Asus Aaeon NanoCOM-EHL User manual

Last Updated: October 28, 2022
NanoCOM-EHL
COM Express Module
User’s Manual 1st Ed

Preface II
COM Express Module NanoCOM-EHL
Copyright Notice
This document is copyrighted, 2022. All rights are reserved. The original manufacturer
reserves the right to make improvements to the products described in this manual at
any time without notice.
No part of this manual may be reproduced, copied, translated, or transmitted in any
form or by any means without the prior written permission of the original
manufacturer. Information provided in this manual is intended to be accurate and
reliable. However, the original manufacturer assumes no responsibility for its use, or for
any infringements upon the rights of third parties that may result from its use.
The material in this document is for product information only and is subject to change
without notice. While reasonable efforts have been made in the preparation of this
document to assure its accuracy, AAEON assumes no liabilities resulting from errors or
omissions in this document, or from the use of the information contained herein.
AAEON reserves the right to make changes in the product design without notice to its
users.

Preface III
COM Express Module NanoCOM-EHL
Acknowledgements
All other product names or trademarks are properties of their respective owners. No
ownership is implied or assumed for products, names or trademarks not herein listed
by the publisher of this document.
⚫Microsoft® Windows® is a registered trademark of Microsoft Corp.
⚫Intel®, Atom®, Pentium® and Celeron® are registered trademarks of Intel
Corporation
⚫ITE is a trademark of Integrated Technology Express, Inc.
⚫IBM, PC/AT, PS/2, and VGA are trademarks of International Business Machines
Corporation.
All other product names or trademarks are properties of their respective owners.

Preface IV
COM Express Module NanoCOM-EHL
Packing List
Before setting up your product, please make sure the following items have been
shipped:
Item
Quantity
⚫NanoCOM-EHL
1
If any of these items are missing or damaged, please contact your distributor or sales
representative immediately.

Preface V
COM Express Module NanoCOM-EHL
About this Document
This User’s Manual contains all the essential information, such as detailed descriptions
and explanations on the product’s hardware and software features (if any), its
specifications, dimensions, jumper/connector settings/definitions, and driver installation
instructions (if any), to facilitate users in setting up their product.
Users may refer to the AAEON.com for the latest version of this document.

Preface VI
COM Express Module NanoCOM-EHL
Safety Precautions
Please read the following safety instructions carefully. It is advised that you keep this
manual for future references
1. All cautions and warnings on the device should be noted.
2. Make sure the power source matches the power rating of the device.
3. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
4. Always completely disconnect the power before working on the system’s
hardware.
5. No connections should be made when the system is powered as a sudden rush
of power may damage sensitive electronic components.
6. If the device is not to be used for a long time, disconnect it from the power
supply to avoid damage by transient over-voltage.
7. Always disconnect this device from any AC supply before cleaning.
8. While cleaning, use a damp cloth instead of liquid or spray detergents.
9. Make sure the device is installed near a power outlet and is easily accessible.
10. Keep this device away from humidity.
11. Place the device on a solid surface during installation to prevent falls
12. Do not cover the openings on the device to ensure optimal heat dissipation.
13. Watch out for high temperatures when the system is running.
14. Do not touch the heat sink or heat spreader when the system is running
15. Never pour any liquid into the openings. This could cause fire or electric shock.
16. As most electronic components are sensitive to static electrical charge, be sure to
ground yourself to prevent static charge when installing the internal components.
Use a grounding wrist strap and contain all electronic components in any
static-shielded containers.

Preface VII
COM Express Module NanoCOM-EHL
17. If any of the following situations arises, please the contact our service personnel:
i. Damaged power cord or plug
ii. Liquid intrusion to the device
iii. Exposure to moisture
iv. Device is not working as expected or in a manner as described in
this manual
v. The device is dropped or damaged
vi. Any obvious signs of damage displayed on the device
18. DO NOT LEAVE THIS DEVICE IN AN UNCONTROLLED ENVIRONMENT WITH
TEMPERATURES BEYOND THE DEVICE’S PERMITTED STORAGE TEMPERATURES
(SEE CHAPTER 1) TO PREVENT DAMAGE.

Preface VIII
COM Express Module NanoCOM-EHL
FCC Statement
This device complies with Part 15 FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received including interference that may cause
undesired operation.
Caution:
There is a danger of explosion if the battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the manufacturer. Dispose of used batteries
according to the manufacturer’s instructions and your local government’s recycling or
disposal directives.
Attention:
Il y a un risque d’explosion si la batterie est remplacée de façon incorrecte.
Ne la remplacer qu’avec le même modèle ou équivalent recommandé par le constructeur.
Recycler les batteries usées en accord avec les instructions du fabricant et les directives
gouvernementales de recyclage.

Preface IX
COM Express Module NanoCOM-EHL
China RoHS Requirements (CN)
产品中有毒有害物质或元素名称及含量
AAEON Main Board/ Daughter Board/ Backplane
部件名称
有毒有害物质或元素
铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
印刷电路板
及其电子组件
X
X
○
○
○
○
外部信号
连接器及线材
X
X
○
○
○
○
O：表示该有毒有害物质在该部件所有均质材料中的含量均在
SJ/T 11363-2006 标准规定的限量要求以下。
X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出
SJ/T 11363-2006 标准规定的限量要求。
备注：此产品所标示之环保使用期限，系指在一般正常使用状况下。

Preface X
COM Express Module NanoCOM-EHL
China RoHS Requirement (EN)
Poisonous or Hazardous Substances or Elements in Products
AAEON Main Board/ Daughter Board/ Backplane
Component
Poisonous or Hazardous Substances or Elements
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
Chromium
(Cr(VI))
Polybrominated
Biphenyls
(PBB)
Polybrominated
Diphenyl Ethers
(PBDE)
PCB & Other
Components
X
X
O
O
O
○
Wires &
Connectors
for External
Connections
X
X
O
O
O
O
O：The quantity of poisonous or hazardous substances or elements found in each of the
component's parts is below the SJ/T 11363-2006-stipulated requirement.
X: The quantity of poisonous or hazardous substances or elements found in at least one of the
component's parts is beyond the SJ/T 11363-2006-stipulated requirement.
Note: The Environment Friendly Use Period as labeled on this product is applicable under normal
usage only

Preface XI
COM Express Module NanoCOM-EHL
Table of Contents
Chapter 1 - Product Specifications.......................................................................................... 1
1.1 Specifications............................................................................................................ 2
Chapter 2 –Hardware Information ....................................................................................... 4
2.1 Dimensions, Jumpers and Connectors ...............................................................5
2.2 List of Jumpers and Connectors........................................................................... 7
2.2.1 ROW A/B Connector (CN1)................................................................... 7
2.3 Function Block.........................................................................................................12
2.4 Thermal Solution Installation................................................................................13
2.4.1 Fan Assembly ..........................................................................................13
2.4.2 Heatspreader Assembly........................................................................14
Chapter 3 - AMI BIOS Setup .................................................................................................15
3.1 System Test and Initialization ...............................................................................16
3.2 AMI BIOS Setup ......................................................................................................17
3.3 Setup Submenu: Main...........................................................................................18
3.4 Setup Submenu: Advanced..................................................................................19
3.4.1 Graphics Configuration........................................................................20
3.4.1.1 LVDS Panel Configuration...................................................21
3.4.2 CPU Configuration.................................................................................22
3.4.3 Memory Configuration.........................................................................23
3.4.4 On-Module Hardware Monitor..........................................................24
3.4.4.1 Fan 1 Mode Configuration: Full Mode.............................25
3.4.4.2 Fan 1 Mode Configuration: Manual Mode by PWM ....26
3.4.4.3 Fan 1 Mode Configuration: Auto Mode by PWM.........27
3.4.5 PCH-FW Configuration............................................................................28
3.4.5.1 Firmware Update Configuration ........................................29
3.4.6 On-Module Features...............................................................................30

Preface XII
COM Express Module NanoCOM-EHL
3.4.7 Power Management ..............................................................................31
3.4.8 AAEON BIOS Robot..............................................................................32
3.4.8.1 Device Detecting Configuration.........................................34
3.5 Setup Submenu: System I/O................................................................................36
3.5.1 PCI Express Configuration...................................................................37
3.5.2 Storage Configuration..........................................................................38
3.5.3 HD Audio Configuration......................................................................39
3.5.4 Digital IO Port Configuration..............................................................40
3.5.5 SIO Configuration ..................................................................................41
3.5.5.1 Serial Port x Configuration..................................................42
3.5.6 Serial Port Console Configuration .....................................................43
3.5.7 SCS Configuration.................................................................................44
3.6 Setup Submenu: Security.....................................................................................45
3.6.1 Trusted Computing ...............................................................................46
3.6.2 Secure Boot ............................................................................................48
3.6.2.1 Key Management .................................................................49
3.7 Setup Submenu: Boot ..........................................................................................50
3.8 Setup Submenu: Save & Exit................................................................................51
Chapter 4 –Drivers Installation............................................................................................ 52
4.1 Driver Download and Installation.......................................................................53
Appendix A - I/O Information.............................................................................................. 55
A.1 I/O Address Map ...................................................................................................56
A.2 Memory Address Map .........................................................................................57
A.3 IRQ Mapping Chart...............................................................................................58

COM Express Module NanoCOM-EHL
Chapter 1
Chapter 1 - Product Specifications

Chapter 1 –Product Specifications 2
COM Express Module NanoCOM-EHL
1.1 Specifications
System
Form Factor
COM Express Mini Size, Type 10
CPU
Intel Atom® x6000E, Pentium® and Celeron®
Series Processor
CPU Frequency
Up to x6425E, 2.0GHz
Chipset
SoC
Memory Type
Onboard LPDDR4
Max. Memory Capacity
16GB
BIOS
AMI UEFI
Wake on LAN
Yes
Watchdog Timer
255 Levels
Power Requirement
+12 V and +5 VSB for ATX, +12V for AT
Power Supply Type
AT/ATX
Power Consumption (Typical)
1.44A@12V, full load, x6425E
Dimension (L x W)
3.31” x 2.17” (84mm x 55mm)
Operating Temperature
32°F ~ 140°F (0°C ~ 60°C)
Storage Temperature
-40°F ~ 185°F (-40°C ~ 85°C)
Operating Humidity
0% ~ 90% relative humidity, non-condensing
Certification
CE/FCC Class A

Chapter 1 –Product Specifications 3
COM Express Module NanoCOM-EHL
Display
Graphic Controller
Intel® UHD Graphics for 10th Gen Intel®
Processors
Video Output
Dual Display:
LVDS LCD/eDP, DDI x 1
Single Channel LVDS (18/24 bit)
I/O
Ethernet
Intel® i226IT 2.5GbE x 1
Audio
High Definition Audio Interface
USB Port
USB 2.0 x 8, USB 3.2 10Gbps x 2
Serial Port
2-Wire UART (TX/RX) x 2
HDD Interface
SATA III x 2
Expansion Slot
PCIe [x1] x 4
LPC
SMBus
I2C
GPIO
8-bit
Onboard Storage
eMMC up to 64GB (Optional)
TPM
fTPM

COM Express Module NanoCOM-EHL
Chapter 2
Chapter 2 –Hardware Information

Chapter 2 –Hardware Information 5
COM Express Module NanoCOM-EHL
2.1 Dimensions, Jumpers and Connectors
Component Side
X-series
RT1
RT2
Topside

Chapter 2 –Hardware Information 6
COM Express Module NanoCOM-EHL
Solder Side
Thermal Solution
Solderside

Chapter 2 –Hardware Information 7
COM Express Module NanoCOM-EHL
2.2 List of Jumpers and Connectors
Please refer to the table below for all of the board’s jumpers that you can configure for
your application
Label
Function
CN1
ROW A/B
2.2.1 ROW A/B Connector (CN1)
Row A
Row B
A1
GND (FIXED)
B1
GND (FIXED)
A2
GBE0_MDI3-
B2
GBE0_ACT#
A3
GBE0_MDI3+
B3
LPC_FRAME#
A4
GBE0_LINK1000#
B4
LPC_AD0
A5
GBE0_LINK2500#
B5
LPC_AD1
A6
GBE0_MDI2-
B6
LPC_AD2
A7
GBE0_MDI2+
B7
LPC_AD3
A8
GBE0_LINK#
B8
N.C
A9
GBE0_MDI1-
B9
N.C
A10
GBE0_MDI1+
B10
LPC_CLK
A11
GND (FIXED)
B11
GND (FIXED)
A12
GBE0_MDI0-
B12
PWRBTN#
A13
GBE0_MDI0+
B13
SMB_CK
A14
N.C
B14
SMB_DAT
A15
SUS_S3#
B15
SMB_ALERT#
A16
SATA0_TX+
B16
SATA1_TX+
A17
SATA0_TX-
B17
SATA1_TX-

Chapter 2 –Hardware Information 8
COM Express Module NanoCOM-EHL
Row A
Row B
A18
SUS_S4#
B18
SUS_STAT#
A19
SATA0_RX+
B19
SATA1_RX+
A20
SATA0_RX-
B20
SATA1_RX-
A21
GND (FIXED)
B21
GND (FIXED)
A22
USB3_RXN0
B22
USB3_TXN0
A23
USB3_RXP0
B23
USB3_TXP0
A24
SUS_S4#
B24
PWR_OK
A25
USB3_RX1_N
B25
USB3_TX1_N
A26
USB3_RX1_P
B26
USB3_TX1_P
A27
BATLOW#
B27
WDT
A28
ATA_ACT#
B28
N.C
A29
AC_SYNC
B29
AC_SDIN1
A30
AC_RST#
B30
AC_SDIN0
A31
GND (FIXED)
B31
GND (FIXED)
A32
AC_BITCLK
B32
SPKR
A33
AC_SDOUT
B33
I2C_CK
A34
BIOS_DIS0#
B34
I2C_DAT
A35
THRMTRIP#
B35
THRM#
A36
USB6-
B36
USB7-
A37
USB6+
B37
USB7+
A38
USB_6_7_OC#
B38
USB_4_5_OC#
A39
USB4-
B39
USB5-
A40
USB4+
B40
USB5+
A41
GND (FIXED)
B41
GND (FIXED)
A42
USB2-
B42
USB3-
A43
USB2+
B43
USB3+