. This is normal. Do not
touch the device while running or right after operation.
•Device must be unplugged before cleaning. Do not clean your device with a steam cleaner.
•Children should be supervised to ensure that they do not play with the appliance. Flame
protector does not provide a full protection for small children and handicapped people.
•Keep the device dry and protect it from moisture or wetness.
•Do not cover the device to avoid overheating. Do not block the ventilation slots and the areas
around the wires.
•This device is for children from 8 years or older. In addition, for people who are physically,
sensory or mentally limited, if they have been explained in advance the correct use of the
device and then they can use it safely, but also can estimate the potential dangers.
•Children should not play with this device!
•Cleaning and maintenance should not be done by children without supervision!
•This device is for children from 8 years or older. In addition, for people who are physically,
sensory or mentally limited, if they have been explained in advance the correct use of the
device and can use it safely, but also can estimate the potential dangers.
•Do not put fingers or other objects through the protective grid.
•The device must not be placed directly under a socket.
•Do not move the device while it is in operation. After switching off the appliance always wait
until it has cooled down before you touch it. Do not use the heater in conjunction with a
thermostat or similar temperature controller.
•When the desired heating level has been set, do not leave the heater in confined rooms
where there are people who cannot leave the room.
•Keep flammable materials (gasoline, alcohol, etc.) at least 300 in (7.60 m) away and do not
operate the device near motor vehicles (cars, motorcycles, etc.). Do not place flammable
materials such as solvents, thinners, etc. on or near the heater or nearby, or any household

User’s Manual –AREBOS Infrared heater 2500 W
5
electrical appliances.
1.3 General safety distances
•There must be at least 29.5 in (0.75 m) distance between the heater and the ceiling.
•The distance of the device from the ground must be at least 71 in (1.80 m) when wall-
mounted.
•There must be at least 1 meter of space between the heater and curtains, wood, cardboard,
textiles, any other materials, living organisms and other equipment.
Note: No vertical mounting possible, picture is only for distance clarification!
1.4 Distances to the bathtub, sink or other sanitary facilities
•For the use of the heater in the bathroom, the following should be noted:
- In the bathroom, the device should be mounted so that during bathing or showering the
switch or other parts are for no one - at no time - accessible.
- The mains plug should be at least 23.6 in (0.6 m) away, for extra safety, over 1 meter from
the bath, sink or any other sanitary equipment.
2.Use
•The heater heats with the latest infrared technology. Pleasant warmth, as you know it
through warm sunlight. The new infrared radiation does not primarily heat the air, but the

User’s Manual –AREBOS Infrared heater 2500 W
6
people and objects that are within reach. As a result, the infrared radiation is perceived as
very pleasant and can be very effective. Only through this mode of action infrared radiators
are particularly suitable for outdoor use.
3.Parts List
1. Switch (Rotating wheel)
2. Heating element
3. Bracket
4. Cable
5. Safety bar
6. Grille /flame protector
4.Technical data
Model
AR-HE-HS2500
AR-HE-HS2500B
AR-HE-HS2500W
AR-HE-HS2500WB
Variety
with base
wall mounted
EAN
4260551587351
4260627427475
4260627424269
4260627427482
Power
2500 W
2500 W
Voltage
220 - 240 V
220 - 240 V
Frequency
50 Hz
50 Hz
Cable length
2 m
2 m
Protection class
IP34
IP34
Size telescopic pole
110 - 180 cm
n.a.
Weight
4,6 kg
2,75 kg
Dimensions
86,5 x 70 x (110-180) cm
87 x 19 x 9cm

User’s Manual –AREBOS Infrared heater 2500 W
7
5.Installation
5.1 Setting up the device
Hints:
•Do not place the device in the immediate vicinity of curtains and other flammable materials.
•When setting up the device, ensure a secure, horizontal and stable position.
•Make sure that the device is never placed outdoors near water (swimming pool, pond, etc.).
•The infrared heater must not be installed and operated in environments containing acids,
steams, explosive or flammable gases.
Procedure
•Loosen the fixed knob on the pipe, place the product holder on the pipe component as
shown
5.2 Wall mounting
Hints:
•Attention! The device must be installed on solid surfaces such as concrete and metal. Never
install on flammable surfaces!
•For wall mounting, check at the intended mounting location of the holder whether there are
pipes or lines in the wall.
•Install the heater strictly in a horizontal position, i.e. parallel to the ground!
•Set up the radiant heater at a reasonable angle.
•Prevent heat loss through the windows.
•If you want to install two or more heaters in an integrated heating system, consult a qualified
professional for installation.
Procedure
•There are 4 brackets and fasteners used with the heater. Furthermore, in the canal of the
back side of the heater there are 4 square fastener washers 0.984 x 0.984 in ( 25 x 25mm).
Relieve square washers and fasten 2 brackets to the canal of the backside of the heater by
the help of screws.

User’s Manual –AREBOS Infrared heater 2500 W
8
•Fasten the brackets at the appropriate distance of each other (17.7 - 21.7 in (45-55 cm)).
•Two other brackets are fastened by the help of fasteners at the appropriate distance on the
wall parallel to the floor (at least 71 in (1.80 m) from the floor and at least 29.5 in (0.75 m)
from the ceiling).
•Join the brackets on the heater with the brackets, fastened on the wall, with help of figured
screw-nuts. Install the heater under necessary angle (in the direction to the area being
heated).

User’s Manual –AREBOS Infrared heater 2500 W
9
•Electric wiring for the heater has to be done by the qualified specialist.
6.Commissioning
•Plug the cable of the heater into a household, earthed socket.
•Then turn the switch/rotating wheel clockwise to turn on the heater.
•To turn off the heater turn it counterclockwise.
7.Cleaning, maintenance and service
7.1 Maintenance
•It is very important to perform careful and regular maintenance of the device in accordance
with the recommendations made in this manual so that it can run efficiently for a long time.
In case there is a problem with your heater, please contact a qualified specialist.
•Before maintenance or cleaning work, the device must be disconnected from the electricity
grid.
•Once a month, a check should be made as to whether there is any potential contamination.
•If the infrared heater is dirty, careful cleaning should be performed. See point Cleaning.
•Of course, the above checks are always dependent on how much pollution is present at the
respective location of the device.
•The reflector and the tube should also be visually inspected for deformation or damage. In
the case of conspicuous deformations or glass breakage, please contact a qualified specialist
to take the necessary steps.
•The power cord and plug must also be checked while the unit is being cleaned. If the power
cord or plug shows any deformation or damage, please contact a qualified professional
immediately.
7.2 Cleaning
•Attention! Regular and thorough cleaning ensures longevity and optimum performance.
•The unit must be switched off and the power cord disconnected from the circuit. In addition,
it should cool sufficiently before cleaning.
•If the tube is dirty, clean it with dry compressed air without removing the protective grid.

User’s Manual –AREBOS Infrared heater 2500 W
10
Do not attempt to clean the device using solvents or other flammable liquids. (This can cause
an electric shock or fire). Also, do not use a steam cleaner.
•Clean the outside surface of the unit with a soft cotton cloth, microfiber cloth or a soft brush.
•Do not use corrosive cleaning agents or solvents to clean the infrared heater. These can
damage the surface and components.
•Turn on the unit again when it is completely dry and clean.
•If the device is to be stored for longer, cover it with a protective cover to avoid dust on the
device and sensitive points. Always disconnect the power plug and switch off the power!
7.3 Exemplary cleaning of the reflector
•Disconnect the power adapter cable from the electrical outlet.
•Let the heater cool down.
•Remove the heater from the safety bar.
•Wipe off the reflector with a soft cloth that has been treated with detergent.
•Do not use detergents that can damage the reflector. The wiping must be done very carefully
without scratches.
Make sure the heater does not have these errors:
•Check if the thermostat can be switched on or off.
•Check that the heater is properly connected to the electrical wiring.

User’s Manual –AREBOS Infrared heater 2500 W
11
•Check the intactness of the electrical wiring.
7.4 Service and repair
•If there is any damage or discrepancy on your device, it must only be checked and repaired
by a specialist. This can be a recognized electrician. Damage or malfunctions that occur as a
result of unauthorized repair, as well as changes to the device, misuse, negligence and
improper and inadequate maintenance invalidate the warranty. The manufacturer cannot be
held liable.
8.Troubleshooting
Problem
Cause
Solution
The heater doesn´t work.
- No voltage.
- Incorrect position of the
switch.
- Incorrect installation or
instructions not followed
correctly.
- Check the socket and the fuse.
Check whether the mains plug,
including the one inside the
standpipe and the burner head, has
been correctly inserted.
- Check that the device's switch is in
the correct position.
- Make sure that you have followed
the instructions in the manual
correctly. If the problems still persist,
contact a qualified specialist.
The device is connected to
a power outlet, but the
heating sheets are not lit.
- The device is not switched
on.
- The tilt protection has
triggered.
- Heating sheet defective.
- Check the setting on the switch
and, if necessary, turn the switch
clockwise to switch on the device.
- Check the stand of the device. The
tilt protection triggers automatically
from a 45 ° inclination and switches
off the heating sheets. Put the device
upright again.
- Have the broken heating sheet
replaced by an electrician.
9.Disposal instructions
9.1 Disposal of the packaging
•Please make reference to the guidelines and standards for appropriate disposal of the packaging
valid in your region. In part, the package may consist of plastic bags - watch this respect, with
special care to ensure that this is not out of the reach of children. There is a risk of suffocation!
9.2 Disposal of waste equipment
•Equipment must be disposed of in accordance with the rules and regulations of the local waste
disposal.

User’s Manual –AREBOS Infrared heater 2500 W
12
9.3 Meaning of the "dustbin"
The symbol of the crossed-out dustbin on batteries or accumulators indicates
that they must not be disposed of with household waste at the end of their
service life. If batteries or accumulators contain mercury (Hg), cadmium (Cd) or
lead (Pb), you will find the respective chemical symbol below the symbol of the
crossed-out trash can. You are legally obliged to return old batteries and
accumulators after use. You can do this free of charge in a retail store or at
another collection point near you. Addresses of suitable collection points can be
obtained from your city or local government.
Batteries may contain substances that are harmful to the environment and
human health. Special care must be taken when handling batteries containing lithium due to the
particular risks involved. The separate collection and recycling of old batteries and accumulators is
intended to avoid negative effects on the environment and human health.
Please avoid the generation of waste from old batteries as much as possible, e.g. by preferring
batteries with a longer life or rechargeable batteries. Please avoid littering public spaces by not
carelessly leaving batteries or electrical and electronic equipment containing batteries. Please
consider ways to reuse a battery instead of disposing of it, for example by reconditioning or repairing
the battery.
You can also find more information on the Battery Act on the Internet at www.batteriegesetz.de.
You can also visit our website at www.arebos.de to find out about other return options we have
created.
Our customer service number: [phone]
Canbolat Vertriebs GmbH • Gneisenaustraße 10-11 • 97074 Würzburg

User’s Manual –AREBOS Infrared heater 2500 W
13
EU Declaration of Conformity
We,
Canbolat Vertriebs GmbH, Gneisenaustraße 10-11, 97074 Würzburg, Germany,
Hereby declare that the product named below, seen its design and construction as well as according to our
sales, has been complied with the relevant and basic health and safety EU-requirements.
Name of the product: Infrared heater 2500 W (with/ without base)
Model Nr.: AR-HE-HS2500 /AR-HE-HS2500W / AR-HE-HS2500B / AR-HE-HS2500WB
Art. Nr.: 4260551587351/ 4260627424269/ 4260627427475/ 4260627427482
If the product has any modification not allowed by us, this declaration loses its validity.
Tested acc. to:
Low Voltage Directive 2014/35/EC
Electromagnetic Compatibility 2014/30/EC
ROHS directive 2011/65(EU) and 2015/863 (EU)
EU Standard:
EN 60335-2-30:2009 + A11:2012
EN 60335-1:2012 + A11:2014 + A13:2017 + A1:2019 + A14:2019 + A2:2019
EN 62233:2008
EN55014-1:2017
EN55014-2:2015
EN61000-3-2:2014
EN61000-3-3:2013
Date/Manufacturer Signature/Location: Würzburg, 06.05.2021
Identification of the signatory:
Korhan Canbolat, head of the company
Authorised representative for the technical documentation:
Korhan Canbolat
Office address:
Canbolat Vertriebs GmbH
Gneisenaustraße 10-11
D-97074 Würzburg
Return address can be found in the imprint: https://www.arebos.de/impressum/
VAT identification number: DE 263752326
Court of the Commercial Register is Würzburg, HRB 10082
WEEE Reg.-No. DE 61617071