Argos SAN DIEGO 395/6199 User manual

SAN DIEGO - Nest Of Tables
395/6199
Assembly Instructions - Please keep for future reference
Issue 1 - 15/04/15
If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400 800
Important –Please read these instructions fully before starting assembly
Dimensions
Width - 66cm
Depth - 44cm
Height - 59cm

Safety and Care Advice
Important – Please read these instructions fully before starting assembly
Note: If required the next page
can be cut out and used as
reference throughout the
assembly. Keep this page with
these instructions for future
reference.
1
Check you have all the
components and tools listed on
pages 2 and 3.
Remove all fittings from the
plastic bags and separate them
into their groups.
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough
space to layout the parts before
starting.
Do not stand or put weight on
the product, this could cause
damage.
Assemble the item as close
to its final position (in the same
room) as possible.
Assemble on a soft level
surface to avoid damaging the
unit or your floor.
We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
Parts of the assembly will be
easier with 2 people.
Dispose of all packaging
carefully and responsibly.
This product has been produced
from natural timber; you may
notice some variation in the grain
and colour of different component
parts which is normal for furniture
produced using natural wood and
is not the result of any
manufacturing fault.
The product has been treated
with a wax and oil finish to
prevent dirt ingress and preserve
moisture.
On unpacking the
furniture you may notice an
odour due to this treatment;
this will disappear once the
furniture is unpacked and
assembled after a period of time.
This process may leave some
staining on the packaging
material; please take care to
ensure this does not transfer
to clothing or carpeted surfaces
during assembly.
Care and maintenance
Use an appropriate furniture
polish for natural wood
furniture and a dry cloth to
clean the product.
Avoid placing the furniture in
direct sunlight as this will cause
the timber to prematurely age.
From time to time check
that there are no loose
screws on this unit.
This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre.

Components - Panels
Please check you have all the panels listed below
2
1Large top panel
(66 x 44cm)
3Large right side panel
(56.2 x 36cm)
5Small top panel
(46 x 36cm)
2Large rail x 3
(50.6 x 4.5cm)
6Small rail x 4
(30.6 x 4.5cm)
4Large left side panel
(56.2 x 36cm)
7Small side panel x 2
(47.4 x 28cm)

3
Please check you have all the fittings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases more
fittings may be supplied than are required.
Components - Fittings If you have damaged or missing components,
call the Customer Helpline: 03456 400 800
3
Ruler - Use this ruler to help correctly identify the screws
0510 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170
Tools required
Phillips screwdriver
(small & medium)
Eye protection
(when using a
hammer or glue)
Small
hammer
Ruler/tape
measure
2m
A
D
CB
Wooden dowel x 8 Allen key x 1
80mm Bolt x 14
35mm Screw x 8

Assembly Instructions
4
Step 2
Assembling small
table.
Two people are required
for an easier assembly.
Insert rails to the
small side panels .
Step 1
Insert dowels into the
side panels as indicated.
A
AA
A
3
4
7
2x
7
7
6
6
6
6
6
7
Step 3
C
D
D
D
D
D
D
D
D
D
Fixing small table.
small table usingAttach
bolts and allen key ,
as shown.
CD

Assembly Instructions
5
Step 4
Step 5
D
D
D
D
D
D
C
D
Fixing large table.
large table usingAttach
bolts and allen key ,
as shown.
CD
Assembling large
table.
Two people are required
for an easier assembly.
Insert rails to the
large right side panel
and large left side panel
.
2
3
4
3
4
2
2
2

Assembly Instructions
6
If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400 800
Step 6
Step 7
Fixing top panels.
Caution:
Carefully lay the
top panel on a soft
and clean surface to
avoid damaging the
product.
Attach assembled frame
to the top panel using
screws .
After fixing top panel,
carefully stand product
upright.
Repeat step 6 using top
panel for assembling
table.small
1
B
B
5
Insert small table
underneath large table.
It is onlyNote:
possible to insert
small table through one
of the sides of large table.
You may need to rotate
large table to insert the
small one.
Assembly is complete.
B
B
B
B
1
1