Asparion D700 User manual

Reaper OSC
D700

1
en
Reaper OSC
This guide shows you how to set up the D700 in Reaper. All pictures provided were
taken with Reaper 6.73 but it is also applicable to most other Reaper versions.
All files mentioned in this guide can be found on the USB drive, in the Asparion
Configurator installation folder or on our website.
If you are having trouble with anything in this guide, please contact us via our website
www.asparion.de/contact and we’ll immediately help you.
Step 1:
-Instead of connecting the D700 via Midi you can also connect it via OSC. This
requires the use of the separate app Asparion Connector
How to set up the Asparion Connector is described in the main manual.
-Make sure the Asparion Connector is running
-Select the Reaper OSC preset
How to select a preset is described in the main manual.

2
en
Step 2:
-Open Reaper
-Click on Options->Preferences…

3
en
Step 3:
-Go to OSC
-Click Add

4
en
Step 4:
-Select OSC from the list
-Click on (open config directory) from the list
-Copy all the Reaper files (e.g. Asparion D700 8 Fader.ReaperOSC) in that
directory
-Select (refresh list)

5
en
Step 5:
-Configure as shown below
Make sure the ports match the ports selected in the Asparion Connector.
-If you want to connect more than one extension, select Asparion D700 16
Fader (resp. 24, 32, …) as Pattern config

6
en
Step 6: (optional)
To manually assign keys (e.g. the Magic * button), do the following:
-Go to Actions->Show action list…
-Choose an action and click Add… and then assign the button by clicking it

7
en
Hints:
-With the knobs Pan, EQ, Send and FX you can assign a function to the
encoders. With a click on the encoder, you can reset the parameter
-The EQ button will assign the Receive channels to the encoders. The actual
EQ can be controlled via the FX button like all other plugins
-In FX mode you can control the currently selected plugin. Double click the
arrow keys to change the parameter bank

8
en
For more information
visit www.asparion.de