Atlantic Furniture NANTUCKET User manual

Page 1 of 3
Adult Assembly
ASSEMBLY INSTRUCTIONS
Before assembling your Side Table, please read through these
instructions carefully and familiarize yourself with the different parts.
NANTUCKET CHAIR SIDE TABLE CHARGING STATION
NANTUCKET CHAIR SIDE TABLE CHARGING STATION
AE
D
BF
C
Flat washer - 4 pcs Wooden Dowel 3/8 X 1 1/4” - 4 pcs
Wooden Dowel 1/4” X 1 1/4” - 4 pcs
Spare - 1 pc
Spare - 1 pc
JCB M8 - 4 pcs Wood Screw - 8 pcs
Spare - 1 pc Spare - 2 pcs
Allen wrench - 1 pc
NOTE: WE INCLUDE SPARE HARDWARE IN CASE THE JCB, WOODEN DOWEL, OR WOOD SCREW ARE DAMAGED DURING ASSEMBLY.
PARTS LIST
01
02
03
04
TOP PANEL 1 PC
4 PCS
2 PCS
1 PC
LEG
SIDE PANEL
LOWER SHELF
01 02
04
03
03
ATTENTION! If you receive a damaged or defective item,
please contact Atlantic Furniture at [email protected] 1-800-955-3726 / M-F 9:00-5:00 EST
READY
ASSEMBLE
TO

Page 2 of 3
Adult Assembly
Adult Assembly
Install wooden dowels (D) and (E) into the
locator holes on (03) and (04) as shown below.
Attach first side panel (03) to side table
aligning the dowels with the holes in the
apron. Be sure the panel is centered before
tightening the wood screw (F).
F
F
D
D
D
DE
E
E
E
F
02
03
03
04
03
02
02
02
01
A
B
02
A
A
B
B
STEP 1
STEP 2 STEP 3
Attach the legs (02) to the top panel (01) using flat washers (A) and JCB (B), tighten
with Allen wrench (C), as shown below.
note: panel in center
NANTUCKET CHAIR SIDE TABLE CHARGING STATION

Attach second side panel (03) the same as the first but place the lower shelf (04) in
position by aligning the wooden dowels with the holes in the side panel.
Apply presure to eliminate any gap between the lower shelf
and the side panel and fix in place using wood screw (F).
F
F
F
Page 3 of 3
Adult Assembly
Adult Assembly
04
03
Congratulations!
Your Nantucket chair side table is now ready for use.
STEP 4
STEP 5
NANTUCKET CHAIR SIDE TABLE CHARGING STATION
To ensure lasting safety, we recommend that you periodically check
that all screws are tight and all parts are secure.