Argos Matrix 610/8267 User manual

Assembly Instructions
Stage 2 - Fitting Glass Shelf D and Metal Tube E
Components Assembly Instructions
Stage 1 - Fitting Metal Rod B and Metal Tube C
fig 1
Finger tighten 4 pcs of Metal Rods
onto Glass Top as shown.
fig 2
Attach 4 pcs of Metal Tube
through 4 pcs of Metal Rods
as shown.
fig 1
fig 2
fig 3
Please be careful to place Glass
Shelf through 4 pcs of Metal
Rods as shown.
fig 4
fig 3
B
C
B
D
B
A
fig 4
Attach 4 pcs of Metal Tube
through 4 pcs of Metal Rods
as shown.
E
B
DGlass Shelf x 1 CMetal Tube x 4
BMetal Rod x 4
AGlass Top x 1
B
C
B
A
C
B
C
C
B
A
B
B
B
A
D
B
A
B
B
E
E
FFeet x 4 EMetal Tube x 4

Assembly Instructions Assembly Instructions
Stage 4 - Completed
Matrix Glass Coffee Table
Care and Maintenance
Cleaning
Clean all surfaces with a damp cloth and mild detergent. Please do not use bleach or
abrasive products.
Fitting
From time to time check to ensure the screws and legs remain rigid.
fig 5
fig 6
fig 7fig 5
Finger tighten 4 pcs of Feet
onto the unit as shown.
F
Stage 3 - Fitting Feet F
fig 6
Please check carefully if all parts are
tightened before turn the unit over.
fig 7
Completed.
A
B
B
F
Completed.
F
F
F
A
B
D
B
B
B
C
C
C
C
E
E
E
E
F
F
F
F
IMPORTANT
1. Read these instructions carefully and yourself with the
procedures the unit.
2. Check that you have all the component Follow the list on the back
yourself with
familiarise
before assembling
parts.
cover and familiarise each part before proceeding.
3. Take all the fittings out of the plastic bag and separate them into their groups.
4. Ensure you have enough space to lay out all parts before assembly.
5. To avoid scratches. It is recommended that you assemble the unit on a soft
leveled surface.
Instructions for BS 7376 : 2004
for products (tables or trolleys)
which include glass
If the glass is chipped or broken , stop using the product
and consult the manufacturer or supplier
-Do not place very hot or cold items on the glass surface(s) unless adequately
thick table mats are used to prevent such items from coming into contact with
the glass.
-Do not use the glass as a chopping surface. Do not strike the glass with hard
or pointed items.
-Do not sit or stand upon the glass surface(s).
-When cleaning glass panels use a damp cloth or leather with washing up liquid
or soft soap if necessary: do not use washing powders or any other substances
containing abrasives since these substances scratch glass.
Marking BS 7376:2004 on or in relation to a product represents a manufacture's declaration of conformity
, i.e. a claim by or on behalf of the manufacturer that the product meets the requirements of the standard.
The accuracy of the claim is therefore solely the responsibility of the person making the claim. Such a
declaration is not to be confused with third party certification of conformity, which may also be desirable.
WARNINGS
2 PEOPLE LIFT THE
ASSEMBLY UNIT.
TURN THE
UNIT UPRIGHT
Catalogue Number: 6108267(Clear Glass) / 6090708(Black Glass)
Batch Number / Date of Manufacture: September 2007
Retailer: Argos
Retailer address: 489-499 Avebury Boulevard
Saxon Gate West
Central Milton Keynes
Mk9 2NW
SAFETY WARNING INFORMATION
Keep these instructions for future use:

Matrix - Glass Coffee Table
Assembly Instructions - Please keep for future reference 610/8267
Dimensions
Width - 100cm
Depth - 50cm
Height - 45cm
Important - Please read these instruction fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Issue 1 - 11/01/09
609/0708

1
Safety and Care Advice
Important -Please read these instructions fully before starting assembly
components and tools listed on
plastic bags and separate them
into their groups.
away from the work area, small
parts could choke if swallowed.
space to layout the parts before
starting.
room) as possible.
surface to avoid damaging the
easier with 2 people.
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
carefully and responsibly.
and mild detergent, do not use
bleach or abrasive cleaners.
there are no loose screws on
this unit.
discarded with household
waste. Take to your local
authority waste disposal centre.
Care and maintenance
pages 2.
Keep These Instructions For Future Reference
This product complies with
BS 7376:2004
Argos plc
489-499 Avebury Boulevard
Central Milton Keynes
MK9 2NW
Batch No./Date of manufacture:
Warning
Do not place very hot or very
cold items against or in close
proximity to glass surfaces
unless an adequately thick
insulating material is used to
prevent such items from coming
into contact with the glass.
Do not sit or stand upon the
glass surface(s).
Do not use the glass as a
chopping surface. Do not strike
the glass with hard or pointed
items.
If a glass component is chipped
or broken, stop using the product
and consult the manufacturer or
supplier.
this could cause damage.
Do not stand on the product,

Components - Panels
Please check you have all the panels listed below
2
Glass shelf (100 x 50 cm)
2Metal rod x 4 (43.5 x 0.8 cm) 3
Glass top (100 x50cm)
1
Metal tube x 4 (5.08 x 8cm)
5Feet x 4 (5.2x 1.4cm) 6
Metal tube x 4 (32.5 x 5.08cm)
4
Ruler - Use this ruler to help correctly identify the screws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 120105 115 125 130 135 140 145 150 155 160 165 170

Assembly Instructions
Step 1
Step 2
Attaching rods
Finger tighten 4 pcs of
metal rods onto
glass top as shown.
1
2
Attaching tubes
Attach 4 pcs of metal
tube through 4 pcs
of metal rods as
shown.
2
3
3
1
2
2
2
2
3
3
3
3
2
2
2
2
1

Assembly Instructions
Step 3
Attaching shelf
Please be careful to
place glass shelf
through 4 pcs of metal
rods as shown.
Attaching rods
Attach 4 pcs of metal
tube through 4 pcs
of metal rods as
shown.
Assembly Instructions
Step 4
2
4
2
5
2
4
2
2
2
1
4
5
5
5
5
2
1
42
2
2
Matt surface

Assembly Instructions
Step 5
Attaching feet
Finger tighten 4 pcs of
feet onto the unit as
shown.
Step 6
6
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
5
4
1
6
6
6
6
6
5
Assembly is
completed.

Assembly Instructions - Please keep for future reference
Dimensions
Width - 100cm
Depth - 50cm
Height - 45cm
Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Matrix - Glass Coffee Table
issue 1 4/19/11
610/8267
609/0708
609/2847
43928

We do not
recommend the use
of power drill/ drivers
for inserting screws,
as this could damage
the unit. Only use hand
screwdrivers.
Warning: The unit weighs
approximately 18.8kgs.
Please lift with care.
●Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
●From time to time check that
there are no loose screws on this
unit.
●This product should not be
discarded with household waste.
Take to your local authority waste
disposal centre.
1
Safety and Care Advice
Important - Please read these instructions fully before starting assembly
Care and maintenance
Check you have all the
components and tools listed on
pages 2.
plastic bags and separate them
into their groups.
Remove all fittings from the
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough
space to layout the parts before
starting.
Do not stand on the panels, this
could cause damage.
Assemble the unit as close to its
final position (in the same room)
as possible.
Assemble on a soft level
surface to avoid damaging the unit
or your floor.
Parts of the assembly will be
easier with 2 people.
Dispose of all packaging carefully
and responsibly.
disposal centre.
Assembly to be carried out by
the competent adult only.
During assembly children
should be kept away from the
product due to the potential risk of
injury.
Do not use this item if any
components are missing or
damaged.
Keep these instructions for future reference
If a glass component is chipped
or broken, stop using the product
and consult the manufacturer
supplier.
This product complies with
BSEN14749.
Argos Ltd. MK9 2NW.
Warning
Do not place very hot or very
cold items against or in close
proximity to glass surfaces unless
an adequately thick insulating
material is used to prevent such
items from coming into contact
with the glass.
Do not strike the glass with hard
or pointed items.
When cleaning glass panels
use a damp cloth or leather with
washing up liquid or soft soap if
necessary; do not use washing
powders or any other substances
containing abrasives since these
substances scratch glass.