Asus AAEON BOXER-6652 User manual

Last Updated: November 20, 2015
BOXER-6652
Fanless Embedded Box PC
User’s Manual 1st Ed

Preface II
Fanless Embedded Box PC BOXER-6652
Copyright Notice
This document is copyrighted, 2015. All rights are reserved. The original manufacturer
reserves the right to make improvements to the products described in this manual at
any time without notice.
No part of this manual may be reproduced, copied, translated, or transmitted in any
form or by any means without the prior written permission of the original manufacturer.
Information provided in this manual is intended to be accurate and reliable. However,
the original manufacturer assumes no responsibility for its use, or for any infringements
upon the rights of third parties that may result from its use.
The material in this document is for product information only and is subject to change
without notice. While reasonable efforts have been made in the preparation of this
document to assure its accuracy, AAEON assumes no liabilities resulting from errors or
omissions in this document, or from the use of the information contained herein.
AAEON reserves the right to make changes in the product design without notice to its
users.

Preface III
Fanless Embedded Box PC BOXER-6652
Acknowledgement
All other products’ name or trademarks are properties of their respective owners.
AMD®is trademark of Advanced Micro Devices.
Microsoft Windows®is a registered trademark of Microsoft Corp.
ITE is a trademark of Integrated Technology Express, Inc.
IBM, PC/AT, PS/2, and VGA are trademarks of International Business Machines
Corporation.
All other product names or trademarks are properties of their respective owners.

Preface IV
Fanless Embedded Box PC BOXER-6652
Packing List
Before setting up your product, please make sure the following items have been
shipped:
Item
Quantity
BOXER-6652
1
Wallmount bracket
2
Screw Package
1
RAM Thermal Pad (60mm x 25mm x 3mm)
1
Phoenix power connector
1
Product CD with User’s Manual (in pdf) and drivers
1
If any of these items are missing or damaged, please contact your distributor or sales
representative immediately.

Preface V
Fanless Embedded Box PC BOXER-6652
About this Document
This User’s Manual contains all the essential information, such as detailed descriptions
and explanations on the product’s hardware and software features (if any), its
specifications, dimensions, jumper/connector settings/definitions, and driver installation
instructions (if any), to facilitate users in setting up their product.
Users may refer to the AAEON.com for the latest version of this document.

Preface VI
Fanless Embedded Box PC BOXER-6652
Safety Precautions
Please read the following safety instructions carefully. It is advised that you keep this
manual for future references
1. All cautions and warnings on the device should be noted.
2. Make sure the power source matches the power rating of the device.
3. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
4. Always completely disconnect the power before working on the system’s
hardware.
5. No connections should be made when the system is powered as a sudden rush
of power may damage sensitive electronic components.
6. If the device is not to be used for a long time, disconnect it from the power
supply to avoid damage by transient over-voltage.
7. Always disconnect this device from any AC supply before cleaning.
8. While cleaning, use a damp cloth instead of liquid or spray detergents.
9. Make sure the device is installed near a power outlet and is easily accessible.
10. Keep this device away from humidity.
11. Place the device on a solid surface during installation to prevent falls
12. Do not cover the openings on the device to ensure optimal heat dissipation.
13. Watch out for high temperatures when the system is running.
14. Do not touch the heat sink or heat spreader when the system is running
15. Never pour any liquid into the openings. This could cause fire or electric shock.
16. As most electronic components are sensitive to static electrical charge, be sure to
ground yourself to prevent static charge when installing the internal components.
Use a grounding wrist strap and contain all electronic components in any
static-shielded containers.

Preface VII
Fanless Embedded Box PC BOXER-6652
17. If any of the following situations arises, please the contact our service personnel:
i. Damaged power cord or plug
ii. Liquid intrusion to the device
iii. Exposure to moisture
iv. Device is not working as expected or in a manner as described in
this manual
v. The device is dropped or damaged
vi. Any obvious signs of damage displayed on the device
18. DO NOT LEAVE THIS DEVICE IN AN UNCONTROLLED ENVIRONMENT WHERE
THE STORAGE TEMPERATURE IS BELOW -20° C (-4°F) OR ABOVE 70°C (158°F)
TO PREVENT DAMAGE.

Preface VIII
Fanless Embedded Box PC BOXER-6652
FCC Statement
This device complies with Part 15 FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received including interference that may cause
undesired operation.
Caution:
There is a danger of explosion if the battery is incorrectly replaced. Replace only with
the same or equivalent type recommended by the manufacturer. Dispose of used
batteries according to the manufacturer’s instructions and your local government’s
recycling or disposal directives.
Attention:
Il y a un risque d’explosion si la batterie est remplacée de façon incorrecte.
Ne la remplacer qu’avec le même modèle ou équivalent recommandé par le
constructeur. Recycler les batteries usées en accord avec les instructions du fabricant et
les directives gouvernementales de recyclage.

Preface IX
Fanless Embedded Box PC BOXER-6652
China RoHS Requirements (CN)
产品中有毒有害物质或元素名称及含量
AAEON Embedded Box PC/ Industrial System
部件名称
有毒有害物质或元素
铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
印刷电路板
及其电子组件
×
○
○
○
○
○
外部信号
连接器及线材
×
○
○
○
○
○
外壳
×
○
○
○
○
○
中央处理器
与内存
×
○
○
○
○
○
硬盘
×
○
○
○
○
○
电源
×
○
○
○
○
○
O：表示该有毒有害物质在该部件所有均质材料中的含量均在
SJ/T 11363-2006 标准规定的限量要求以下。
X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出
SJ/T 11363-2006 标准规定的限量要求。
备注：
一、此产品所标示之环保使用期限，系指在一般正常使用状况下。
二、上述部件物质中央处理器、内存、硬盘、电源为选购品。

Preface X
Fanless Embedded Box PC BOXER-6652
China RoHS Requirement (EN)
Poisonous or Hazardous Substances or Elements in Products
AAEON Embedded Box PC/ Industrial System
Component
Poisonous or Hazardous Substances or Elements
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
Chromium
(Cr(VI))
Polybrominated
Biphenyls
(PBB)
Polybrominated
Diphenyl Ethers
(PBDE)
PCB & Other
Components
×
○
○
○
○
○
Wires &
Connectors
for External
Connections
×
○
○
○
○
○
Chassis
×
○
○
○
○
○
CPU & RAM
×
○
○
○
○
○
Hard Disk
×
○
○
○
○
○
PSU
×
○
○
○
○
○
O：The quantity of poisonous or hazardous substances or elements found in each of the
component's parts is below the SJ/T 11363-2006-stipulated requirement.
X: The quantity of poisonous or hazardous substances or elements found in at least one of the
component's parts is beyond the SJ/T 11363-2006-stipulated requirement.
Note: The Environment Friendly Use Period as labeled on this product is applicable under normal
usage only

Preface XI
Fanless Embedded Box PC BOXER-6652
Table of Contents
Chapter 1 - Product Specifications........................................................................................ 1
1.1 Specifications............................................................................................................ 2
Chapter 2 –Hardware Information ....................................................................................... 5
2.1 Dimensions ............................................................................................................... 6
2.2 List of Jumpers ......................................................................................................... 7
2.2.1 Front Panel Connector (JP1) .......................................................... 8
2.2.2 LVDS Port Backlight Lightness Control Mode Selection (JP2) 8
2.2.3 LVDS Port Backlight Control Inverter VCC Selection (JP3) ...... 9
2.2.4 LVDS Port Operating VDD Selection (JP4).................................. 9
2.2.5 AT/ATX Control Selection (JP5)...................................................... 9
2.2.6 COM2 Ring Function Selection (JP6) ........................................... 9
2.2.7 COM1 Ring Function Selection (JP7) .........................................10
2.2.8 COM4 Function Mode Selection (JP8).......................................10
2.2.9 COM3 Function Mode Selection (JP9).......................................10
2.2.10 COM4 Termination Selection (DCD4) (JP10)............................10
2.2.11 COM4 Termination Selection (DTR4) (JP11) .............................11
2.2.12 COM3 Termination Selection (DCD4) (JP12)............................11
2.2.13 COM3 Termination Selection (DTR4) (JP13) .............................11
2.2.14 Clear COMS1 Jumper (CN23) .....................................................11
2.2.15 Clear COMS2 Jumper (CN24) .....................................................12
2.3 List of Connectors..................................................................................................13
2.3.1 Audio Connector (CN1)................................................................15
2.3.2LVDS Port (CN2).............................................................................15
2.3.3 COM Port 5 and 6 (D-SUB9) (CN3) ...........................................17
2.3.4 +5V/+12V Output for SATA HDD (CN4)...................................18
2.3.5 USB2.0 Port 6 and 7 (CN5) ..........................................................18

Preface XII
Fanless Embedded Box PC BOXER-6652
2.3.6 LVDS Port Inverter / Backlight Connector (CN6).....................19
2.3.7 UIM Card Sock (Push-Push type) (CN7)....................................19
2.3.8 CFast Slot (CN8) .............................................................................20
2.3.9 COM Port 6 (Wafer BOX, Optional) (CN9) ...............................21
2.3.10 COM Port 5 (Wafer BOX, Optional) (CN10).............................21
2.3.11 SATA2.0 Connector (CN11)..........................................................22
2.3.12 +5V / SATA Power Connector (CN12) .......................................22
2.3.13 PSON# Output (CN13).................................................................23
2.3.14 PCIe Connector (CN14)................................................................23
2.3.15 +3.3V and +5V Output (CN15) ..................................................23
2.3.16 SATA2.0 Connector (CN16)..........................................................24
2.3.17 MiniCard Slot (Full-MiniCard) (CN17)........................................24
2.3.18 MiniCard Slot (Half-MiniCard) (CN18) .......................................26
2.3.19 PS/2 Keyboard/Mouse Combo Port (CN19)............................28
2.3.20 PCH Digital IO Port (CN20)..........................................................29
2.3.21 UIM Card Socket (CN21) ..............................................................29
2.3.22 Digital IO Port (CN22)...................................................................30
2.3.23 LPC Port (CN26).............................................................................30
2.3.24 USB2.0 Port 8 and 9 (Wafer BOX, Optional) (CN29)..............31
2.3.25 USB3.0 (Wafer BOX, Optional) (CN30)......................................32
2.3.26 External Power Input (CN31) .......................................................33
2.3.27 LAN (RJ-45)+Dual USB3.0+USB2.0 (CN32)..............................33
2.3.28 HDMI Port (CN33)..........................................................................35
2.3.29 LAN (RJ-45)+ Dual USB2.0 (CN34) ............................................36
2.3.30 COM Port 1 and 2 (D-SUB 9) (CN35)........................................37
2.3.31 COM Port 3 and 4 (D-SUB 9) (CN36)........................................38
2.3.32 Adapter Power in Connector (CN37).........................................39
2.3.33 VGA+DVI-D Port (CN38)..............................................................39

Preface XIII
Fanless Embedded Box PC BOXER-6652
2.3.34 LAN2 LED (LED 1)..........................................................................41
2.3.35 LAN1 LED (LED 2)..........................................................................41
2.3.36 LAN1 LED (LED 2)..........................................................................42
2.4 Installing Components..........................................................................................43
2.4.1 Installing MiniCard .........................................................................44
2.4.2 Installing CFast/ SIM Card ............................................................45
2.4.3 Installing HDD.................................................................................46
2.4.4 Installing RAM.................................................................................48
Chapter 3 - AMI BIOS Setup ................................................................................................ 50
3.1 System Test and Initialization ..............................................................................51
3.2 AMI BIOS Setup .....................................................................................................52
3.3 Setup Submenu: Main..........................................................................................53
3.4 Setup Submenu: Advanced.................................................................................54
3.4.1 F81866 Super IO Configuration..................................................55
3.4.1.1 F81866 Super IO Configuration: Serial Port 1
Configuration..............................................................................................56
3.4.1.2 F81866 Super IO Configuration: Serial Port 2
Configuration..............................................................................................57
3.4.1.3 F81866 Super IO Configuration: Serial Port 3
Configuration..............................................................................................58
3.4.1.4 F81866 Super IO Configuration: Serial Port 4
Configuration..............................................................................................59
3.4.1.5 F81866 Super IO Configuration: Serial Port 5
Configuration..............................................................................................60
3.4.1.6 F81866 Super IO Configuration: Serial Port 6
Configuration..............................................................................................61
3.4.2 Advanced: F81866 H/W Monitor ...............................................62
3.4.3 Advanced: Power Management .................................................63

Preface XIV
Fanless Embedded Box PC BOXER-6652
3.4.4 Advanced: CPU Configuration....................................................65
3.4.5 Advanced: AMT Configuration ...................................................67
3.4.6 Advanced: Trusted Computing ...................................................68
3.4.7 Advanced: SATA Configuration...................................................69
3.4.8 Advanced: USB Configuration.....................................................70
3.4.9 Advanced: Dynamic Digital IO....................................................71
3.5 Setup submenu: Chipset......................................................................................72
3.5.1 Chipset: PCH-IO Configuration...................................................73
3.5.2 Chipset: System Agent (SA) Configuration...............................75
3.5.2.1 System Agent (SA) Configuration: Memory
Configuration..............................................................................................76
3.6 Setup submenu: Boot...........................................................................................77
3.6.1 Boot: BBS Priorities ........................................................................78
3.7 Setup submenu: Security .....................................................................................79
3.8 Setup submenu: Save & Exit ...............................................................................80
Chapter 4 –Drivers Installation............................................................................................ 81
4.1 Product CD/DVD ...................................................................................................82
Appendix A - Watchdog Timer Programming................................................................... 84
A.1 Watchdog Timer Initial Program ........................................................................85
Appendix B - I/O Information .............................................................................................. 90
B.1 I/O Address Map ...................................................................................................91
B.2 Memory Address Map .........................................................................................93
B.3 IRQ Mapping Chart...............................................................................................94
B.4 DMA Channel Assignments ..............................................................................104

Fanless Embedded Box PC BOXER-6652
Chapter 1
Chapter 1 - Product Specifications

Chapter 1 –Product Specifications 2
Fanless Embedded Box PC BOXER-6652
1.1 Specifications
System
Processor
Intel®4th Generation CPU
System Memory
204-pin DDR3L 1333/1600 MHz SODIMM x 1,
up to 16 GB
Chipset
Intel®QM87 PCH
Storage
Onboard CFast slot x 1
2.5" SATA HDD/SSD drive bay x 1
Rear I/O Panel
3-pin terminal block x 1
DB-9 for RS-232 x 2
DB-9 for RS-232/422/485 x 2 (isolation)
USB2.0 type A x 2
USB3.0 type A x 2
DB-15 for VGA x 1
DVI-D x 1
HDMI 1.4a x 1
RJ-45 for 10/100/1000Base-TX x 2
Front I/O Panel
Power button x 1
DB-9 for RS-232 x 2
CFast slot x 1
SIM slot x 1
USB2.0 typeA x 2
Line-out x 1
SMA Antenna holes x 2
Front Indicators
System LED x 1
HDD LED x1

Chapter 1 –Product Specifications 3
Fanless Embedded Box PC BOXER-6652
LAN1 Tx LED x 1
LAN1 Rx LED x 1
LAN2 Tx LED x 1
LAN2 Rx LED x 1
Expansion Slot
Mini Card slot x 2 (USB & PCIe signal)
OS Support
Windows®8.1
Windows® 7
Windows®Embedded Standard 7
Windows®Embedded Standard 8
Linux kernel 2.6.x or above
Linux Red Hat
Mechanical
Construction
Rugged aluminum chassis
Mounting
Wallmount
Dimension (W x H x D)
264.16 x 193.5 x 69.62 mm (10.4" x 7.62" x 2.74")
Gross Weight
5 Kg (11 lb)
Environmental
Operating Temperature
-20°C ~ 60°C (-4°F ~ -140°F) - with 0.5 m/s
airflow (HDD/CFast)
Storage Temperature
-20°C ~ 70°C (-4°F ~ -158°F)
Operating Humidity
5~95% @ 40°C, non-condensing
Anti-Vibration
5 Grms/ 5 ~ 500Hz Operation (CFast)
1 Grms/ 5 ~ 500 Hz/ Operation (HDD)

Chapter 1 –Product Specifications 4
Fanless Embedded Box PC BOXER-6652
Anti-Shock
50 G peak acceleration (11 msec.
duration)-CFast
20 G peak acceleration (11 msec. duration)-HDD
EMC
CE/FCC Class A
Power Supply
DC Input
9 ~ 30 V, AT or ATX

Fanless Embedded Box PC BOXER-6652
Chapter 2
Chapter 2 –Hardware Information

Chapter 2 –Hardware Information 6
Fanless Embedded Box PC BOXER-6652
2.1 Dimensions
ISOLATION
-D
BOXER-6652