Asparion D700 User manual

Mixbus 32C
D700

1
en
Mixbus 32C
This guide shows you how to set up the D700 in Mixbus 32C. All pictures provided
were taken with Mixbus 32C v9 but it is also applicable to most other Mixbus 32C
versions.
All files mentioned in this guide can be found on the USB drive, in the Asparion
Configurator installation folder or on our website.
If you are having trouble with anything in this guide, please contact us via our website
www.asparion.de/contact and we’ll immediately help you.
Step 1:
-Select the Mixbus 32C preset
How to select a preset is described in the main manual.

2
en
Step 2:
-Open Mixbus 32C
-Click on Edit->Preferences

3
en
Step 3:
-Go to Control Surfaces
-Check Mackie

4
en
Step 4:
-Click Show Protocol Settings on Mackie
-Select D700 as shown below

5
en
Step 5: (optional)
-If you want to connect more than one extension, go to step 4 and select
Mackie Control with One Extender (resp. Two Extenders) and select the
appropriate Midi inputs as shown below
If there is only one D700 showing up, you need to enable the extensions first.
How you can do that is described in the main manual.

6
en
Step 6: (optional)
-In the window Function Keys, it is possible to reassign buttons
-In the factory preset these are the corresponding keys:
D700
Mixbus 32C
Magic *
F1
Volume Click
F3

7
en
Hints:
-Mixbus 32C also contains a Midi-Learn-Function. To use it move the mouse
over a control and press Ctrl + Middle mouse button and then operate the
control element on the device

8
en
For more information
visit www.asparion.de