Argos Butterfly 267/8849 User manual

Issue 1 - 6/03/14
Important – Please read these instructions fully before starting assembly
Assembly Instructions - Please keep for future reference
266/0792
267/8849
If you need help or have damaged or missing parts, call the Customer Helpline:
Argos = 0345 6400800
Butterfly Oval Dining Set
Width - 96cm Width - 96cm Width - 43cm
Length - 125cm Length - 46cm Depth - 50.3cm
Height - 75cm Height - 75cm Height - 77.3cm
Dimension
Fully Extended Middle Table Chair

1
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
Note: if required the next
page can be cut out and used
as reference throughout the
assembly. Keep this page with
these instructions for future
reference.
• Check you have all the
components and tools listed on
the following pages.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• During assembly do not stand
or put weight on the product,
this could cause damage.
• Assemble the item as close
to its final position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Parts of the assembly will be
easier with 2 people.
• To reduce
the likelihood of
damaging your
product please
ensure that your
power drill is set on a low torque
setting.
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
Care and maintenance
• Assemble all parts and bolts
loosely during assembly, only
once the product is complete
should you fully tighten the bolts
• Regularly check and ensure
that all bolts and fittings are
tightend properly.
Handy Hints
• Do not stand on the chair.
• Do not use this chair as a step
ladder.
• Maximun safe weight of user
on the chair: 110kgs.

Bottom shelf
(39.6x 90cm)
4Back panel (39.8 x 67.5cm)
5Front panel (39.8 x 73.5cm) 6
Side frame x 2
(40.7 x 73.4cm)
7
Supporting bar x 2
(3.5 x 90cm)
3
Side table top x 2
(39.5 x 96cm)
1Middle table top
(46 x 96cm)
2
Components - Panels
Please check you have all the panels listed below
2
If you have damaged or missing components, call the
Customer Helpline: Argos = 0345 6400800
Folding chair x 4
(88.5 x 43cm)
8

3
Please check you have all the fittings listed below
14mm Wood Screw x 52
A
Stopper x 2
E
20mm Bolt x 1
B
Small Hinge x 4
H
40mm Bolt x 6
C
Large Hinge x 6
I
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
Hex key x 1
F
47mm Bolt x 8
D
Wooden Dowel x 8
K
Castor x 2
M
Handle x 1
L
Wrench x 1
G
Metal Dowel x 4
J
Components - Fittings
Ruler - Use this ruler to help correctly identify the screws
Tools required
100 20 30 40 50 60 70 80 90 100
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 115 120 125 130 135 140 145 150 155 160 165 170
105
Phillips screwdriver
(Medium)

Assembly Instructions
Assemble handle
Fix handle Lto front
panel 6using bolt B.
Step 2
Step 1
Assemble castor
Screw castor Minto
back panel 5.
6
L
B
4
M
M
5

5
E
E
Assembly Instructions
Step 3
a:
Assemble table top
Two people are
needed here.
a: Place the table tops
upside down, x side
table tops 1onto middle
table top 2using wood
screws A
, small hinges
H and large hinges I.
Screw stoppers Einto
the side table tops.
b: Fix supporting bar
3to the table top using
bolts C.
Note: Do not fully
tighten bolts.
b:
1
A
2
3
1
H
I
C

6
Assembly Instructions
Step 4
a:
Assemble the frame
unit
a: Insert wooden dowels
Kinto supporting bar.
Attach front and back
panels using bolts D.
Note: Do not fully
tighten bolts.
b: Insert metal dowel J
into supporting bar, then
position side frame 7
onto the supporting bar.
Insert metal dowel Jinto
side frame 7.
b:
DK
7
J
J
7
J
J

4
K
D
D
D
D
7
7
K
K
K
7
Assembly Instructions
Step 5
a:
Finishing the unit
Two people are
needed here.
a: Insert wooden dowel
Kinto bottom shelf 4.
Position bottom shelf 4
onto the side frame 7,
then attach bottom shelf
to front and back panel
using bolts D.
Note: Re-tighten all the
bolts.
b: Turn the table back to
its up-right position.
Note: Two person
handling is required.
b:

Assembly Instructions
Step 6
Additional information
a: Depending on your
requirement open one
or both of the side table
top and ensure the side
frame is locked.
b: To move the table, lift
up the end opposite to
the castors position as
shown in the figure.
a:
b:
8
Continued on next page.

Assembly Instructions
Step 6
c: To save space, the
chairs can be put inside
the table as shown.
c:
If you need help or have damaged or missing parts, call the Customer Helpline:
Argos = 0345 6400800