AT&T CL2909 User manual

1
Quick start guide
CL2909
Speakerphone with caller ID/call waiting
LOWER
This quick start guide provides you with basic installation and use
instructions. A limited set of features are described in an abridged form.
Please refer to the online user’s manual for a full set of installation and
operation instructions at www.telephones.att.com/manuals. Before
using this AT&T product, please read Important safety information on pages
14-15 of this quick start guide.

2
Parts checklist
Your package contains:
Telephone base with mounting bracket and directory card attached
Handset
Coiled handset cord
Telephone line cord
Quick start guide
•
•
•
•
•
Basic installation
Basic steps to set up & operate your phone
1Install battery
2Install telephone base
3Wall mount installation (optional)
Common settings
4Set the date and time
5Set ringer volume
6Set contrast
Common operations
7Set home area code
9Directory
10 Speed dial
11 Caller ID
8Set local area code

3
Press down and pull to open!
Close and snap into place!
1
2
3
CAUTION: Always unplug the telephone line cord before installing new
batteries.
1Install battery
Insert 4 AA alkaline batteries!

4
1
2
LOWER
Plug!
Plug!
2Install telephone base
Plug!
Plug!
If you have DSL high-speed Internet
service, a DSL filter (not included) is
required. The DSL filter must be plugged
into the telephone wall jack.

5
1
3Wall mount installation (optional)
Slide!
Insert!
2
Press to release! Press to secure!
Flip
over!
3Plug!
Wrap!
Plug!
If you have DSL high-speed Internet service,
a DSL filter (not included) is required.
The DSL filter must be plugged into the
telephone wall jack.
Align

6
Press OPTIONS repeatedly until the screen displays:
Use the dial pad keys (0-9) to change the blinking digits.
Press or to move to the previous or next digit.
Press # (pound key) to select between AM and PM.
Press OPTIONS to save the new setting and move to the next option.
1.
2.
•
•
3.
SET CLOCK
12:00AM 1-01
Slide the ringer switch on the right
side of the telephone to adjust the
ringer volume to OFF, LO or HI.
5Set ringer volume
4Set date and time
Adjust the screen brightness to a comfortable level, from 1 (light) to 4 (dark).
Press OPTIONS repeatedly until the screen displays:
Press / until the screen displays the contrast level you prefer.
Press OPTIONS to save the setting.
1.
2.
3.
SET CONTRAST
12:00AM 1-01
2
6Set contrast

7
Press OPTIONS repeatedly until the screen displays:
Use the dial pad keys (0-9) to enter the home area code.
Press to backspace and erase a digit.
Press to move to the next digit.
Press REMOVE to delete all digits entered.
Press OPTIONS to save the setting.
1.
2.
•
•
•
3.
HOME AREA CODE?
12:00AM 1-01
HAC-_ _ _
7Set home area code
Press OPTIONS repeatedly until the screen displays:
Use the dial pad keys (0-9) to enter the local area code.
Press to backspace and erase a digit.
Press to move to the next digit.
Press REMOVE to delete all digits entered.
Press OPTIONS to save the setting.
Repeat steps 2-3 to set more local area codes.
1.
2.
•
•
•
3.
4.
LOCL AREA CODE?
12:00AM 1-01
LAC1-_ _ _
8Set local area code

8
This telephone has a directory where you can store up to 25 telephone
numbers and names. Numbers can be up to 24 digits long and names can be
up to 15 characters.
To add a directory entry:
Press DIRECTORY -> / -> STORE is flashing -> OPTIONS.
Enter the telephone number -> OPTIONS.
Enter the name -> OPTIONS.
To review and dial a directory entry:
Press DIRECTORY -> OPTIONS.
Press / to scroll through the directory -> press DISPLAY DIAL then lift
the handset to call..
To delete a directory entry:
Press DIRECTORY -> OPTIONS.
Press / to scroll to the desired directory -> REMOVE.
1.
2.
3.
1.
2.
1.
2.
9Directory
There are 14 speed dial locations (seven upper and seven lower). To access
an upper location, press a speed dial key. To access a lower location, press
LOWER, then press a speed dial key.
To assign a speed dial entry:
Press a speed dial location, or press LOWER then the desired speed dial
location.
Enter the telephone number -> PROG.
To dial a speed dial entry:
Lift the handset or press SPEAKER.
Press the desired speed dial location, or press LOWER then the desired
speed dial location.
To delete a speed dial entry:
Press the desired speed dial location, or press LOWER then the desired
speed dial location ->-> REMOVE.
1.
2.
1.
2.
10 Speed dial

9
To review the call history:
Press CALL LIST or CALL LIST to enter the call history.
Press / to scroll through the caller ID entries.
Press CLEAR to exit and return to idle mode.
To dial a caller ID entry:
Lift the handset -> press / to scroll to the desired entry -> DISPLAY DIAL.
-OR-
Press / to scroll to the desired entry -> PressPress SPEAKER.
To delete call records:
Delete a single call record
/ to scroll to the desired caller ID entry ->->-> REMOVE.
Delete all call records
When the telephone is idle, press and hold REMOVE ->-> REMOVE.
1.
2.
3.
11 Caller ID

10
Telephone operation
Mute the handset or speakerphone microphone.•
Make or answer a call using speakerphone.•
Adjust the speakerphone or handset listening
volume.
•
LOWER
LOWER
Redial the last number dialed.•
During a call, press to receive an incoming call
if you subscribe to the call waiting service from
your telephone service provider.
•
Place a call on hold.•
Press to save numbers in speed dial locations.•
LOWER
Press to delete the displayed entry.
Press and hold to remove all call history entries
when in idle mode.
•
•
Display the menu.
Save the setting and advance to the next feature
setting.
•
•
Enter the directory.•
Review call history records.
Scroll through options when in the feature menu.
•
•
Dial the displayed number.•
Press to return to idle mode.•
Press to enter lower locations of speed dial keys.•