asecos UB-S-90 User manual

EN
Years5
Warranty*
USER MANUAL
Safety storage under bench cabinets according to EN14470-1
5 YEARS WARRANTY
Upon conclusion of an asecos service
and maintenance agreement (BasicPlus
tari ) with a fixed term of 5 years, you
will get a warranty extension for a
maximum of 5 years for your safety
storage cabinet.
For detailed information about our
warranties please visit:
EP.V.34170.00 | 09/2023

UB90.060.140.2S
UB90.060.140.UL.2S
UB90.060.140.050.2S
UB90.060.140.050.UL.2S
UB90.060.110.2S
UB90.060.110.UL.2S
UB90.060.110.050.2S
UB90.060.110.050.UL.2S
UB90.080.110.060.2S
UB90.060.110.S
UB90.060.110.UL.S
UB90.060.110.050.S
UB90.060.110.050.UL.S
UB90.060.089.S
UB90.060.089.UL.S
UB90.060.089.050.S
UB90.060.089.050.UL.S
UB90.060.059.S
UB90.060.059.UL.S
UB90.060.059.050.S
UB90.060.059.050.UL.S
UB90.080.059.060.S
UB90.060.110.2T
UB90.060.110.UL.2T
UB90.060.110.050.2T
UB90.060.110.050.UL.2T
UB90.080.110.060.2T
UB90.080.110.075.2T
UB90.060.089.2T
UB90.060.089.UL.2T
UB90.060.089.050.2T
UB90.060.089.050.UL.2T
UB90.060.059.T
UB90.060.059.TR
UB90.060.059.UL.T
UB90.060.059.UL.TR
UB90.060.059.050.T
UB90.060.059.050.TR
UB90.060.059.050.UL.T
UB90.060.059.050.UL.TR
UB90.080.059.060.T
UB90.080.059.060.TR
UB90.060.140.S2T
UB90.060.140.UL.S2T
UB90.060.140.050.S2T
UB90.060.140.050.UL.S2T
UB90.060.110.ST
UB90.060.110.UL.ST
UB90.060.110.050.ST
UB90.060.110.050.UL.ST
UB30.060.140.2S UB30.060.110.S UB30.060.110.2S UB30.060.089.S UB30.060.059.S
UB30.060.110.2T UB30.060.059.T
K90.060.110.050.UB.ST K90.060.110.050.UB.2T K90.060.140.050.UB.ST K90.060.140.050.UB.3T
UB-S-90
UB-T-90 UB-ST-90
UB-S-30
UB-T-30
K-UB-90

Contact
Company
Street
Name of contact person
email
Serial numbers of safety storage cabinets
Phone No.
Postal code Town
YOUR PERSONAL DOCUMENTATION TO THE asecos
SAFETY CABINET
Dear Customer,
you have made a decisive investment in safety for your company by purchasing this asecos safety
storage cabinet. You now own an innovative product made of top-quality materials guaranteeing
the highest quality standards.
asecos safety storage cabinets have complete authorisation documents. We archive the authori-
sation documents for every individual cabinet, keeping them ready for you should you ever need
them (e.g. for a works inspection or similar). Simply request them using this form.
Tear of or copy that page and return to us by fax with your address and serial number of the
cabinet on it.
Yours sincerely
asecos GmbH
asecos GmbH
Customer service
Weiherfeldsiedlung 16–18
D-63584 Gründau
Fax: +49 60 51 - 92 20-10
email: service asecos.com

4
EN OPERATING INSTRUCTIONS
Dear customer,
Thank you very much for purchasing a safety storage cabinet from our company, with which you have made
a decisive investment in the safety within your company. Our safety storage cabinets make the storage of
hazardous materials at the workplace safe and convenient for you.
Please read these operating instructions very carefully. Get to know the advantages and simple operability of
our safety storage cabinets in detail. This simplifies the daily handling of hazardous materials for you.
Many thanks
Your asecos team
1. NOTES • GUIDELINES • GUARANTEE ...........................................5
1.1. General safety notes ............................................... 5
1.2. Guarantee........................................................ 5
1.3. Cabinet Details.................................................... 5
1.4. Marking and symbols on the cabinet .................................. 5
2. TRANSPORT ...............................................................6
2.1. Tilting the cabinet ................................................. 6
3. ERECTION • COMMISSIONING • FUNCTION......................................6
3.1. Alignment Of The Cabinets .......................................... 6
3.2. Mobile plinth ..................................................... 7
3.3. Commissioning.................................................... 7
3.4. Anti-Tilt Device .................................................... 7
4. CLOSING MECHANISMS .....................................................8
4.1. Types Of Closing .................................................. 8
4.2. Locking .......................................................... 8
5. INTERIOR FITTINGS .........................................................8
5.1. Bottom collecting sump / drawer ..................................... 8
5.2. Perforated insert .................................................. 9
5.3. Shelves (models with wing door) ..................................... 9
5.4. Drawers (models with wing door)..................................... 9
5.5. Second level drawer (models with drawers)............................. 9
5.6. Pull-out shelves (Models K-LINE) .................................... 10
5.7. Leak s .......................................................... 10
6. STORAGE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
6.1. Models UB-LINE ...................................................11
6.2. Models K-UB-90...................................................11
7. EARTHING................................................................11
7.1. Grounding PREMIUM .............................................. 12
7.2. Grounding the interior ............................................. 12
8. VENTILATION .............................................................12
8.1. General facts .................................................... 12
8.2. Connection to technical ventilation................................... 12
9. FIRE • DISPOSAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
9.1. Opening the cabinet after the fire .................................... 13
9.2. Disposal ........................................................ 13
10. SAFETY CHECKS ...........................................................13
10.1. In general ....................................................... 13
10.2. Wearing parts .................................................... 13
11. TECHNICAL DRAWING......................................................14
12. TECHNICAL DATA ..........................................................15
12.1. Table with technical data ........................................... 15
12.2. Table with storage capacities........................................ 16

5
EN
1. NOTES • GUIDELINES • GUARANTEE
1.1. GENERAL SAFETY NOTES
• Observe applicable statutes and regulations, and the notes in these operating instructions, when handling
hazardous materials
• Work on the electrical system is to be carried out only with the power turned o and only byqualified electri-
cians – refer here to the regulations of the local electricity supply company.
• The on-site installation conditions are to be observed (e.g. bolting the cabinets to the building).
• The instructions of the supervisory engineering department must be followed.
• Observe accident prevention regulations and workplace ordinance
• Ensure that the necessary safety checks are only carried out by authorised sta using original
spare parts
• Only use the cabinet after having been properly instructed; access is to be forbidden to unauthorised persons.
• The pivoting area of the doors is to be kept free at all times; doors/drawers are to be kept closed
• By assigning trained/authorised technical personnel you can prevent the malfunctions, damage and corrosion
damage that result from inappropriate transport.
• Observe the upper limits for stored quantities, loading etc.
• Containers with a volume larger than that of the bottom collecting sump may not be placed inside the cabi-
net; spilt hazardous materials are to be collected immediately and removed
• Before storing such materials, check that the cabinet’s surface is resistant to the chemicals.
• Vessels containing aggressive chemicals (acids and alkalis) are to be kept in special cabinets for acids and
alkalis or on shelves for acids and alkalis
• Before the initial commissioning, the safety storage cabinet is to be examined by the user for possible dam-
age.
• To avoid explosive atmospheres and harmful vapours, sucient technical ventilation is strongly recommended.
Please observe the instructions for connection to an exhaust air system.
Set-up requirements
0–35 °C
30–70 %
1.2. GUARANTEE
The guarantee for this product is agreed between you (the customer) and your dealer (the seller). As the
manufacturer, asecos guarantees the products listed in the operating instructions for a period of 24 months
from the date of delivery. All model safety equipment are subject to a compulsory annual inspection by spe-
cialised sta authorised by the manufacturer. Otherwise the customer’s guarantee claim against the manufac-
turer expires.
1.3. CABINET DETAILS
A complete overview of the models can be found at the start of the operating instructions.
Cabinet data: logbook (included with the cabinet)
Technical drawing: see appenidix
Technical data: table in appendix
UB-LINE
These models are tested, certified and marked according to requirements of BS EN 14470-1.
• Models UB30: fire resistance 30 minutes
• Models UB90: fire resistance 90 minutes
• Models UB90 with UL sign: additionally tested, certified and marked according to the requirements of UL(C)
1275.
All cabinets are used for a safe, passive storage of flammable liquids in working rooms in accordance with
applicable national requirements.
K-UB-LINE
The left compartments of the cabinets are used for a safe, passive storage of flammable liquids in working
rooms in accordance with applicable national regulations and are tested, certified and marked according to
the requirements of EN 14470-1. The right compartments of the cabinets are used for a separate storage of
aggressive, non-flammable hazardous substances (e.g. acids and alkalis)
1.4. MARKING AND SYMBOLS ON THE CABINET
Various stickers with dierent symbols are attached to the cabinet. An explanation of the individual symbols
and illustrations is provided below.

6
EN
1Prohibition sign: No open
flame 2Mandatory sign: Refer to instruction manual/booklet 3Mandatory sign: Keep doors closed 4Recommendation: Connec- tion to a technical ventilation
system is recommended.
2. TRANSPORT
CAUTION:
Transport the cabinet in an upright position on a pallet truck, tied and secured against slipping, until the
final place of installation is reached.The transport locks in the door joints may only be removed directly
at the place of installation! Inappropriate transport can lead to concealed damage to the fire protection
insulation!We can only guarantee the necessary quality if the cabinet is transported to the place of its use
by our specially trained sta.
2.1. TILTING THE CABINET
3. ERECTION • COMMISSIONING • FUNCTION
3.1. ALIGNMENT OF THE CABINETS
NOTE
If the distance between door/drawer and floor is greater than 40 mm and less than 120 mm, appropriate
door panels can be used to avoid possible crushing hazards in the foot area. The matching panels for the
cabinet model can be requested free of charge at [e-mail].

7
EN
CAUTION:
Door and drawer elements must not rub against the fire protection seals in the door and drawer rebate
when opening and closing!
made of
metal!
CAUTION:
For models with a mobile plinth, this must be locked in advance. Only then can the cabinets be aligned.
3.2. MOBILE PLINTH
NOTE
If the distance between door/drawer and floor is greater than 40 mm and less than 120 mm, appropriate
door panels can be used to avoid possible crushing hazards in the foot area. The matching panels for the
cabinet model can be requested free of charge at [e-mail].
123
456
3.3. COMMISSIONING
• Before putting into operation for the first time, the user must carry out an examination of the safety storage
cabinet for possible damage, such as defective or loose sealing elements, correct alignment and perfect func-
tioning of the door elements.
Use the cabinet and accessories only if they are in an orderly condition.
3.4. ANTITILT DEVICE
Anti-tilt bracket (EP.ML.6323): Optional to prevent tilting with maximum load and fully extended

8
EN
drawers
4. CLOSING MECHANISMS
4.1. TYPES OF CLOSING
UB-LINE Standard operation:
doors/drawers must be
opened and closed manually
Event of fire: Thermal
release, open doors/
drawers close automat-
ically
K-UB-90 Standard operation:
drawers/doors must be
opened and closed manually
(all compar tments)
Event of fire: Thermal
release, open doors/
drawers close automat-
ically (storage compar-
tement for flammable
liquids)
CAUTION:
If the doors/drawers of the compartement for flammable liquids not longer latch in any position, then
the fusible link of the thermal release has tripped. The cabinet is to be returned to its delivery condition
immediately in order to avoid malfunctions.
4.2. LOCKING
CAUTION:
Applicable for all models: The owner/user must ensure that all doors and drawers are kept closed whenever
the contents of the cabinet are not being accessed! In general it must be noted that the cabinets do not
possess an emergency unlocking facility. This means that persons trapped inside the cabinet cannot free
themselves!
All models Cylinder lock
with locking state indicator
5. INTERIOR FITTINGS
CAUTION:
Loose parts (e.g. insertable sumps) must always be fully installed/inserted in order to ensure secure closing
of the cabinet doors in case of fire.
5.1. BOTTOM COLLECTING SUMP / DRAWER
1
1
2
2
According to EN 14470-1: The bottom collecting sump must be
able to hold a minimum volume of 10 %of all the containers stored
in the cabinet [1] or at least 110 %of the volume of the largest single
container [2] , whichever of these volumes is larger.

9
EN
5.2. PERFORATED INSERT
8
8
44
For use as a storage level in the bottom collecting sump / drawer
sump.
5.3. SHELVES MODELS WITH WING DOOR
• additional storage level inside the cabinet
• is installed in a fixed position in the cabinet
• is fixed on the side walls to prevent it from tipping over and being pulled out
5.4. DRAWERS MODELS WITH WING DOOR
For storage of large containers up to 30 liters with a maximized setting height in the cabinet
• Standard operatin: pull out and push in drawer manually
• Event of fire: thermal release, pulled out drawer is automatically drawn into the cabinet
Normal operation
123
Event of fire
123
45
5.5. SECOND LEVEL DRAWER MODELS WITH DRAWERS
For storage of containers with maximum height of 230 mm
• Standard operation: pull out and push in second level drawer manually
• Event of fire: thermal release, the second level drawer that is pulled out, is automatically drawn into the
cabinet when the drawer closes itself

10
EN Normal operation
123
456
Event of fire
123
45
5.6. PULLOUT SHELVES MODELS KLINE
Right compartment (for inflammable hazardous materials – acids and bases)
• Pull-out shelves are are permanently installed in the cabinet and have a pull-out protection.
• They have to be pushed into the cabinet by hand after us.
• Cabinets with pull-out shelves must be attached to the wall using an anti-tilt device (see 3.2)!
123
5.7. LEAKS
PLEASE NOTE
Liquid in the bottom collecting sump / drawer and in the sump of pull-out tray, must be taken up immedi-
ately and using suitable means. The choice of the means is your own responsibility, depending on the
leaked chemical.
bottom collecting sump
123

11
EN
drawer
123
drawer behind door
123
pull-out shelf with sump
123
6. STORAGE
Applicable for all models: Depending on the type class of the cabinet, observe therespective valid national
regulations!
6.1. MODELS UBLINE
For passive storage of flammable liquids in work rooms (see point 1.3)
• Vessels containing aggressive chemicals (acids/alkalis) are to be kept in special cabinets for acids and alkalis
or on shelves for acids and alkalis.
CAUTION:
Stored corrosive liquids can impair the function
– of the shut-o devices for the supply and exhaust air
– of self-closing in the event of fire
6.2. MODELS KUB90
• Left compartments for passive storage of flammable liquids in workrooms.
• Right compartments for passive storage of non-flammable, aggressive chemicals (e.g. acids and alkalis)
CAUTION:
Corrosive liquids stored in the left compartment aect the function of
– the shut-o devices for the supply and exhaust air
– of self-closing in the event of fire
7. EARTHING
An earth connection may be necessary, depending on the customer-specific use of the safety storage
cabinet. The decision regarding this is taken on the basis of a risk analysis by the customer.

12
EN The UB-LINE and K-UB-90 models have an earth connection on the rear
wall. The body panels are connected to one another in a metallically
conductive manner via the earth connection. The earth connection is
prepared for the creation of the on-site equipotential bonding.
7.1. GROUNDING PREMIUM
Only available in combination with cabinet for factory assembly.
Optionally, the wardrobes are equipped as follows at an extra charge:
• Additional metallic conductive connection of the doors (drawers), door handles and baseboard to the cabinet
body
• UB-LINE / K-UB-90 models with wing door(s): Article 39793 (HF.E.34360)
• UB-LINE / K-UB-90 models with drawer(s): Article 39796 (HF.E.34367
7.2. GROUNDING THE INTERIOR
Optionally, the enclosures can be equipped with a
• earthing cable (L=1100 mm) incl. terminal - article 31710 (HF.E.12704) or
• earthing cable (L=1100 mm) incl. pole terminal - Article 39148 (HF.E.33673).
The earthing cable is connected inside at the earthing connection on the rear wall of the cabinet.
8. VENTILATION
CAUTION
The fire protection valves near the supply and extraction air connections are safety and
maintenance-relevant components.
In order to check the correct operation or to replace a defective element, please ensure that flexible
connecting hoses or sliding pieces are used to connect to an extraction system in order to ensure simple
dismounting and re-mounting of the extraction air connection.
8.1. GENERAL FACTS
• If installed on an exhaust system, a check must be carried out to ensure proper connection to the system (e.g.
using a smoke tube)
8.2. CONNECTION TO TECHNICAL VENTILATION
CAUTION:
In general these models can be operated without technical ventilation. The direct environment of
the cabinet can be an explosive zone in this case. If the cabinet is to be operated without an exhaust
connection, the user must attach a marking to it. With some models the supply and exhaust connectors are
not pre-mounted. They are included with the cabinet and must be screwed to the openings on the top
section.
extraction air (a)
extraction air (b)
figure 2: cabinet with plinth
figure 3: cabinet without
plinth
• All models can be connected to a technical exhaust system via the exhaust connector. Please see the respec-
tively applicable national regulations for the specified air recirculation rate, maximum pressure losses and
exhaust air ducts.

13
EN
9. FIRE • DISPOSAL
9.1. OPENING THE CABINET AFTER THE FIRE
ATTENTION:
Only authorised personnel (e.g. fire brigade) may open the cabinet!
Depending upon the duration of the fire an ignitable vapour/air mixture may have formed; therefore remove
all sources of ignition within a 10 metre radius of the cabinet before opening it.
Use only spark-free tools !
Open the cabinets with extreme caution !
9.2. DISPOSAL
The models can be disposed of once they have been dismantled and the materials sorted.
10. SAFETY CHECKS
10.1. IN GENERAL
As safety equipment the cabinets have to be checked for safety at least once per year. The next checking date
can be taken from the service sticker on the outside of the door. This annual check can be carried out with the
necessary care, and for securing your warranty claims in the case of fire, only by an authorised asecos employ-
ee (refer also to our service brochure regarding this).
In addition, we recommend that you carry out a daily and monthly functional check:
Daily functional check
• applies to the spill containment sumps (collect and remove any leakages)
Monthly functional check
• perfect function of the doors:
- hinges
- locking system
- door closer
- door open arrest system
• correct seating and condition of the fire protection seals
Case of damage
In case of damage please contact your dealer in order to have the cabinet repaired using original spare parts.
The cabinets can be cleaned with a mild household cleaner and a soft cloth.
10.2. WEARING PARTS
Various safety-related components of the safety storage cabinet are wearing parts and must be replaced at
regular intervals by asecos Service. A list of the parts aected for your safety cabinet is available on request
from [email protected].
CONTACT:
In the case of defects or complaints about our products (within and also after the warranty period), and for
requesting safety checks or taking out a service contract, please contact our service hotline on:
Tel: [phone] | [e-mail] (for great Britain and Ireland)
Tel: [phone] | [e-mail] (international)

14
EN
800 301301
Fresh air
Earthing link
Extraction air DN 50
UB90.060.140.2S UB90.060.140.UL.2S
UB90.060.140.050.2S UB90.060.140.050.UL.2S
UB90.060.140.S2T UB90.060.140.UL.S2T
UB90.060.140.050.S2T UB90.060.140.050.UL.S2T
UB30.060.140.2S
500 301301
Fresh air
Earthing link
Extraction air DN 50
UB90.060.110.2S UB90.060.110.UL.2S
UB90.060.110.050.2S UB90.060.110.050.UL.2S
UB90.060.110.S UB90.060.110.UL.S
UB90.060.110.050.S UB90.060.110.050.UL.S
UB90.060.110.2T UB90.060.110.UL.2T
UB90.060.110.050.2T UB90.060.110.050.UL.2T
UB90.060.110.ST UB90.060.110.UL.ST
UB90.060.110.050.ST UB90.060.110.050.UL.ST
UB30.060.110.S UB30.060.110.2T
UB30.060.110.2S UB90.080.110.060.2T
UB90.080.110.060.2S UB90.080.110.050.2T
500 301301
Fresh air
Earthing link
Extraction air DN 50
UB90.080.110.075.2T
292 301301
Fresh air
Earthing link
Extraction air DN 50
UB90.060.089.S UB90.060.089.UL.S
UB90.060.089.050.S UB90.060.089.050.UL.S
UB90.060.089.2T UB90.060.089.UL.2T
UB90.060.089.050.2T UB90.060.089.050.UL.2T
UB30.060.089.S
230 182182
Fresh air
Earthing link
Extraction air
DN 50
UB90.060.059.S UB90.060.059.UL.S
UB90.060.059.050.S UB90.060.059.050.UL.S
UB90.060.059.T UB90.060.059.TR
UB90.060.059.UL.T UB90.060.059.UL.TR
UB90.060.059.050.T UB90.060.059.050.TR
UB90.060.059.050.UL.T UB90.060.059.050.UL.TR
UB30.060.059.T UB30.060.059.S
UB90.080.059.060.T UB90.080.059.060.TR
UB90.080.059.060.S
921 181
Fresh air
Earthing link
Extraction air DN 50
K90.060.140.050.UB.ST K90.060.140.050.UB.3T
740 181
Fresh air
Earthing link
Extraction air DN 50
K90.060.110.050.UB.ST K90.060.110.050.UB.2T
11. TECHNICAL DRAWING

15
EN
12. TECHNICAL DATA
12.1. TABLE WITH TECHNICAL DATA
The surface load is calculated by dividing the total weight of the cabinet (empty cabinet plus load) by its
loading area. This is calculated by multiplying the width of the cabinet by the depth (sum of the depth of the
cabinet and 1000 mm of space in front of it). The specification of the surface load in the operating instruc-
tions is a theoretical value, as the specification of the load represents the maximum permissible value for the
cabinet construction. The calculation of the individual surface load must always be based on the actual load
(weight of the interior fittings and weight of the stored containers).
EXAMPLE of the theoretical surface load calculation model UB90.060.110.2T:
Weight of cabinet 180 kg
Load: 300 kg
Working area: 1100 mm × (574+1000) mm
Calculation: 180+300 kg =480 kg =277 kg/m²
1,1 m × 1,574 m 1,731 m²
Key for “Technical data” table
1Dimensions W x D x H external 5Maximum load (kg)
2Internal dimensions W x D x H 6Distributed load (kg/m²)
3type 7Volume with 10 times air change (m³/h)
4Weight of empty cabinet(kg) 8Dierential pressure (10 times air change EK5/AK4) (Pa)
UB-LINE
Technical data 1 2 3 4 5 6 7 8
UB90.060.140.2S 1402 x 574 x 600 mm 1279 x 452 x 502 mm 90 230 300 240 3 1
UB90.060.140.UL.2S 1402 x 574 x 600 mm 1279 x 452 x 502 mm 90 230 300 240 3 1
UB90.060.140.050.2S 1402 x 502 x 600 mm 1279 x 382 x 502 mm 90 205 300 240 3 1
UB90.060.140.050.UL.2S 1402 x 502 x 600 mm 1279 x 382 x 502 mm 90 205 300 240 3 1
UB90.060.140.S2T 1402 x 574 x 600 mm 1279 x 452 x 502 mm 90 230 300 240 3 1
UB90.060.140.UL.S2T 1402 x 574 x 600 mm 1279 x 452 x 502 mm 90 230 300 240 3 1
UB90.060.140.050.S2T 1402 x 502 x 600 mm 1279 x 382 x 502 mm 90 205 300 240 3 1
UB90.060.140.050.UL.S2T 1402 x 502 x 600 mm 1279 x 382 x 502 mm 90 205 300 240 3 1
UB90.060.110.2S 1102 x 574 x 600 mm 979 x 452 x 502 mm 90 180 300 277 2 1
UB90.060.110.UL.2S 1102 x 574 x 600 mm 979 x 452 x 502 mm 90 180 300 277 2 1
UB90.060.110.050.2S 1102 x 502 x 600 mm 979 x 382 x 502 mm 90 160 300 278 2 1
UB90.060.110.050.UL.2S 1102 x 502 x 600 mm 979 x 382 x 502 mm 90 160 300 278 2 1
UB90.060.110.S 1102 x 574 x 600 mm 979 x 452 x 502 mm 90 180 300 277 2 1
UB90.060.110.UL.S 1102 x 574 x 600 mm 979 x 452 x 502 mm 90 180 300 277 2 1
UB90.060.110.050.S 1102 x 502 x 600 mm 979 x 382 x 502 mm 90 160 300 278 2 1
UB90.060.110.050.UL.S 1102 x 502 x 600 mm 979 x 382 x 502 mm 90 160 300 278 2 1
UB90.060.110.2T 1102 x 574 x 600 mm 979 x 452 x 502 mm 90 180 300 277 2 1
UB90.060.110.UL.2T 1102 x 574 x 600 mm 979 x 452 x 502 mm 90 180 300 277 2 1
UB90.060.110.050.2T 1102 x 502 x 600 mm 979 x 382 x 502 mm 90 160 300 278 2 1
UB90.060.110.050.UL.2T 1102 x 502 x 600 mm 979 x 382 x 502 mm 90 160 300 278 2 1
UB90.060.110.ST 1102 x 574 x 600 mm 979 x 452 x 502 mm 90 180 300 277 2 1
UB90.060.110.UL.ST 1102 x 574 x 600 mm 979 x 452 x 502 mm 90 180 300 277 2 1
UB90.060.110.050.ST 1102 x 502 x 600 mm 979 x 382 x 502 mm 90 160 300 278 2 1
UB90.060.110.050.UL.ST 1102 x 502 x 600 mm 979 x 382 x 502 mm 90 160 300 278 2 1
UB90.060.089.S 893 x 574 x 600 mm 771 x 452 x 502 mm 90 140 300 313 2 1
UB90.060.089.UL.S 893 x 574 x 600 mm 771 x 452 x 502 mm 90 140 300 313 1 1
UB90.060.089.050.S 893 x 502 x 600 mm 771 x 382 x 502 mm 90 125 300 317 1 1
UB90.060.089.050.UL.S 893 x 502 x 600 mm 771 x 382 x 502 mm 90 125 300 317 1 1
UB90.060.089.2T 893 x 574 x 600 mm 771 x 452 x 502 mm 90 140 300 313 2 1
UB90.060.089.UL.2T 893 x 574 x 600 mm 771 x 452 x 502 mm 90 140 300 313 1 1
UB90.060.089.050.2T 893 x 502 x 600 mm 771 x 382 x 502 mm 90 125 300 317 1 1
UB90.060.089.050.UL.2T 893 x 502 x 600 mm 771 x 382 x 502 mm 90 125 300 317 1 1
UB90.060.059.S 593 x 574 x 600 mm 470 x 452 x 502 mm 90 120 300 450 1 1
UB90.060.059.UL.S 593 x 574 x 600 mm 470 x 452 x 502 mm 90 120 300 450 1 1
UB90.060.059.050.S 593 x 502 x 600 mm 470 x 382 x 502 mm 90 110 300 460 1 1
UB90.060.059.050.UL.S 593 x 502 x 600 mm 470 x 382 x 502 mm 90 110 300 460 1 1
UB90.060.059.T 593 x 574 x 600 mm 470 x 452 x 502 mm 90 120 300 450 1 1
UB90.060.059.TR 593 x 574 x 600 mm 470 x 452 x 502 mm 90 120 300 450 1 1
UB90.060.059.UL.T 593 x 574 x 600 mm 470 x 452 x 502 mm 90 120 300 450 1 1
UB90.060.059.UL.TR 593 x 574 x 600 mm 470 x 452 x 502 mm 90 120 300 450 1 1
UB90.060.059.050.T 593 x 502 x 600 mm 470 x 382 x 502 mm 90 110 300 460 1 1

16
EN UB-LINE
Technical data 1 2 3 4 5 6 7 8
UB90.060.059.050.TR 593 x 502 x 600 mm 470 x 382 x 502 mm 90 110 300 460 1 1
UB90.060.059.050.UL.T 593 x 502 x 600 mm 470 x 382 x 502 mm 90 110 300 460 1 1
UB90.060.059.050.UL.TR 593 x 502 x 600 mm 470 x 382 x 502 mm 90 110 300 460 1 1
UB30.060.140.2S 1402 x 574 x 600 mm 1279 x 452 x 502 mm 30 230 300 240 3 1
UB30.060.110.S 1102 x 574 x 600 mm 979 x 452 x 502 mm 30 180 300 277 2 1
UB30.060.110.2T 1102 x 574 x 600 mm 979 x 452 x 502 mm 30 120 300 277 2 1
UB30.060.110.2S 1102 x 574 x 600 mm 979 x 452 x 502 mm 30 180 300 277 2 1
UB30.060.089.S 893 x 574 x 600 mm 771 x 452 x 502 mm 30 140 300 313 2 1
UB30.060.059.T 593 x 574 x 600 mm 470 x 452 x 502 mm 30 120 300 450 1 1
UB30.060.059.S 593 x 574 x 600 mm 470 x 452 x 502 mm 30 120 300 450 1 1
UB90.080.110.060.2T 1102 x 600 x 800 mm 979 x 482 x 702 mm 90 233 300 302 2 1
UB90.080.110.060.2S 1102 x 600 x 800 mm 979 x 482 x 702 mm 90 233 300 302 2 1
UB90.080.110.050.2T 1102 x 502 x 800 mm 979 x 382 x 702 mm 90 185 300 302 2 1
UB90.080.110.075.2T 1102 x 752 x 800 mm 979 x 626 x 701 mm 90 200 300 259 4 5
UB90.080.059.060.T 593 x 600 x 800 mm 470 x 482 x 702 mm 90 143 300 467 2 1
UB90.080.059.060.TR 593 x 600 x 800 mm 470 x 482 x 702 mm 90 143 300 467 2 1
UB90.080.059.060.S 593 x 600 x 800 mm 470 x 482 x 702 mm 90 143 300 467 2 1
K-LINE
Technical data 1 2 3 4 5 6 7 8
K90.060.110.050.UB.ST 1102 x 502 x 601 mm left: 470 x 380 x 502 mm
right: 440 x 468 x 562 mm
90
Left compartment
155 300 275 2 1
K90.060.110.050.UB.2T 1102 x 502 x 601 mm left: 470 x 380 x 502 mm
right: 440 x 468 x 562 mm
90
Left compartment
155 300 275 2 1
K90.060.140.050.UB.ST 1402 x 502 x 601 mm left: 770 x 380 x 502 mm
right: 440 x 468 x 562 mm
90
Left compartment
197 300 236 3 1
K90.060.140.050.UB.3T 1402 x 502 x 601 mm left: 770 x 380 x 502 mm
right: 440 x 468 x 562 mm
90
Left compartment
197 300 236 3 1
12.2. TABLE WITH STORAGE CAPACITIES
Legend for “Storage capacities” table
Load capacity (kg) of storage levels Retention capacity (ltr.) Maximum container volume in the
cabinet (ltr.)
UB-LINE
Interior equipment 1shelf 4drawer 7drawer
2perforated insert 5Drawer (disposal)
3bottom collecting sump 6Second level drawer
1 2 3 4 5 6 7 1 2 3 4 5 6 7 1 2 3 4 5 6 7
UB90.060.140.2S 75 25 50 3/5,5 11,5/20/21 2,5/5 10/18/19
UB90.060.140.UL.2S 75 25 50 3/5,5 11,5/20/21 2,5/5 10/18/19
UB90.060.140.050.2S 75 25 50 2,5/4,5 10/17,5 2/4 9/15,5
UB90.060.140.050.UL.2S 75 25 50 2,5/4,5 10/17,5 2/4 9/15,5
UB90.060.140.S2T 30 75 25 50 20/22 311,5 18/20 2,5 10
UB90.060.140.UL.S2T 30 75 25 50 20/22 311,5 18/20 2,5 10
UB90.060.140.050.S2T 30 75 25 50 11/16,5 2,5 10 10/15 2 9
UB90.060.140.050.UL.S2T 30 75 25 50 11/16,5 2,5 10 10/15 2 9
UB90.060.110.2S 75 25 50 311,5 2,5 10
UB90.060.110.UL.2S 75 25 50 311,5 2,5 10
UB90.060.110.050.2S 75 25 50 2,5 10 2 9
UB90.060.110.050.UL.2S 75 25 50 2,5 10 2 9
UB90.060.110.S 75 25 50 726/27 623/24,5
UB90.060.110.UL.S 75 25 50 726/27 623/24,5
UB90.060.110.050.S 75 25 50 621,5/22,5 519,5/20
UB90.060.110.050.UL.S 75 25 50 621,5/22,5 519,5/20
UB90.060.110.2T 30 75 50 22/25,5 15,5 20/23 14
UB90.060.110.UL.2T 30 75 50 22/25,5 15,5 20/23 14
UB90.060.110.050.2T 30 75 21/22 19/20
UB90.060.110.050.UL.2T 30 75 21/22 19/20
UB90.060.110.ST 30 75 25 50 11/12 311,5 10 2,5 10
UB90.060.110.UL.ST 30 75 25 50 11/12 311,5 10 2,5 10

17
EN
UB-LINE
Interior equipment 1shelf 4drawer 7drawer
2perforated insert 5Drawer (disposal)
3bottom collecting sump 6Second level drawer
UB90.060.110.050.ST 30 75 25 50 10/11 2,5 10 10 2 9
UB90.060.110.050.UL.ST 30 75 25 50 10/11 2,5 10 10 2 9
UB90.060.089.S 75 25 50 5,5 20/21 518/19
UB90.060.089.UL.S 75 25 50 5,5 20/21 518/19
UB90.060.089.050.S 75 25 50 4,5 16,5/17,5 415/15,5
UB90.060.089.050.UL.S 75 25 50 4,5 16,5/17,5 415/15,5
UB90.060.089.2T 30 75 50 20/22 23 18/20 20,5
UB90.060.089.UL.2T 30 75 50 20/22 23 18/20 20,5
UB90.060.089.050.2T 30 75 11/16,5 10/15
UB90.060.089.050.UL.2T 30 75 11/16,5 10/15
UB90.060.059.S 75 25 50 311,5 2,5 10
UB90.060.059.UL.S 75 25 50 311,5 2,5 10
UB90.060.059.050.S 75 25 50 2,5 10 2 9
UB90.060.059.050.UL.S 75 25 50 2,5 10 2 9
UB90.060.059.T 30 75 50 50 11/12 12 15,5/30 10 10,5 14/27
UB90.060.059.TR 30 75 50 50 11/12 12 15,5/30 10 10,5 14/27
UB90.060.059.UL.T 30 75 50 50 11/12 12 15,5/30 10 10,5 14/27
UB90.060.059.UL.TR 30 75 50 50 11/12 12 15,5/30 10 10,5 14/27
UB90.060.059.050.T 30 75 10/11 9/10
UB90.060.059.050.TR 30 75 10/11 9/10
UB90.060.059.050.UL.T 30 75 10/11 9/10
UB90.060.059.050.UL.TR 30 75 10/11 9/10
UB30.060.140.2S 75 25 50 3/5,5 11,5/20/21 2,5/5 10/18/19
UB30.060.110.S 75 25 50 726/27 623/24,5
UB30.060.110.2T 30 75 50 22/25,5 15,5 20/23 14
UB30.060.110.2S 75 25 50 311,5 2,5 10
UB30.060.089.S 75 25 50 5,5 20/21 518/19
UB30.060.059.T 30 75 50 50 11/12 12 15,5/30 10 10,5 14/27
UB30.060.059.S 75 25 50 311,5 2,5 10
UB90.080.110.060.2T 30 75 50 22/25,5 15,5 20/23 14
UB90.080.110.060.2S 75 25 50 325 2,5 22,5
UB90.080.110.050.2T 30 75 21/22 19/20
UB90.080.110.075.2T 75 60 33 33 30 30
UB90.080.059.060.T 30 75 50 50 11/12 12 15,5/30 10 10,5 14/27
UB90.080.059.060.TR 30 75 50 50 11/12 12 15,5/30 10 10,5 14/27
UB90.080.059.060.S 75 25 50 325 2,5 22,5
K-LINE
Interior equipment indi-
vidual parts (left comp.)
1shelf 2perforated insert 3bottom collecting sump
4drawer
Interior equipment indi-
vidual parts (right comp.) 5pull-out shelf
1 2 3 4 5 1 2 3 4 5 1 2 3 4 5
K90.060.140.050.UB.3T 30 75 25 11/16,5 11 10/15 10
K90.060.140.050.UB.ST 75 50 25 20 11 18 10
K90.060.110.050.UB.2T 30 75 25 10/11 11 9/10 10
K90.060.110.050.UB.ST 50 25 20 11 18 10

asecos GmbH
Sicherheit und Umweltschutz
Weiherfeldsiedlung 16–18
DE-63584 Gründau
[phone]
[phone]
[email protected]
asecos Ltd.
Safety and Environmental Protection
Profile House
Stores Road
Derby, Derbyshire
DE21 4BD
[phone]
[email protected]
asecos S.L.
Seguridad y Protección del
Medio Ambiente
C/ Calderí, s/n – Ed. CIM Vallés, planta 7,
oficinas 75-77
ES-08130 – Santa Perpètua de Mogoda
Barcelona
[phone]
[phone]
[email protected]
Asecos BV
Veiligheid en milieubescherming
Christiaan Huijgensweg 4
NL-2408 AJ Alphen a/d Rijn
[phone]
[phone]
[email protected]
asecos
Safety and Environmental Protection Inc.
c/o Schumann Burghart LLP
1500 Broadway, Suite 1902
NYC 10036, New York, USA
[phone]
[phone]
[email protected]
asecos Schweiz AG
Sicherheit und Umweltschutz
Gewerbe Brunnmatt 5
CH-6264 Pfanau
[phone]
[phone]
[email protected]
asecos SARL
Sécurité et protection de l’environnement
1, rue Pierre Simon de Laplace
FR-57070 Metz
[phone]
[email protected]
asecos AB
Säkerhet och miljöskydd
Skyttelgatan 23
753 42 Uppsala
[phone]
[email protected]