Asparion D700 User manual

Reaper
D700

1
en
Reaper
This guide shows you how to set up the D700 in Reaper. All pictures provided were
taken with Reaper 6.73 but it is also applicable to most other Reaper versions.
All files mentioned in this guide can be found on the USB drive, in the Asparion
Configurator installation folder or on our website.
If you are having trouble with anything in this guide, please contact us via our website
www.asparion.de/contact and we’ll immediately help you.
Step 1:
-Select the Reaper preset
How to select a preset is described in the main manual.

2
en
Step 2:
-Open Reaper
-Click on Options->Preferences…

3
en
Step 3:
-Go to Control Surfaces
-Click Add

4
en
Step 4:
-Select Mackie Control Universal from the list
-Select D700 as shown below

5
en
Step 5: (optional)
-If you want to connect more than one extension you should redo step 3 and 4
but select D700 (2) and Mackie Control Extender and set Surface offset to 8
(resp. 16, 24, …)
If there is only one D700 showing up, you need to enable the extensions first.
How you can do that is described in the main manual.

6
en
Step 6: (optional)
-To assign all unused buttons go to the Actions window
-Select a function and press Add…

7
en
-Press a button on the D700 to create the shortcut
-Make sure Absolute is selected

8
en
Hints:
-We recommend using Reaper with OSC and not Midi. More functions will be
available. Please refer to the separate Reaper OSC manual

9
en
For more information
visit www.asparion.de