Aruba Instant On 1930 Series Owner's manual

START HERE: Installation, Safety, and Regulatory
Information for the Aruba Instant On 1930 Switches
All product documentation
For the latest release of hardware and software documentation for Aruba Instant On 1930 switches and accessories,
visit the Aruba Support Portal at the following link and click Support.
https://www.arubainstanton.com/
See the rest of this guide for important presetup information.
WARNING: There are no user-serviceable parts in the Aruba Instant On 1930 switches, or the AC
adapter used with the 8G switch. For switch or accessory service needs, contact an authorized Aruba
representative.
Applicable products
Aruba Instant On 1930 8G 2SFP Switch JL680A AC Power Adapter:1
•13W External AC Adapter (5066-5562)
•13W External AC Adapter (5184-5864)
• 13W External AC Adapter (5300-1005)
• 15W External AC Adapter (5066-5563)
Aruba Instant On 1930 8G Class4 PoE 2SFP
124W Switch
JL681A
Aruba Instant On 1930 24G 4SFP/SFP+
Switch
JL682A
Aruba Instant On 1930 24G Class4 PoE
4SFP/SFP+ 195W Switch
JL683A
Aruba Instant On 1930 24G Class4 PoE
4SFP/SFP+ 370W Switch
JL684A
Aruba Instant On 1930 48G 4SFP/SFP+
Switch
JL685A
Aruba Instant On 1930 48G Class4 PoE
4SFP/SFP+ 370W Switch
JL686A
1 Used with the JL680A Aruba Instant On 1930 8G 2SFP Switch. All other Aruba Instant On 1930 switches operate with internal
power supplies. For more information on power adapters, see the latest Installation and Getting Started Guide for your Aruba
Instant On 1930 Switch.
*5200-5868*
© Copyright 2020 Hewlett Packard Enterprise Development LP
Part Number: 5200-5868
Published: January 2020
Edition: 1

Overview product information
The Aruba Instant On 1930 Switch series are designed to meet the needs of small business network environments -
simple to setup and manage, secure and reliable. Aruba Instant On deployments can be managed through a Mobile
App supported on iOS and Android, a cloud portal that is accessible through a web browser, or a local web GUI.
These switches are intended for indoor use only. The switches comply with the safety standard IEC 60950-1, 2nd
Edition and IEC 62368-1 2nd Edition. A tool is required to remove the top cover; however, the product is not
considered serviceable by an operator.
Installation precautions and guidelines
To help avoid personal injury or product damage when installing your switch, read the following installation
precautions and guidelines.
WARNING:
• To prevent the rack or cabinet from becoming unstable, tilting, and/or falling over, ensure that it is
adequately secured.
• Mount devices installed in a rack or cabinet as low as possible. Put the heaviest devices at the
bottom, and progressively lighter devices positioned higher. Note, however, that the preferred
position for the fanless Aruba Instant On 1930 switches is at the base of the rack or cabinet (for
optimal cooling) or below as many of the other products as can be accommodated.
• If you wall-mount the switch, the network ports must face upward or downward (that is, toward or
away from the oor). Do not wall-mount the switch with the side ventilation holes facing up or
down.
This section provides precautions and guidelines to observe when installing your switch. For full
installation instructions, see the Aruba Instant On 1930 Switches Installation and Getting Started Guide.
IMPORTANT:
• All Aruba Instant On 1930 Switches support table-top mounting.
• All Aruba Instant On 1930 Switches except JL680A support rack-mounting.
• All Aruba Instant On 1930 Switches support wall-mounting with ports facing either up or down.
• All Aruba Instant On 1930 Switches support under-table mounting.
◦JL682A and JL685A must be mounted top surface up.
◦JL683A, JL684A, and JL686A can be mounted either top surface up or upside down.
◦JL680A and JL681A must be mounted upside down.
IMPORTANT: Use only supported HPE Aruba transceivers. For more information, see the latest version
of the following two guides.
•ArubaOS-Switch and ArubaOS-CX Transceiver Guide
•Aruba Instant On 1930 Switches Installation and Getting Started Guide
Page 2

CAUTION:
•Do not ship any switch in a rack without checking for restrictions in the latest Aruba Instant On 1930
Switches Installation and Getting Started Guide. Otherwise, you may void the switch warranty.
• Ensure that the power source circuits are properly grounded. Then connect the switch to the AC
power source by using the power cord supplied with the switch. For more information on power
cords, see Power cords.
•Ensure that the power cord and network cables at the switch mounting location do not create a
tripping hazard.
• When installing the switch, the AC outlet must be near the switch and easily accessible in case the
switch must be powered o.
• Ensure that the switch does not overload the power circuits, wiring, and over-current protection. To
determine the possibility of overloading the supply circuits:
1. Add the ampere ratings of all devices installed on the same circuit as the switch.
2. Compare the total with the rating limit for the circuit.
The maximum ampere ratings are usually printed on the devices near the AC power connectors.
• Avoid blocking any ventilation openings on the top, sides, rear, or front of the switch.
• Ensure that the air ow around the switch is not restricted. Leave at least 7.6 cm (3 inches) for
cooling. For air ow direction, see the latest Aruba Instant On 1930 Switches Installation and Getting
Started Guide.
• Do not install the switch in an environment where the operating ambient temperature exceeds its
specication. See the environmental operating temperature information in the latest Aruba Instant
On 1930 Switches Installation and Getting Started Guide.
NOTE: The following Aruba Instant On 1930 switch models have a fan-free design, making them
quiet for oice deployments.
• Aruba Instant On 1930 8G 2SFP Switch (JL680A)
• Aruba Instant On 1930 8G PoE 2SFP Switch (JL681A)
• Aruba Instant On 1930 24G 4SFP+ Switch (JL682A)
• Aruba Instant On 1930 48G 4SFP+ Switch (JL685A)
A warmer than normal enclosure is a standard state of operation for a fan-free switch. Although the top
of the switch enclosure may feel warm to the touch, it has no eect on functionality or performance of
the product. For rack-mounted Aruba Instant On 1930 fanless switches, ensure that a 1U (44.45 mm /
1.75-inch) vertical space is maintained between the switch and the device above it.
Power cords
Aruba includes the power cord intended for use with your Aruba switch. Dierent countries/regions may require
dierent power cords. For a list of the power cords that apply to your Aruba Instant On 1930 switch, see the section
that lists power cords in the latest edition of the Aruba Instant On 1930 Switches Installation and Getting Started Guide.
Page 3

CAUTION: Only Aruba-approved power cords may be used with Aruba devices. To access the power
cord information for your switch, see the latest edition of the Aruba Instant On 1930 Switches Installation
and Getting Started Guide. Lost or damaged power cords must be replaced only with Aruba-approved
power cords. If your installation requires a dierent power cord than the one supplied with the switch
and/or power supply, be sure that the cord is adequately sized for the current requirements of the
switch. In addition, be sure to use a power cord displaying the mark of the safety agency that denes
the regulations for power cords in your country/region. The mark is your assurance that the power cord
can be used safely with the switch and power supply.
WARNING: Do not use a damaged or nonrecommended power cord with your switch. Using such
power cords voids the switch and power supply warranty. It can also cause serious electrical problems,
including injury or death to personnel, and damage to the switch and other property. If you cannot
verify that you have a power cord approved for use with your switch model, contact your authorized
Aruba dealer or sales representative for assistance.
WARNING: Remove the power cord from the switch before mounting or dismounting the switch.
Environmental specications
Table 1: Environmental specications for all 1930 switch models
Requirement Value
Operating temperature 32°F to 104°F (0°C to 40°C)
Operating relative humidity 15% to 95%
Non-operating temperature -40°F to 158°F (-40°C to 70°C) up to 15000 ft
Storage relative humidity 15% to 95%
Max operating altitude 10000 feet (3 km) Max
Max non-operating altitude 15000 feet (4.6 km) Max
Switch Dimensions (L x W x H) Weight
Aruba Instant On 1930 8G 2SFP Switch
(JL680A)
6.4" x 9.9" x 1.72"
(16.2 x 25.35 x 4.35 cm)
2.60 lb
(1.18 kg)
Aruba Instant On 1930 8G Class4 PoE 2SFP
124W Switch (JL681A)
10.12" x 9.9" x 1.72"
(25.7 x 25.35 x 4.35 cm)
4.17 lb
(1.89 kg)
Aruba Instant On 1930 24G 4SFP/SFP+ Switch
(JL682A)
8.94" x 17.43" x 1.72"
(22.7 x 44.25 x 4.35 cm)
5.35 lb
(2.43 kg)
Aruba Instant On 1930 24G Class4 PoE
4SFP/SFP+ 195W Switch (JL683A)
10.56" x 17.43" x 1.72"
(26.8 x 44.25 x 4.35 cm)
7.65 lb
(3.47 kg)
Aruba Instant On 1930 24G Class4 PoE
4SFP/SFP+ 370W Switch (JL684A)
10.56" x 17.43" x 1.72"
(26.8 x 44.25 x 4.35 cm)
8.10 lb
(3.67 kg)
Table Continued
Page 4

Switch Dimensions (L x W x H) Weight
Aruba Instant On 1930 48G 4SFP/SFP+ Switch
(JL685A)
11.30" x 17.43" x 1.72"
(28.7 x 44.25 x 4.35 cm)
6.90 lb
(3.13 kg)
Aruba Instant On 1930 48G Class4 PoE
4SFP/SFP+ 370W Switch (JL686A )
12.76" x 17.43" x 1.72"
(32.4 x 44.25 x 4.35 cm)
10.0 lb
(4.54 kg)
Aruba Instant On 1930 Switch safety and regulatory
information
NOTE: For important safety, environmental, and regulatory information, see Safety and Compliance
Information for Server, Storage, Power, Networking, and Rack Products, available at http://www.hpe.com/
support/Safety-Compliance-EnterpriseProducts.
Table 2: Electrical information for Aruba Instant On 1930 switches requiring direct AC voltage
Switch model 1Maximum current AC Voltage Frequency range
(JL681A) Aruba Instant On 1930 8G
Class4 PoE 2SFP 124W Switch 1.7 / 0.9 A
100-127 / 200-240 50/60 Hz
(JL682A) Aruba Instant On 1930 24G
4SFP/SFP+ Switch 0.5 / 0.4 A
(JL683A) Aruba Instant On 1930 24G
Class4 PoE 4SFP/SFP+ 195W Switch 2.6 / 1.3 A
(JL684A) Aruba Instant On 1930 24G
Class4 PoE 4SFP/SFP+ 370W Switch 4.9 / 2.4 A
(JL685A) Aruba Instant On 1930 48G
4SFP/SFP+ Switch 0.8 / 0.5 A
(JL686A) Aruba Instant On 1930 48G
Class4 PoE 4SFP/SFP+ 370W Switch 5.1 / 2.5 A
1 For power, requires a direct power cord connection from an AC power source.
Table 3: Electrical information for the Aruba Instant On 1930 8G switch using an external AC power
adapter
8G (JL680A) Maximum AC
input current
DC Output
voltage
Maximum DC
output
current
Rated AC input
voltage
AC power
frequency
range
13W External AC
Adapter (5066-5562)
0.4A 12.0VDC 1.085A
100-240VAC 50/60 Hz
13W External AC
Adapter (5184-5864)
0.4A 12.0VDC 1.085A
Table Continued
Page 5

8G (JL680A) Maximum AC
input current
DC Output
voltage
Maximum DC
output
current
Rated AC input
voltage
AC power
frequency
range
13W External AC
Adapter (5300-1005)
0.4A 12.0VDC 1.085A
15W External AC
Adapter (5066-5563)
0.4A 12.0VDC 1.25A
Table 4: Safety and regulatory information for all Aruba Instant On 1930 switch models
Safety UL/CUL 69050-1: 2nd Edition; UL/CUL 63268 -1:2014; EN 60950-1:2006
+A11:2009 +A1:2010 +A12:2011+A2:2013; EN 62368-1: 2014; IEC 60950- 1:2005
+A1:2009 +A2:2013; IEC 62368-1:2014; EN 60825-1:2014 / IEC 60825-1:2014 Class
1
EMC EN 55032:2012/CISPR 32 Class A; FCC CFR 47 Part 15 Class A; VCCI-32 Class A;
ICES-003 Class A; CNS 13438 Class A; EN 55024:2015; EN55035:2017/CISPR
24/35; EN 61000-3-2: 2014; EN 61000-3-4: 2013
RoHS EN 50581:2012
NOTE: Environmental and other switch specications, such as acoustics data, are included in the latest
version of the Aruba Instant On 1930 Switches Installation and Getting Started Guide.
IMPORTANT: Use only supported Aruba transceivers with your switch. For more on transceivers, see
the latest edition of the ArubaOS-Switch and ArubaOS-CX Transceiver Guide.
When selecting a ber SFP device, make sure it can function at a temperature that is not less than the
recommended maximum operational temperature of the product. Use only an approved Laser Class 1
SFP transceiver.
Japan Power Cord Warning
Power supply instructions
WARNING: During the installation, ensure that AC power is NOT connected to the switch or external
power supply.
CAUTION:
Shock
hazard
To completely remove power from the switch, disconnect all power cords.
Interior Wiring
Warning
WARNING
FOR INDOOR USE ONLY.
The switch, AC power cord, and all connected cables are not designed for outdoor use.
Page 6

Brazil Statement Este equipamento deve ser conectado obrigatoriamente em tomada de rede de energia
elétrica que possua aterramento (três pinos), conforme a Norma NBR ABNT 5410, visando
a segurança dos usuários contra choques elétricos.)
IMPORTANT: For important safety, environmental, and regulatory information, see Safety and
Compliance Information for Server, Storage, Power, Networking, and Rack Products, available at http://
www.hpe.com/support/Safety-Compliance-EnterpriseProducts
Japan VCCI Class A
Korea EMC Class A statement
사용자 안내문
이 기기는 업무용 환경에서 사용할 목적으로 적합성평가를 받은 기기로서
가정용 환경에서 사용하는경우 전파간섭의 우려가 있습니다.
European Community
The product herewith complies with the requirements of Directive 2014/35/EU relating to electrical equipment
designed for use within certain voltage limits, Directive 2014/30/EU relating to electromagnetic compatibility,
Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic
equipment, and carries the CE marking accordingly.
Belarus Kazakhstan Russia marking
For manufacturer and local representative information, see Safety and Compliance Information for Server, Storage,
Power, Networking, and Rack Products at http://www.hpe.com/support/Safety-Compliance-EnterpriseProducts.
Preview of installing an Aruba Instant On 1930 Switch
IMPORTANT: This section previews the steps for installing the Aruba Instant On 1930 switches. To nd
detailed switch installation steps, conguration tools, and other information, see the latest version of
the Aruba Instant On 1930 Switches Installation and Getting Started Guide.
Page 7

1. Prepare the installation site.
2. Unpack the switch and verify that you have received the correct parts.
3. Connect power to the switch and observe the switch self-test, then remove power from the switch.
4. Mount the switch.
WARNING: Mounting restrictions apply. See the "Warning" under Installation precautions and
guidelines.
5. Connect the switch to a power source.
6. (Optional) Install transceivers.
7. Connect the network cables.
8. Congure the switch for network operation.
Documentation feedback
Send any errors, suggestions, or comments to Documentation Feedback ([email protected]).
Page 8