Argos Home 609/1295 User manual

GV Bookcase
Assembly Instructions -
Please keep for future reference
Dimensions
Depth - 16.5cm
Width - 65cm
Height - 82.5cm
609/2115
609/3523
609/1295
Important - Please read these instructions fully before starting assembly
Version 4 Date: 27/07/16
If you need help or have damaged or missing parts, call the Customer Helpline:
Argos = 0345 6400800

1
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
the following pages.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• During assembly do not stand
or put weight on the product,
this could cause damage.
• Assemble the item as close
to its final position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Parts of the assembly will be
easier with 2 people.
• To reduce
the likelihood of
damaging your
product please
ensure that your
power drill is set on a low torque
setting.
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
Care and maintenance
• Assemble all parts and bolts
loosely during assembly, only
once the product is complete
should you fully tighten the bolts
• Regularly check and ensure
that all bolts and fittings are
tightend properly.
Handy Hints

2
Top panel (61.8 x 15.8cm)
1
Bottom panel (61.8 x 15.8cm)
2Left side panel (82.3 x 16cm)
6
Shelf x 2 (61.8 x 15.8cm)
3
Back panel (76.2 x 64.4cm)
7
Right side panel (82.3 x 16cm)
5
Front panel (61.8 x 5.9cm)
4
Finished front edge
Finished front edge
Pilot holes for guidance only
Pilot holes for guidance only
Components - Panels
Please check you have all the panels listed below
If you have damaged or missing components, call the
Customer Helpline:
Argos = 0345 6400800

3
Note: The quantities below are the correct amount to complete the assembly. in some cases mor
may be supplied than are required.
Components - Fittings
ABC
DEF
I
14mm Screw x 9
Shelf support x 850mm Screw x 8
Wall strap x 1 x 1 Nail x 20
Wall plug x 1
Support cover x 8
Screw cover x 8
Plastic support x 4
GH
(This screw is
included in the
bag of wall strap)
Ruler - Use this ruler to help correctly identify the screws
Tools required
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 115 120 125 130 135 140 145 150 155 160 165 170
105
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
0 1 2 3 4 5 6
Phillips screwdriver
(medium & large)
Small
hammer
Ruler/tape
measure
Drill
Eye protection
(when using a
hammer or glue)
The screws length is measured from the head to the point (30mm screw shown).
7mm Suitable drill bit
(for use with wall plug)

4
Assembly Instructions
Step 1
Step 2
back edge
Attaching side panels
back edge
D
B
B
B
B
back edge
2
Attaching bottom panel
Use Plastic supports
Front panel onto the
Bottom panel .
A
2
4
B
Left side panel and
Right side panel onto
the Bottom panel and
Top panel .
5
6
2
1
B
A
B
B
A
A
A
A
B
B
B
4
1
2
5
6
D
D
D
D
D
D
D
D

5
Assembly Instructions
Step 3
Fixing back panel
7
back surface
I
Attach Back panel
onto the unit using Nails
.
7
I
Important:
The unit MUST
be ‘square’ when
back is attached.

6
Step 4
Assembly Instructions
With help, move this product
into position.
remove this product.
Drill a hole and insert Wall
plug .
Reposition this product and
Screw .
Fixing to wall
Warning:
This product is
heavy.
Lift with care.
Warning:
Before drilling,
check wall for
hidden pipes and
cables.
C
G
wall
B
G
Top panel
C
G
GGC
Note: Wall plugs supplied are
for solid wall only.
be used for your wall, seek
professional advice if in doubt
Back panel
Warning:
In order to prevent
overturning, this
product must be
used with the wall
attachment device
provided.
strap onto the unit.
B
G

7
If you need help or have damaged or missing parts, call the Customer Helpline:
Argos = 0345 6400800
Assembly is complete.
Step 5
Assembly Instructions
b:
Slide the Shelves
into this product.
3
b:
a:
EF
Attaching shelves
a:
SIide Support covers
onto Shelf supports .
lnsert Shelf supports
(Support covers are
included) into the unit.
before inserting the Shelves.
EF
F
Note:
Set the shelf
supports to the desired
height.
E
E+FH
H
H
H
H
H
H
Use Screw covers to
cover the screw heads.
H
With help, carefully stand
this product upright.
Warning:
This product is
heavy.
Lift with care.
3
3
Finished
front edge

A Guide to - Wall Mounting & Fixings
Revision 2 - 7/10/09
Important note:
Types of walls
Care &
Maintenance
No.1 “General Purpose” wall plug
No.6 “Shield Anchor” wall plug
Heavy loads
No.3 “Cavity Fixing” wall plug
No.4 “Cavity Fixing-Heavy Duty”
wall plug
No.5 “Hammer Fixing” wall plug
No.2 “Plasterboard” wall plug
Generally aerated blocks should not
be used to support heavy loads, use
a specialist tting in this case. For light
loads, general purpose wall plugs can
be used.
For use with heavier loads such as TV
& HiFi speakers and satelite dishes etc.
For use with plasterboard partitions or
hollow wooden doors.
For use when tting or supporting
heavy loads such as shelving, wall
cabinets and coat racks.
For use with walls stuck with
plasterboard. The hammer xing allows
it to be xed to the wall rather than the
plasterboard. Always check the xing
is secure to the retaining wall.
For use when attaching light loads on
to plasterboard partitions.
Safety: Always check the fitting
and location to ensure your safety
in and around the home.
Fitting: From time to time check
the fitting to ensure the wall plugs
or screws do not become loose.
You can use one of the following types of wall plug if your walls are made
of brick, breeze block, concrete, stone or wood.
Important: When drilling into walls always
check that there are no hidden wires or pipes etc.
Hints:
1: General rule: Always use a larger screw and wall plug
if you are not sure.
2: Ensure you use the recommended drill bit to match the wall
plug and hole size.
3: Ensure you drill the hole horizontally, do not force the drill or
enlarge the hole.
4: Take extra care when drilling high walls, ceilings and ceramic
tiles. Ensure wall plugs are inserted beyond the thickness of
the ceramic tiles to avoid the tiles splitting or cracking.
5: Ensure wall plugs are well tted and are a tight t in the
drilled hole.
If plastic wall plugs
are supplied with your
product:
Make sure that the screws and wall plugs being used
are suitable for supporting your unit. Consult a qualified
tradesperson if you are unsure.
- these are only suitable for
use in masonry walls.
If you are in any doubt about
the correct wall plugs for
your wall, seek professional
advice.
Failure of the product due to
using incorrect xings is the
responsibility of the installer.