Atlantic Furniture Columbia Staircase Bunk Bed User manual

Page 1 of 11
BUNK SAFETY WARNING
Size of Mattress and Foundation
The length and width of the upper and lower bunk mattress and foundation are as follows :
Width
37 ½”- 38 ½”
52”- 53”
LengthSize
74”- 75”
74”- 75”
Twin
Full
Thickness
9 ½” max
9 ½” max
You must use only this size mattress.
Ensure thickness of upper and lower mattress and foundation combined does not exceed 9 ½”
and that the mattress is at least 5” below upper edge of guardrails.
This Bunk Bed uses a slat kit for mattress foundation.
Replacement Parts
Replacement parts, including additional guardrails, may be obtained from any
Atlantic Furniture dealer
SAFETY WARNINGS
! !
( 1 )
( 2 )
( 3 )
( 4 )
( 5 )
( 6 )
( 7 )
( 8 )
( 9 )
(10)
(11)
(12)
(13)
Follow the information on the warnings appearing on the upper bunk end structure
and on the carton. Do not remove warning label from bed.
Always use the recommended size mattresses or mattress support, or both,
to help prevent the likehood of entrapment or falls.
Surface of mattress must be at least 5 in. (127mm) below the upper edge of guardrails.
Do not allow children under 6 years of age to use the upper bunk.
Periodically check and ensure that the guardrail, ladder, and other component are
in their proper position, free from damage, and that all connectors are tight.
Do not allow horseplay on or under the bed and prohibit jumping on the bed.
Always use ladder for entering or leaving upper bunk.
Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
Use of a night light may provide added safety precaution for a child using the upper bunk.
Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed
next to the wall, the guardrail that runs the full length of the bed should be placed against
the wall to prevent entrapment between the bed and the wall.
The use of water or sleep flotation mattresses is prohibited.
STRANGULATION HAZARD : Never attach or hang items to any part of the bunk bed
that are not designed for use with the bed; for example, but not limited to, hooks, belts
and jump ropes.
Keep these instructions for future reference.

READY
ASSEMBLY INSTRUCTIONS
Before assembling your Columbia staircase bunk bed, please read through these
Thank you for choosing Atlantic’s Staircase Bunk Bed.
This practical design offers the utmost in versatility.
(TWIN - TWIN) (TWIN - FULL) (FULL - FULL)
Adult Assembly
Allen wrench
Phillips head
Customer Supplied
screwdriver
instructions carefully. Familiarize yourself with the different parts.
Please note that you will require a Phillips head screwdriver and an Allen wrench.
COLUMBIA STAIRCASE BUNK
STAIRCASE CAN BE SET UP AT EITHER
END OF THE BUNK BED
COLUMBIA STAIRCASE BUNK Page 2 of 11
AJCB M6 X 3 ½”(90mm) - 24 pcs
Spare - 2 pcs Spare - 4 pcs
Spare - 1 pc
Spare - 1 pc
Spare - 2 pcs
Spare - 1 pc
Spare - 1 pc
Spare - 1 pc
Spare - 2 pcs
Spare - 1 pc
Spare - 1 pc
BJCB M6 X 2 1/4”(60mm) - 4 pcs
JCB M6 X 1 1/2”(35mm) - 8 pcs
C
Wood Screw 1” - 2 pcs
TWIN / TWIN FULL / FULL
E
JWood Screw 1 ½” - 6 pcs
E
K
E
FMetal Pins - 4 pcs
NOTE: WE INCLUDE SPARE HARDWARE IN CASE THE ALLEN WRENCH, JCB, BARREL NUT, WOODEN DOWEL,
WOOD BUTTON OR WOOD SCREW ARE DAMAGED DURING ASSEMBLY.
TWIN OVER FULL SHOWN
JCB M6 X 3/4”(20mm) - 1 pc
Flat Washer - 1 pc
ED
E G
Cap Nut - 3 pcs
EBarrel Nuts - 26 pcs
I
L
M
Wood screw 3/4” - 1 pc
L Bracket - 1 pc
Wood Button - 8 pcs
In Full lower panel carton
NAllen Wrench - 1 pc
HWooden Dowel - 4 pcs
8 X 30mm
HARDWARE
ATTENTION! If you receive a damaged or defective item,
please contact Atlantic Furniture at [email protected] 1-800-955-3726 / M-F 9:00-5:00 EST

PARTS LIST
Page 3 of 11
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
15
16
16
HARDWARE
A UPPER PANEL
B UPPER PANEL
LEFT, RIGHT END CAP
SHORT GUARD RAIL
WOOD BRACKET
SMALL BACK GUARD RAIL
SMALL SIDE GUARD RAIL
STAIRCASE GUARD RAIL
B-5582X
TWIN-TWIN FULL-FULL
TWIN-FULL
OR
OR
OR
B-5583X
B-5501X
B-5550X
B-5511X
B-5520X
B-54X10
LOWER PANEL
FRONT, BACK GUARDRAIL
LONG RAILS
LOWER STAIRCASE DRAWER STEP
UPPER STAIRCASE DRAWER STEP
TWIN SLAT KIT
FULL UPPER BUNK SLAT KIT
FULL LOWER BUNK SLAT KIT
OR
OR
TWIN LOWER BUNK SLAT KIT
E-65200
E-65300
E-65301
E-65200
B-521X0
B-520X0
02
10
10
13
14
03
06
07
01
04
05
04
08
09
11
12
12
12
12
11
15
16
16
COLUMBIA STAIRCASE BUNK
TWIN OVER FULL SHOWN

STEP 1
STEP 2
Attach the long rails (12) to the A upper panel (02) and B upper panel (03),
using JCB M6 X 3 ½” (A), and barrel nut (E). Tighten with the Allen wrench (N).
Twin upper panel shown. Full over Full bunk use Full upper panel.
Adult Assembly
A
E
N
JCB M6 X 3 ½”
Barrel Nut
Allen wrench
Page 4 of 11
02
03
12
12
A
A
A
E
E
E
E
Lay the twin slat kit (15) onto the bed. Fix in place using wood screws provided in the slat kit box.
FOR SLAT KIT ASSEMBLY follow assembly instructions included with slat kit.
Adult Assembly
Phillips head
Customer Supplied
screwdriver
15
COLUMBIA STAIRCASE BUNK
Twin size shown
Full Upper panel uses Full upper slat kit

Page 5 of 11
STEP 3
STEP 4
A
E
N
JCB M6 X 3 ½”
Barrel Nut
Allen wrench
Attach the guard rails (11) to the upper panel assemblies using JCB M6 X 3 ½” (A),
and barrel nut (E). Tighten with the Allen wrench (N).
A
B
B
E
E
A
A
A
A
E
E
E
E
E
E
E
A
A
Adult Assembly
Attach the short guard rail (05) to the end caps (04), using JCB M6 X 2 1/4”(B),
and barrel nut (E). Tighten with the Allen wrench (N).
11
11
Adult Assembly
B
E
N
JCB M6 X 2 1/4”
Barrel Nut
Allen wrench
Note : Screw holes on end caps
go on inside of guard rails.
05 04
04
COLUMBIA STAIRCASE BUNK

STEP 5
STEP 6
Attach the short guard rail assemblies to the upper panel assemblies as shown below,
using wood screw (I), tighten with the Phillips head screwdriver. ( Customer supplied )
Page 6 of 11
SHORT GUARD RAIL ASSEMBLIES
INSIDE VIEW
I
I
I
Note : Screw holes on end caps
go on inside of guard rails.
ZOOM IN
Attach the long rails (12) to the lower panel (10) using JCB M6 X 3 ½” (A), and barrel nut (E).
Tighten with the Allen wrench (N).
Full lower panel shown. Twin over Twin bunk use Twin lower panel.
A
E
N
JCB M6 X 3 ½”
Barrel Nut
Allen wrench
A
A
A
E
E
E12
12
10
10
Phillips head
Customer Supplied
screwdriver
I
WOOD SCREW
D6 X 1”
Adult Assembly
Adult Assembly
COLUMBIA STAIRCASE BUNK

STEP 7
STEP 8
Page 7 of 11
16
16
Lay the full slat kit (16) onto the bed. Fix in place using wood screws provided in the slat kit box.
FOR SLAT KIT ASSEMBLY follow assembly instructions included with slat kit.
Adult Assembly
Phillips head
Customer Supplied
screwdriver
Insert metal pins (F) into the holes on top of the lower panels. Lift the upper panels onto the lower
panels as shown, and fit the metal pins into the holes in the bottom of the upper panel legs.
Full size shown
Twin lower panel uses Twin slat kit
F
F
F
F
F
F
F
This step requires
two strong people.
This step requires
two strong people.
CAUTION
!
Adult Assembly
Metal Pins
F
COLUMBIA STAIRCASE BUNK
TWIN / TWIN FULL / FULL
TWIN / FULL
FF

STEP 9
STEP 10
Insert wooden dowel (H) into the lower staircase drawer step (13) as shown below.
Adult Assembly
Page 8 of 11
Adult Assembly
H
WOODEN DOWEL
Lift the upper staircase drawer step (14) onto the lower staircase drawer step (13) as shown below
and fit the wooden dowel into the holes in the bottom of the upper staircase drawer step (14).
H
H
H
H
13
14
13
COLUMBIA STAIRCASE BUNK

STEP 11
STEP 12
Attach the small side guard rail (08) to the drawer step assemblies . Using JCB M6 X 1 1/2” (C) .
Tighten with the Allen wrench (N).
Page 9 of 11
COLUMBIA STAIRCASE BUNK
N
Allen wrench
C
JCB M6 X 1 ½”
Adult Assembly
08
09
C
Attach the staircase guard rail (09) to the drawer step assemblies as shown below .
Using JCB M6 X 1 1/2” (C) and JCB M6 X 2 1/4”(B), tighten with the Allen wrench (N).
C
JCB M6 X 1 1/2”
N
Allen wrench
B
JCB M6 X 2 1/4”
Adult Assembly
C
C
C
B
B

Adult Assembly
G
STEP 13 Attach the small back guard rail (07) to the wood bracket (06) . Using JCB M6 X 1 1/2” (C) and
cap nut (G).Tighten with the Allen wrench (N).
C
C
G
07
06
07
G
N
Cap Nut
Allen wrench
C
JCB M6 X 1 ½”
Phillips head
Customer Supplied
screwdriver
N
Allen wrench
J
WOOD SCREW
6 X 1 ½”
C
JCB M6 X 1 ½”
Adult Assembly
STEP 14
Page 10 of 11
COLUMBIA STAIRCASE BUNK
C
C
J
J
J
J
Attach the small back guard rail assemblies (07) to the staircase assemblies as shown
below . Using JCB M6 X 1 1/2” (C), tighten with the Allen wrench (N).
Using wood screw (J) tighten with phillips head screwdriver. (Customer supplied )

STEP 15
Congratulations !
Your Columbia staircase bunk bed is now ready for use.
We recommend that you double check that all screws are tight,
and that all parts are secure before use and periodically check that all screws are tight to ensure lasting Safety.
Page 11 of 11
Move the bunk bed and staircase assemblies where you want to place them in the room.
Attach staircase assembly to the bunk bed assembly as shown below. Fix wood bracket
to upper bunk panel using wood screws as shown.
J
J
D
M
M
L
G
K
J
K
DL
G
J
Wood Screw
JCB M6 X 3/4”
Flat Washer L Bracket
Cap Nut
Wood Screw
D6 X 3/4”
D6 X 1 ½”
M
Wood Button
In Full lower panel carton
Phillips head
Customer Supplied
screwdriver
N
Allen wrench
Using L bracket (L), JCB (D) and cap nut (G). Tighten with Allen
wrench (N). Insert wood screw (J)(K) tighten with Phillips head
screwdriver. Lastly, cover holes with wood buttons (M)(Twin Full, Full Full ).
COLUMBIA STAIRCASE BUNK
Adult Assembly
TWIN OVER FULL SHOWN