Asus AAEON GENESYS-CML5 User manual

Last Updated: January 26, 2022
GENESYS-CML5
GENESYS Compact Embedded System
User’s Manual 1st Ed

Preface II
GENESYS Compact Embedded System GENESYS-CML5
Copyright Notice
This document is copyrighted, 2022. All rights are reserved. The original manufacturer
reserves the right to make improvements to the products described in this manual at
any time without notice.
No part of this manual may be reproduced, copied, translated, or transmitted in any
form or by any means without the prior written permission of the original manufacturer.
Information provided in this manual is intended to be accurate and reliable. However,
the original manufacturer assumes no responsibility for its use, or for any infringements
upon the rights of third parties that may result from its use.
The material in this document is for product information only and is subject to change
without notice. While reasonable efforts have been made in the preparation of this
document to assure its accuracy, AAEON assumes no liabilities resulting from errors or
omissions in this document, or from the use of the information contained herein.
AAEON reserves the right to make changes in the product design without notice to its
users.

Preface III
GENESYS Compact Embedded System GENESYS-CML5
Acknowledgement
All other products’ name or trademarks are properties of their respective owners.
Microsoft Windows is a registered trademark of Microsoft Corp.
Intel, Pentium, Celeron, and Xeon are registered trademarks of Intel Corporation
Core, Atom are trademarks of Intel Corporation
ITE is a trademark of Integrated Technology Express, Inc.
IBM, PC/AT, PS/2, and VGA are trademarks of International Business Machines
Corporation.
All other product names or trademarks are properties of their respective owners.

Preface IV
GENESYS Compact Embedded System GENESYS-CML5
Packing List
Before setting up your product, please make sure the following items have been
shipped:
Item
Quantity
GENESYS-CML5
1
CPU Cooler (TH1CML5020)
1
CPU Cooler Backplate (TH6CML5010)
2
Screw (S1D3004031)
4
If any of these items are missing or damaged, please contact your distributor or sales
representative immediately.

Preface V
GENESYS Compact Embedded System GENESYS-CML5
About this Document
This User’s Manual contains all the essential information, such as detailed descriptions
and explanations on the product’s hardware and software features (if any), its
specifications, dimensions, jumper/connector settings/definitions, and driver installation
instructions (if any), to facilitate users in setting up their product.
Users may refer to the product page on AAEON.com for the latest version of this
document.

Preface VI
GENESYS Compact Embedded System GENESYS-CML5
Safety Precautions
Please read the following safety instructions carefully. It is advised that you keep this
manual for future references
1. All cautions and warnings on the device should be noted.
2. Make sure the power source matches the power rating of the device.
3. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
4. Always completely disconnect the power before working on the system’s
hardware.
5. No connections should be made when the system is powered as a sudden rush
of power may damage sensitive electronic components.
6. If the device is not to be used for a long time, disconnect it from the power
supply to avoid damage by transient over-voltage.
7. Always disconnect this device from any AC supply before cleaning.
8. While cleaning, use a damp cloth instead of liquid or spray detergents.
9. Make sure the device is installed near a power outlet and is easily accessible.
10. Keep this device away from humidity.
11. Place the device on a solid surface during installation to prevent falls
12. Do not cover the openings on the device to ensure optimal heat dissipation.
13. Watch out for high temperatures when the system is running.
14. Do not touch the heat sink or heat spreader when the system is running
15. Never pour any liquid into the openings. This could cause fire or electric shock.
16. As most electronic components are sensitive to static electrical charge, be sure to
ground yourself to prevent static charge when installing the internal components.
Use a grounding wrist strap and contain all electronic components in any
static-shielded containers.

Preface VII
GENESYS Compact Embedded System GENESYS-CML5
17. If any of the following situations arises, please the contact our service personnel:
i. Damaged power cord or plug
ii. Liquid intrusion to the device
iii. Exposure to moisture
iv. Device is not working as expected or in a manner as described in
this manual
v. The device is dropped or damaged
vi. Any obvious signs of damage displayed on the device
18. DO NOT LEAVE THIS DEVICE IN AN UNCONTROLLED ENVIRONMENT WITH
TEMPERATURES BEYOND THE DEVICE’S PERMITTED STORAGE TEMPERATURES
(SEE CHAPTER 1) TO PREVENT DAMAGE.

Preface VIII
GENESYS Compact Embedded System GENESYS-CML5
FCC Statement
This device complies with Part 15 FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received including interference that may cause
undesired operation.
Caution:
There is a danger of explosion if the battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the manufacturer. Dispose of used batteries
according to the manufacturer’s instructions and your local government’s recycling or
disposal directives.
Attention:
Il y a un risque d’explosion si la batterie est remplacée de façon incorrecte.
Ne la remplacer qu’avec le même modèle ou équivalent recommandé par le constructeur.
Recycler les batteries usées en accord avec les instructions du fabricant et les directives
gouvernementales de recyclage.

Preface IX
GENESYS Compact Embedded System GENESYS-CML5
China RoHS Requirements (CN)
产品中有毒有害物质或元素名称及含量
AAEON System QO4-381 Rev.A0
部件名称
有毒有害物质或元素
铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯
醚(PBDE)
印刷电路板
及其电子组件
×
○
○
○
○
○
外部信号
连接器及线材
×
○
○
○
○
○
外壳
○
○
○
○
○
○
中央处理器
与内存
×
○
○
○
○
○
硬盘
×
○
○
○
○
○
液晶模块
×
×
○
○
○
○
光驱
×
○
○
○
○
○
触控模块
×
○
○
○
○
○
电源
×
○
○
○
○
○
电池
×
○
○
○
○
○
本表格依据 SJ/T 11364 的规定编制。
○ ：表示该有毒有害物质在该部件所有均质材料中的含量均在
GB/T 26572标准规定的限量要求以下。
×：表示该有害物质的某一均质材料超出了GB/T 26572的限量要求，然而该
部件
仍符合欧盟指令2011/65/EU 的规范。
备注：
一、此产品所标示之环保使用期限，系指在一般正常使用状况下。
二、上述部件物质中央处理器、内存、硬盘、光驱、电源为选购品。
三、上述部件物质液晶模块、触控模块仅一体机产品适用。

Preface X
GENESYS Compact Embedded System GENESYS-CML5
China RoHS Requirement (EN)
Hazardous and Toxic Materials List
AAEON System QO4-381 Rev.A0
Component
Name
Hazardous or Toxic Materials or Elements
Lead (Pb)
Mercury (Hg)
Cadmium (Cd)
Hexavalent Chromium (Cr(VI))
Polybrominat ed biphenyls (PBBs)
Polybrominat ed diphenyl ethers (PBDEs)
PCB and
Components
X
O
O
O
O
O
Wires &
Connectors for
Ext.Connections
X
O
O
O
O
O
Chassis
O
O
O
O
O
O
CPU & RAM
X
O
O
O
O
O
HDD Drive
X
O
O
O
O
O
LCD Module
X
X
O
O
O
O
Optical Drive
X
O
O
O
O
O
Touch Control
Module
X
O
O
O
O
O
PSU
X
O
O
O
O
O
Battery
X
O
O
O
O
O
This form is prepared in compliance with the provisions of SJ/T 11364.
O: The level of toxic or hazardous materials present in this component and its parts is below the
limit specified by GB/T 26572.
X: The level of toxic of hazardous materials present in the component exceed the limits specified
by GB/T 26572, but is still in compliance with EU Directive 2011/65/EU (RoHS 2).
Notes:
1. The Environment Friendly Use Period indicated by labelling on this product is applicable only
to use under normal conditions.
2. Individual components including the CPU, RAM/memory, HDD, optical drive, and PSU are
optional.
3. LCD Module and Touch Control Module only applies to certain products which feature these
components.

Preface XI
GENESYS Compact Embedded System GENESYS-CML5
Table of Contents
Chapter 1 - Product Specifications.......................................................................................... 1
1.1 Specifications............................................................................................................2
1.2 Function Block Diagram......................................................................................... 5
Chapter 2 –Hardware Information ....................................................................................... 6
2.1 Dimensions ............................................................................................................... 7
2.2 Jumpers and Connectors......................................................................................10
2.3 List of Jumpers ........................................................................................................ 11
2.3.1 Auto Power Button Enable/Disable Selection (JP2) ...................... 11
2.3.2 Clear CMOS Jumper (JP5) .................................................................. 11
2.4 List of Connectors...................................................................................................12
2.4.1 COM Port 1/ Port 2 (CN1/CN2) .........................................................13
2.4.2 External +5VSB Input (CN3)...............................................................15
2.4.3 External Power Input (CN5)................................................................15
2.4.4 SATA Port (CN8/CN9)..........................................................................16
2.4.5 +5V Output for SATA HDD (CN10)...................................................16
2.4.6 Battery Connector (CN11)...................................................................17
2.4.7 USB 2.0 Port (CN12).............................................................................17
2.4.8 USB 2.0 Port (CN13).............................................................................18
2.4.9 FPC (CN14).............................................................................................19
2.4.10 CPU Fan (CN15).....................................................................................21
2.4.11 Front Panel Header (CN16).................................................................21
2.4.12 LAN (RJ-45) Port 1 (CN19) .................................................................22
2.4.13 LAN (RJ-45) Port 2 (CN20)................................................................22
2.4.14 USB 3.2 Gen 2 Port 1/ Port 2 (Dual Port) (CN21) ..........................24
2.4.15 DP++ Port (CN22) ..............................................................................25
2.4.16 VGA Port (CN23) .................................................................................26

Preface XII
GENESYS Compact Embedded System GENESYS-CML5
2.4.17 LPC Port (CN24) ..................................................................................27
2.4.18 BIOS Debug Port (CN25)...................................................................28
2.4.19 M.2 M-Key 2280 (CN26)....................................................................28
2.4.20 DDR4 SO-DIMM Slot (DIMM1/ DIMM2)..........................................31
2.5 Thermal Solutions..................................................................................................32
2.6 Hardware Assembly Guide..................................................................................33
2.6.1 Opening the System...........................................................................34
2.6.2 RAM Module Installation ...................................................................37
2.6.3 2.5” SATA Drive Installation................................................................38
2.6.4 External COM Port Installation .........................................................40
2.6.5 External USB2.0 Port Installation ......................................................42
2.6.6 PCI Express (PCIe [x4]) Card Installation (Optional) .....................43
2.6.7 Install Wall Mount Brackets ...............................................................45
2.6.8 VESA Mounting Kit..............................................................................46
2.6.9 Applying the Rubber Feet .................................................................47
Chapter 3 - AMI BIOS Setup ................................................................................................ 48
3.1 System Test and Initialization ..............................................................................49
3.2 AMI BIOS Setup .....................................................................................................50
3.3 Setup Submenu: Main...........................................................................................51
3.4 Setup Submenu: Advanced.................................................................................52
3.4.1 Trusted Computing .............................................................................53
3.4.2 CPU Configuration..............................................................................55
3.4.3 SATA Configuration.............................................................................57
3.4.4 Hardware Monitor...............................................................................59
3.4.4.1 Smart Fan Mode Configuration ......................................60
3.4.5 SIO Configuration ................................................................................61
3.4.5.1 Serial Port 1 Configuration ...............................................62
3.4.5.2 Serial Port 2 Configuration...............................................63

Preface XIII
GENESYS Compact Embedded System GENESYS-CML5
3.4.6 AMT Configuration .............................................................................64
3.4.7 Firmware Update Configuration.......................................................65
3.4.8 Serial Port Console Redirection........................................................66
3.4.8.1 COM0 Console Redirection Settings..............................67
3.4.8.2 Legacy Console Redirection Settings.............................69
3.4.8.3 Out-of-Band Mgmt Console Redirection Settings......70
3.4.9 Power Management ...........................................................................72
3.5 Setup Submenu: Chipset .....................................................................................73
3.5.1 North Bridge ........................................................................................74
3.5.2 PCH IO Configuration ........................................................................75
3.6 Setup Submenu: Security.....................................................................................76
3.6.1 Secure Boot ..........................................................................................77
3.6.1.1 Key Management...............................................................78
3.7 Setup Submenu: Boot ..........................................................................................80
3.7.1 BBS Priorities..........................................................................................81
3.8 Setup Submenu: Save & Exit...............................................................................82
Chapter 4 –Driver Installation ............................................................................................. 83
4.1 Driver Download/Installation ..............................................................................84
Appendix A - I/O Information.............................................................................................. 86
A.1 I/O Address Map ...................................................................................................87
A.2 Memory Address Map .........................................................................................89
A.3 IRQ Mapping Chart...............................................................................................90
Appendix B –Mating Connectors and Cables................................................................... 93
B.1 Mating Connectors and Cables..........................................................................94

GENESYS Compact Embedded System GENESYS-CML5
Chapter 1
Chapter 1 - Product Specifications

Chapter 1 –Product Specifications 2
GENESYS Compact Embedded System GENESYS-CML5
1.1 Specifications
System
Form Factor
3.5" Subcompact Board System
CPU
Intel® 10th Generation Core™
i7/i5/i3/Pentium/Celeron Processor
i7-10700TE (8C, 2.0 GHz, up to 4.4 GHz)
i5-10500TE (6C, 2.3 GHz, up to 3.7 GHz)
i3-10100TE (4C, 2.3 GHz, up to 3.6 GHz)
G6400TE (2C, 3.2 GHz)
G5900TE (2C, 3.0 GHz)
CPU TDP
35W (all processors)
Chipset
Intel® Q470E/ H420E
Memory Type
DDR4 up to 2933 MHz Dual Channel, SODIMM x
2, up to 64GB, non-ECC
BIOS
UEFI
Wake on LAN
Yes
Watchdog Timer
255 Levels
Security
TPM 2.0 (Optional)
RTC Battery
Lithium Battery 3V/240mAh
Dimensions (L x W)
8.27" x 5.28" x 3.23" (210mm x 134mm x 82mm)

Chapter 1 –Product Specifications 3
GENESYS Compact Embedded System GENESYS-CML5
Power
Power Requirement
+12V
Power Supply Type
ATX
Connector
DC Jack Connector
Power Consumption (Typical)
Intel® i7-10700TE, DDR4 3200Mhz 32GB x2,
5.64A @ +12V(Typical)
Power Consumption (Max)
Intel® i7-10700TE, DDR4 3200Mhz 32GB x2,
10.63A @ +12V(Max)
Display
Controller
Intel® HD Graphics 610/630
LVDS/eDP
-
Display Interface
DP++ x 1
VGA x 1
Multiple Display Support
2 Simultaneous Displays
External I/O
Ethernet
Intel® i210 10/100/1000Base, RJ45 x 1
Intel® i219, 10/100/1000Base, RJ45 x 1 (support
vPro on i5/i7 processors with Q470E)
USB
USB3.2 Gen2 x 2 (Q470E)
USB3.2 Gen1 x 2 (H420E)
Serial Port
COM RS232/422/485 x 2 (Optional)
Video
DP++ x 1
VGA x 1

Chapter 1 –Product Specifications 4
GENESYS Compact Embedded System GENESYS-CML5
Internal I/O
USB
USB2.0 x 4 (Optional)
Serial Port
-
SATA
SATA III x 2
+5V SATA Power Connector x 1
SMBus/I2C
I2C/SMBus (Optional)
Touch
-
Fan
4-pin Smart Fan x 1
SIM
-
Front Panel
PWR LED, Power Button
Other
FPC x 1 (Q470E only)
Expansion
Mini PCIe/mSATA
-
M.2
M-Key 2280 x 1 (PCIe [x4], SATA)
Other
-
Environment
Operating Temperature
32°F ~ 122°F (0°C ~ 50°C)
Storage Temperature
-40°F ~ 176°F (-40°C ~ 80°C)
Operating Humidity
0% ~ 90% relative humidity, non-condensing
MTBF (Hours)
380,571
EMC
CE/FCC Class A

Chapter 1 –Product Specifications 5
GENESYS Compact Embedded System GENESYS-CML5
1.2 Function Block Diagram

GENESYS Compact Embedded System GENESYS-CML5
Chapter 2
Chapter 2 –Hardware Information

Chapter 2 –Hardware Information 7
GENESYS Compact Embedded System GENESYS-CML5
2.1 Dimensions
System –Standard Version