Argos Home Wow Oslo 482/2844 User manual

Wow Oslo Dining Chair
Assembly Instructions - Please keep for future reference
Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline:
Argos = 0345 640 0800
Issue 1 - 15/08/16
Dimensions
Width - 40.5cm
Depth - 47cm
Height - 91cm
482/2844
482/7014

Care and maintenance
Handy Hints
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• Do not stand on the chair.
• Do not use this chair as step
ladder.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
• Assemble all parts and bolts
loosely during assembly, only
once the product is complete
should you fully tighten the
bolts.
• Regularly check and ensure
that all bolts and fittings are
tightend properly.
• Check you have all the
components and tools listed on
the following pages.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• During assembly do not stand
or put weight on the product, this
could cause damage.
• Assemble the item as close to
its final position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Parts of the assembly will be
easier with 2 people.
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
• Unit weight: 3.72 kgs.
• Maximum safe weight of user:
110kgs.
1
Safety and Care Advice
Important - Please read these instructions fully before starting assembly

Front Rail
(35 x ø1.3cm)
4
Seat Rail
(35.5 x 1.3 x 1.3cm)
3Backrest
(40.5 x 91 x 7cm)
1
Seat
(40 x 40 x 5cm)
5
Leg Frame x 2
(41.5 x 41.5 x 1.9cm)
2
2
Components - Fittings
Please check you have all the fittings listed below
AB
M6 x 35mm Bolt x 8 M6 x 25mm Bolt x 4
C
Allen Key x 1
Components - Parts
Please check you have all the parts listed below
If you have damaged or missing components, call the
Customer Helpline: Argos = 0345 640 0800
Ruler - Use this ruler to help correctly identify the screws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 115 120 125 130 135 140 145 150 155 160 165 170
105
Note: The quantities below are the correct amount to complete the assembly of 1 chair.
Note: The quantities below are the correct amount to complete the assembly of 1 chair.

3
Assembly Instructions
Step 1
Attaching leg frames
Position the leg frames
on the backrest as
shown and fix through
holes using bolts .
Tighten bolts using allen
key .
A
C
Step 2
Attaching rails
Position the seat rail
between the leg frames
as shown and fix
through holes using bolts
.
Tighten bolts using allen
key .
Repeat above step to
assemble the front rail
on the leg frames.
1
2
A
C
3
4
2
A
A
A
A
A
A
A
A
A
A
1
1
2
2
2
2
3
3
4
2
2

4
Assembly Instructions
Step 3
Attaching seat
Place the seat on a
raised protected surface.
Position the assembled
chair frame on the seat
as shown and fix through
holes on the leg frames
using bolts .
Tighten bolts using allen
key .
Carefully turn over the
chair and place on a firm
surface.
Assembly is complete.
If you need help or have damaged or missing parts, call the Customer Helpline:
Argos = 0345 640 0800
5
2B
C
B
B
B
B
B
2
2
5
5
2