Argos 832/7149 D User manual

Ｇ２
Ｈ
Ｉ１
Ｉ２
１
Ｆ
Ｇ１
８＊３０＝４Ｘ

２０Ｘ
８Ｘ
６Ｘ
Ｍ４＊２０＝３Ｘ
Ｍ３＊１２＝１２Ｘ
Ｍ４＊３１＝８Ｘ
Ｓ８＝４Ｘ
Ｍ５＊５０＝４Ｘ
３Ｘ
８Ｘ
Ｅ２
１Ｘ
１Ｘ
Ｅ１
Ｅ３
１Ｘ
Ｇ２
１Ｘ
Ｈ
４Ｘ
Ｉ１
１Ｘ
Ｉ２
ｏ
ｐ
ｑ
８３２／７１４９（Ｄ）
ｅ
８Ｘ
ｉ
ｈ
ｇ
ｆ
ｄ
ｃ
ｂ
ａ
Ｂ
Ｃ
Ｄ
Ａ
１Ｘ
１Ｘ
１Ｘ
１Ｘ
１Ｘ
１Ｘ
１Ｘ
２
ＡＲＧＯＳ
Ｇ１
Ｆ
３Ｘ
Ｌａｒｇｅ ｗｈｉｔｅ ｗｏｏｄ ３ ｄｏｏｒ
ｍｅｄｉｃｉｎｅ ｃａｂｉｎｅｔ
ｊ
ｋ３Ｘ
８＊３０＝４Ｘ

＃１
３
＃２

＃３
４
＃４

ｄ
ｄ
ｄ
＃５
５
＃６

＃７
６
＃８

＃９
＃１０
Ｉ１
ｊｊ
ｊ
７

＃１１
８
＃１２

SAFETY WARNING INFORMATION BS7449 : 1991
Keep these instructions for future use: Catalogue Number: 832/7149(D)
Manufacture date:
Retailer: ARGOS
WARNINGS Retailer address: 489-499 Avebury Boulevard
*It is essential that this unit is fixed to a wall with the Saxon Gate West
fixings provided. Central Milton Keynes
Bucks, MK9 2NW
*Do not place very hot or very cold items against or in
close proximity to glass surface unless an adequately
thick insulating material is used to prevent such items This unit contains toughened glass shelves of nominal
from coming into contact with the glass. thickness of 5 mm,which com
p
lies with Class C
of BS6206.
*Do not strike the glass with hard or pointed items.
*Do not sit ot stand upon horizontal glass surface. If a glass is chipped or broken replace with
glass of the type described on this label. Consult the
*When cleaning glass panels or mirrors use a damp manufacturer, retailer, or agent with regard to
or leather with washing up liquid or soft soap if necessary; obtaining a manufacturing specification and shape for
do not use washing powders or any other substance replacement glass quoting the model number, and batch
containing abrasive since these substances scratch glass. number or date of manufacture.
The Maximum Safe Load for the cabinet is 3 k
g
, evenl
y
distributed.

No.3 "Shield Anchor" Wall Plug
Heavy Loads
For use with heavier loads such as TV
& HiFi Speakers and Satellite Dishes etc.
No.4 "Cavity Fixing" Wall Plug
For use with plaster board partitions or
hollow wooden doors.
No.5 "Cavity Fixing - Heavy Duty"
Wall Plug
For use when fitting or supporting heavy
loads such as shelving, wall cabinets,
coat racks.
IMPORTANT:
When drilling into walls always check that there are no
hidden wires or pipes etc. Make sure that the screws and
wall plugs being used are suitable for supporting your unit.
Consult a qualified tradesperson if you are unsure.
HINTS:
1) General Rule Always use a larger screw and wall plug if you are not sure.
2) Ensure you use the recommended drill bit to match the wall plug and hole size.
3) Ensure you drill the hole horizontally, do not force the drill or enlarge the hole.
4) Take extra care when drilling high walls, ceilings and ceramic tiles. Ensure the plug is fitting below the ceramic
tile to avoid splitting or cracking.
5) Ensure wall plugs are well fitted and are a tight fit in the drilled hole.
Types Of Walls
You can use one of the following types
of wall plug if your walls are made of
brick, breeze block, concrete, stone,
wood or plaster board.
No.1 "Standard" Wall Plug
General Wall Materials
These come in various sizes and are made
from plastic or sometimes wood fiber.
No.2 "General Purpose" Wall Plug
Aerated / Breeze Block
Generally aerated blocks should not be
used to support heavy loads, use a
specialist fitting in this case.
For light loads, a General Purpose Plug
can be used.
No.6 "Hammer Fixing" Wall Plug
For use with walls stuck with plaster
board. The hammer fixing allows it to
be fixed to the wall rather than the plaster
board. Always check the fixing is secure
to the retaining wall.
CARE & MAINTENANCE
SAFETY
Always check the fitting and
location to ensure your safety in
and around the home.
FITTING
From time to time check the fitting
to ensure the wall plugs or screws
do not become loose.
Wall Mounting & Fixings
A Guide to

Large White Wood 3 Door Medicine Cabinet
832/7149
65
12.7
45

Components - Panels
Please check you have all the panels listed below
123
10
9
8
Top
4Left & right door x 2 5Middle door 6Back
Bottom Left & right side x 2
Glass shelf 1 x 4 11 Glass shelf 2
Right clapboard
7Left clapboard Shelf
2

Please check you have all the panels listed below
Components - Fittings If you have damaged or missing components,
call the Customer Helpline:08456 400800
Note:The quantities below are the correct amount to complete the assembly .In some cases more
fittings may be supplied than are required.
AB C
D
G
J
M
E
H
K
F
I
L
Wooden dowel x 4
Shaft x 6 Knob x 3 Knob Bolt x 3
35mm Screw x 12 Shelf Support x 20
12mm Screw x 9 Screw Cap x 8
Locking Pin x 8 Locking Nut x 8
3
Ruler- Use this ruler to help correctly identifythescrews
Tools required
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100
110 115 120 125 130 135 140 145 150 155 160 165 170
105
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
0 1 2 3 4 5 6
Phillips screwdriver
(medium & large)
Flatblade screwdriver
(medium)
Small
hammer
Ruler/tape
measure
Drill
7mm Suitable drill bit
(for use with wall plug)
Eye protection
(when using a
hammer or glue)
Wall plug(for solid walls only) x 4
Magnetic Catch x 3
Strike Plate x 3

Assembly Instruction
Step 1
Step 2
Assembling clapboards and
fixed shelf
Assembling top and bottom
panel
Assembling middle unit and
left side panel
NOTE:It would be useful to ask
someone to help you at this stage.
NOTE:It would be useful to ask
someone to help you at this stage.
NOTE:It would be useful to ask
someone to help you at this stage.
1
KK
I
4
Use dowels to fix left and
right clapboards 7 and with
shelf in the middle
Screw locking pins into the
top panel and bottom panel
Use 12mm screws to fix
magnetic catch onto top panel
Carefully attach the middle unit
onto bottom panel
Use a screw driver to turn the
locking nuts clockwise to lock
the unit
Use 35mm screws to fix
left side panel to bottom
panel
Step 3
7
8
8
79
2
2
1
1
1
3
3
7
8
2
2
2
9
B
C
C
C
C
K
K
K
K
B
B
B
B
B
B
B
B
AA
A
A
A
G
C
I
I
I
I
G
G
C
C
B

Assembly Instruction
Step 5
Step 4
Assembling back panel
NOTE:It would be useful to ask
someone to help you at this stage.
Assembling right side panel
NOTE:It would be useful to ask
someone to help you at this stage.
5
Use 35mm screws to fix
right side panel to bottom
panel
Carefully slide the back panel
into the grooves
2
2
3
3
8
8
2
3
G
G
G

Step 6
Assembly Instruction
Assembling glass shelves
NOTE:It would be useful to ask
someone to help you at this stage.
a:Insert shelf supports into
panels holes as shown
b:Carefully input the glass shelves
and in the middle
c:Repeat step a and b to input the
other 2pcs glass shelves
Turn the supports clockwise to
lock the shelves
6
a:
b:
c:
10
10
10
10
11
10
10
10
11
11
H
H
H
H
H
H
H H
H
H
H

Step 7
Assembly Instruction
Finishing the unit
NOTE:It would be useful to ask
someone to help you at this stage.
a: Use 12mm screws to fix
strike plate onto door panels
and
b: Insert door shafts into door
panels and
Use 35mm screws to fix top
panel to the unit
Use knob bolt to fix knobs
onto door panels
C: Insert locking nuts into the
clapboards,turn clockwise to
lock the unit
7
a:
b:
c:
5
1
3
45
4
4
4
4
5
5
5
4
4
F
F
F
F
E
J
K
D
C
G
G
G
G
G
C
C
D
D
K
K
K
J
J
J
E
E
E
E
C
C

Step 8
Assembly Instruction
Finishing the unit
NOTE:It would be useful to ask
someone to help you at this stage.
8
a:
b:
L
L
L
M
M
M
M
G
G
G
G
G
NOTE:If you have damaged or missing components,
call the Customer Helpline:08456 400800
Home Retail Group,489-499 Avebury Boulevard,
Central Milton Keynes, MK9 2NW
The assembly is now complete
NOTE: Please make sure the
unit is secure before use
With help , place the unit in the
intended position
b:Use 35mm screw and Wall
Plug to fix the unit on the wall
a:Insert screw caps into screw
holes

A Guide to - Wall Mounting & Fixings
Revision 2 - 7/10/09
Important note:
Types of walls
Care &
Maintenance
No.1 “General Purpose” wall plug
No.6 “Shield Anchor” wall plug
Heavy loads
No.3 “Cavity Fixing” wall plug
No.4 “Cavity Fixing-Heavy Duty”
wall plug
No.5 “Hammer Fixing” wall plug
No.2 “Plasterboard” wall plug
Generally aerated blocks should not
be used to support heavy loads, use
a specialist tting in this case. For light
loads, general purpose wall plugs can
be used.
For use with heavier loads such as TV
& HiFi speakers and satelite dishes etc.
For use with plasterboard partitions or
hollow wooden doors.
For use when tting or supporting
heavy loads such as shelving, wall
cabinets and coat racks.
For use with walls stuck with
plasterboard. The hammer xing allows
it to be xed to the wall rather than the
plasterboard. Always check the xing
is secure to the retaining wall.
For use when attaching light loads on
to plasterboard partitions.
Safety: Always check the fitting
and location to ensure your safety
in and around the home.
Fitting: From time to time check
the fitting to ensure the wall plugs
or screws do not become loose.
You can use one of the following types of wall plug if your walls are made
of brick, breeze block, concrete, stone or wood.
Important: When drilling into walls always
check that there are no hidden wires or pipes etc.
Hints:
1: General rule: Always use a larger screw and wall plug
if you are not sure.
2: Ensure you use the recommended drill bit to match the wall
plug and hole size.
3: Ensure you drill the hole horizontally, do not force the drill or
enlarge the hole.
4: Take extra care when drilling high walls, ceilings and ceramic
tiles. Ensure wall plugs are inserted beyond the thickness of
the ceramic tiles to avoid the tiles splitting or cracking.
5: Ensure wall plugs are well tted and are a tight t in the
drilled hole.
If plastic wall plugs
are supplied with your
product:
Make sure that the screws and wall plugs being used
are suitable for supporting your unit. Consult a qualified
tradesperson if you are unsure.
- these are only suitable for
use in masonry walls.
If you are in any doubt about
the correct wall plugs for
your wall, seek professional
advice.
Failure of the product due to
using incorrect xings is the
responsibility of the installer.